05-09-2013, 04:12 AM | #1 |
|
Question about Heads?
I'm wanting to do some head work and add a cam as well, but I've really got no idea about what to look for or what to get as far as a set of heads. I'm thinking about going with a Vengeance stage 2 cam. I've got a 2011 SS M6 with a CAI, TSP Headers, straight pipe exhaust and a JRE tune. Any suggestions and any lessons on heads would be appreciated. Thanks.
__________________
1 7/8" TSP headers straight piped, Custom Tick Performance cam w/ supporting mods, 1" BMR springs and other BMR suspension mods. Tuned with HPtuners by Matt@FSP
|
05-09-2013, 04:23 AM | #2 |
Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012
Location: Vance Alabama
Posts: 8,018
|
A cam set up for stock cylinder heads will not be optimal for ported ones. Make sure you talk with your porter what cam grind to go with.
__________________
Retired wanna be cylinder head porter
2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X |
|
|
|
|