09-16-2010, 08:29 PM | #1 |
Drives: Camaro LS Join Date: Apr 2010
Location: Columbus GA
Posts: 354
|
Installed the V6 Stillen splitter too!
Added the Stillen V6 Splitter. I like I even installed it without taking the front off too! It was alittle bit of a pain in the butt, but ive heard taking off the front is too. But i made it work and got it on there. The tape for the sides seem VERY sturdy, i know a few people have had an issue with the tape....I figured i would give it a go with the tape and if it comes loose, i will epoxy it in place.
The way i did it without taking the front of is i had it resting on some boxes that were just the right height to support it against the car. I removed the back side of the tape and slid it into place....It took alittle bit of making sure all the tape wasnt stuck on, until i knew it was in the right position so i could adjust it. Once it was in position, stuck it all down and good to go. The tape seriously seems strong, ive put a good amount of weight on it, trying to take it off and it wont budge. I DID use dawn soap on those areas, about 5 or 6 times to make sure all the wax was off first though. We shall see how the tape holds up in the heat tomorrow though. Onto the pics. |
09-16-2010, 09:06 PM | #2 |
Mrs. Bunny to you
Drives: Not a Camaro Join Date: May 2009
Location: Cut 'N Shoot Texas
Posts: 24,336
|
I like!
|
09-16-2010, 09:08 PM | #3 |
|
looks real good
__________________
Jannetty Racing JRE Street Package
|
09-16-2010, 09:08 PM | #4 |
Drives: IOM 2SS RS M6 sunroof Join Date: Jul 2009
Location: panama city fl
Posts: 5,117
|
looks good.
|
09-16-2010, 11:05 PM | #5 |
SoCal HT5
Drives: 2013 VR 2SS/RS Join Date: May 2010
Location: Northridge, CA
Posts: 344
|
How much you get it for?
|
09-17-2010, 12:27 AM | #6 |
|
looks real good i really need to get one
|
09-17-2010, 12:33 AM | #7 |
Trust me I'm a Scientist.
|
It looks good don't paint it. It matches pretty well with your car together with the black outs!
and the item is not that expensive too, I think this will be my next mod
__________________
"From ZERO to a Tire-Burning HERO!"
Mods: RotoFab CAI, SW Headers, HiFlo Cats, Borla Atak Catback, Nightfury Cam, Ported Heads,Intake,TB, melling pump, Morosso Oil Separator. |
09-17-2010, 12:51 AM | #8 |
I have no life
Drives: 06' Subaru STI, ex-Camaro V6 LLT Join Date: Apr 2010
Location: Top Gear Test Track
Posts: 3,189
|
Yeah the splitter looks good man! =D
__________________
|
09-17-2010, 01:40 AM | #9 |
Drives: 2010 SIM 2SS/RS MONSTER Join Date: Aug 2009
Location: LOS ANGELES
Posts: 1,506
|
looks dope
__________________
HP MONSTER' SOUTHERN CALIFORNIA BUILT, LMR CAI, CUSTOM GRIND CAM, CUSTOM BUILT CNC PORTED AND POLISHED HEADS, FAST 102MM INTAKE MANIFOLD,ARH LONG TUBES AND HIGH FLOW CATS, BIGGER INJECTORS, VALVES SPRINGS RETAINERS, MGW SHORT SHIFTER, EIBACH SPRINGS, FACTORY CHROMED WHEELS, BLACKED OUT EMBLEMS, BLACKED OUT ROOF,BLACKED OUT MARKERS, 3.5 INCH ELECTRONIC CUTOUTS, FLOWMASTERS, ZEX WET 150 SHOT, FOR A GRAND TOTAL OF =630 REAR WHEEL TORQUE ,AND 600 REAR WHEEL HORSEPOWER
MY JOURNALhttp://www.camaro5.com/forums/showth...02#post2023802 SOON TWIN TURBO SETUP |
09-17-2010, 05:22 AM | #10 |
Drives: Camaro LS Join Date: Apr 2010
Location: Columbus GA
Posts: 354
|
Thanks guys! Got it from the stillen website, $149, then they charge like 9 bucks handling fee. They say free shipping, but the 9 bucks is for handling. But hell, 9 bucks isnt that much.....the box it came in is rediculously huge.
|
09-17-2010, 06:29 AM | #11 |
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 4,585
|
nice
|
09-17-2010, 01:55 PM | #12 |
Drives: White M6 1LT RS Join Date: Mar 2010
Location: Canton, MI
Posts: 1,676
|
You mentioned epoxying the splitter to the bumper if the double sided tape doesnt hold.... Don't do it!! The bumper is too flexible and epoxy is too hard... The bond will break.
The Splitter looks GREAT!!!!!! Goes well with the blacked out grill area.
__________________
Pfadt Sway Bars - FE3 Suspension - Barton Shifter - IdealG's Clutch Master Cylinder - Trifecta - Vmax TB - Vararam Intake - MACE 25mm Insulator - Plenum Insulator - Ported/Gasket Matched Intake Manifold - Rx Catchcan - AAC DRL's - 4 Pack Aux Gauges - Steering Controls - AAC Afterburners - DIY Led Sidemarkers - ZL1 Front End
Next mod: Done! |
09-17-2010, 02:03 PM | #13 |
Drives: 10 LT2/RS-08 SILVERADO-05 COBALT Join Date: Jun 2009
Location: OHIO
Posts: 929
|
Could not find it on thier web site.
__________________
Retired |
09-17-2010, 02:07 PM | #14 | |
Drives: Camaro LS Join Date: Apr 2010
Location: Columbus GA
Posts: 354
|
Quote:
What do you suggest i use? |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Camaro Dove Tail Spoilers Compilation | daphatgrant | Cosmetics and Lighting Modification Discussions | 470 | 10-28-2020 02:35 PM |
***** RK Sport SS and V6 Body Kits On Sale ***** | SicMSP | Exterior Parts & Accessories | 13 | 10-28-2010 04:36 PM |
Solo Performance V6 Mach-XL (Manual) and Mach-XLT (Auto) Exhaust Kits | GOINGSOLO2 | V6 Bolt-Ons & Tunes | 13 | 07-13-2010 01:28 PM |
Airaid V6 Just Installed! | faninc | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 94 | 12-17-2009 09:33 PM |
Anyone with Stainless Works V6 Headers Installed? | Abygale | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 19 | 10-15-2009 11:49 PM |