4 Gauge Pack on made ;o) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Blacky · 12-30-2009, 01:41 PM

Hi , i would show you my own build Center console Gauge Pack ist noch ready insalled yet but nearly all is done.
At first i would Buy the 4 Gauge Pack for my 1SS , but its still not availeble.

I have used universal VDO Gauges an made my own gauge cluster with an little toutche from the Conzept Camaro

Problem was i dont have an other console panel so i have scan my original 1SS Part an have made the New one with an 3D Printer. This Part i have change to this one sanding , filling and Paint

Hope you like it

best regards from cold Germany

D1BADZ · 12-30-2009, 02:45 PM

I must say that is pretty cool

PAUL SS · 12-30-2009, 02:47 PM

Nice work Blacky, have you worked out the connections yet?

camero · 12-30-2009, 02:54 PM

WOW that's amazing! Repeating the words Black Edition 4 times is too much but everything else looks GREAT! Will you get the gauges actually working? (I don't think I've actually looked at mine once since I got the car but they look good being down there.)

Blacky · 12-30-2009, 02:57 PM

Hi , no for the conections i will use the Senders from the VDO gauges who was in the set, i give the Senders with the Car in an Garage, for an good Mechaniker i think its not an problem to find Places to mount the VDO Temp and Perssur Senders. And i think in the LS3 Engine is place for an second Sender.

thanks for the nice coments

BOOTZILLA · 12-30-2009, 02:59 PM

Does that read in Metric Volts?

Blacky · 12-30-2009, 03:07 PM

yes the 4 Gauges i made in Metric , because the original was olso in Metric.

like thin VDO gauge, here an little pic how i made this Gauge

THUMPER20X · 12-30-2009, 04:14 PM

Awesome work. Sublet them to SLP and theyll mark them up 800 % lol/. Awesome work I love people doing one off custom work. Good for you. Hot rodding at its best.................from Germany! Teach some of these North American guys some lessons lol.

bluman · 12-30-2009, 04:53 PM

very nice !

12-30-2009, 01:41 PM	#1
Blacky Drives: Camaro 2010 Join Date: Jan 2009 Location: Germany Posts: 308	4 Gauge Pack on made ;o) Hi , i would show you my own build Center console Gauge Pack ist noch ready insalled yet but nearly all is done. At first i would Buy the 4 Gauge Pack for my 1SS , but its still not availeble. I have used universal VDO Gauges an made my own gauge cluster with an little toutche from the Conzept Camaro Problem was i dont have an other console panel so i have scan my original 1SS Part an have made the New one with an 3D Printer. This Part i have change to this one sanding , filling and Paint Hope you like it best regards from cold Germany Attached Images __________________ Last edited by Blacky; 12-30-2009 at 03:15 PM.

12-30-2009, 02:45 PM	#2
D1BADZ hmmmmm Drives: 2010 IOM in-n-out 2SS Join Date: Oct 2008 Location: San Jose, Ca Posts: 1,325 View My Garage	I must say that is pretty cool __________________ "Responsibility is a Heavy Responsibilty" (Cheech)

12-30-2009, 02:47 PM	#3
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,690 View My Garage	Nice work Blacky, have you worked out the connections yet? __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein

12-30-2009, 02:54 PM	#4
camero Drives: IOM V6 RS 38808 Join Date: Jan 2007 Location: S.Detroit, Ontario Posts: 776	WOW that's amazing! Repeating the words Black Edition 4 times is too much but everything else looks GREAT! Will you get the gauges actually working? (I don't think I've actually looked at mine once since I got the car but they look good being down there.) __________________ I've known how to spell Camaro since before you were born.

12-30-2009, 02:57 PM	#5
Blacky Drives: Camaro 2010 Join Date: Jan 2009 Location: Germany Posts: 308	Hi , no for the conections i will use the Senders from the VDO gauges who was in the set, i give the Senders with the Car in an Garage, for an good Mechaniker i think its not an problem to find Places to mount the VDO Temp and Perssur Senders. And i think in the LS3 Engine is place for an second Sender. thanks for the nice coments __________________

12-30-2009, 02:59 PM	#6
BOOTZILLA Banned Drives: Black 2010 SS/RS Join Date: Dec 2009 Location: The 'Wood Posts: 196	Does that read in Metric Volts?

12-30-2009, 03:07 PM	#7
Blacky Drives: Camaro 2010 Join Date: Jan 2009 Location: Germany Posts: 308	yes the 4 Gauges i made in Metric , because the original was olso in Metric. like thin VDO gauge, here an little pic how i made this Gauge Attached Images __________________

12-30-2009, 04:14 PM	#8
THUMPER20X GM fix my PAINT U suck! Drives: 2010 Black 1SS/RS 6Spd Join Date: Sep 2009 Location: Great Red North Posts: 1,856	Awesome work. Sublet them to SLP and theyll mark them up 800 % lol/. Awesome work I love people doing one off custom work. Good for you. Hot rodding at its best.................from Germany! Teach some of these North American guys some lessons lol. __________________

12-30-2009, 04:53 PM	#9
bluman Drives: '10 Corvette GS/'13 Mustang Join Date: May 2009 Location: Long Island NY Posts: 636	very nice ! __________________ 2010 Camaro SIM/CGM RS/2LT VIN #310 SOLD 2010 Corvette Grand Sport

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Something To Think About!!	3whiterag	General Automotive + Other Cars Discussion	15	06-06-2012 05:44 PM
4 pack gauge cluster	bkkendrick	Cosmetics and Lighting Modification Discussions	7	10-28-2009 06:17 AM
Water temp gauge	cowboy1948	5th Gen Camaro SS LS LT General Discussions	0	10-23-2009 08:09 PM
AeroForce Interceptor Gauge Install	tjd24	Audio / Visual / Electronics/ Gauges / Nav	7	10-21-2009 08:38 AM
Going Green, Means going Made In China	One Mean Chevy	Off-topic Discussions	0	04-26-2009 12:04 AM