You are browsing camaro5 
 |
|
02-03-2014, 06:54 PM
|
#1 |
|
LaLu
Drives: 2LT/RS ABM lowered Join Date: May 2013
Location: dirty jersey
Posts: 12
|
HELP! car at dealer for p0300 n p0303 code
hey just wanted some advice, my cars at a dealership right now for the second time! same code p0300 but now it also has a p0303 code, they are trying to tell me its due to the oil level being low. has any heard of this before?
|
|
|
|
02-03-2014, 07:37 PM
|
#2 |
 
Drives: 2010 camaro with fast lane stage 2 Join Date: Apr 2011
Location: hagerstown
Posts: 705
|
yes if you roil is low it will cause ,misfires but possible coil going bad i have replaced a bunch at my dealership where i work the 6cy ones are known tell them to put oil in it and stress the engine to see if they get a misfire most of the time it happens on a load or after it gets warm
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back   |
|
|
|
|
02-03-2014, 07:49 PM
|
#3 |
|
LaLu
Drives: 2LT/RS ABM lowered Join Date: May 2013
Location: dirty jersey
Posts: 12
|
what is it that you replace if the code stay after the oil change? I use a high grade oil and I brought them the oil to do the oil change cause I didn't want their oil in the car
|
|
|
|
|
02-04-2014, 07:36 PM
|
#4 |
|
Drives: 2010 camaro with fast lane stage 2 Join Date: Apr 2011
Location: hagerstown
Posts: 705
|
the coil and plug only if its just that cylinder that is misfiring
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back |
|
|
|
 |
|
|
