10-10-2011, 04:23 PM | #29 |
Drives: 2010 IOM 2LT RS, 08 IOM G8 GT, 87ta Join Date: Dec 2009
Location: Indiana
Posts: 591
|
did we ever figure out your answer?
a two step is only really used on a turbo car, probably could use it on a sc car but it allows you to have two rev limiters, one with the clutch out and one with the clutch in. so to build boost, instead of redlining it and run the risk of damage and blowing the tires off when you launch, you put a two step in and if you build max boost at 3 grand then you set it at 3,000 so its like a pretend rev limiter so you build max boost and you dont have to watch your gas and hold it at a certain rpm, just floor it and go. two step is an aftermarket item but with the SS they sorta have that system with the competitive mode. as to your LT1 comment, my buddy has one and yeah they dont have a rev limiter. but when you hear it tacking out its because its the actual limit on the rotating assembly and it simply cant spin over any faster
__________________
1000 = Order Placed (11/16/2009) RS Constraint
1100 = Preliminary Order Accepted (1/9/2010) Order # NSPHF8 2000 = Accepted by GM (1/12/2010) 2500 = Preferenced (1/12/2010) 3000 = Accepted by Production (1/13/2010) TPW = (2/8/2010) 3100 = Sequenced (1/29/2010) 3300 = Scheduled (1/29/2010) 3400 = Broadcast (1/29/2010) 3800 = Produced (2/10/2010) VIN # 2G1FG1EVXA9192608 4150 = Invoiced (2/11/2010) 4200 = Shipped (2/12/2010) 5000 = Delivered to Dealer (2/24/2010) 6000 = Delivered to Customer (3/1/2010) |
10-10-2011, 06:02 PM | #30 |
Drives: 2010 Camaro SS,2008 Hayabusa Join Date: Jun 2010
Location: Yukon,Oklahoma
Posts: 621
|
Man that engine bay looks like crap.
|
10-10-2011, 06:04 PM | #31 |
Drives: 2010 Camaro SS,2008 Hayabusa Join Date: Jun 2010
Location: Yukon,Oklahoma
Posts: 621
|
they should have just put a maggie in there.
|
10-10-2011, 06:12 PM | #32 |
Married
Drives: 2011 Camaro 1LT/RS Join Date: Jan 2011
Location: Tucson, AZ
Posts: 199
|
good video but i was expecting a lot more. still good though. i want one
|
10-10-2011, 06:23 PM | #33 |
Quit being a pu$$y
|
Booo on the title. This was more of a peel out not a burn out.
__________________
|
10-10-2011, 07:11 PM | #34 |
Drives: 2000 Z28. 2010 1SS IMB. Join Date: Aug 2009
Location: New Mexico
Posts: 1,081
|
__________________
1990 RS = First Car -SOLD
2000 Z28 = SOLD 2010 1SS/RS = Mysstique Whipple Supercharger Dyno= 618hp 555tq at the wheels IMB Silver Stripes VIN#44025 Born: 9/9/09 Delivered: 9/28/09 |
10-10-2011, 07:16 PM | #35 |
Drives: 97Z,02TA Join Date: Mar 2011
Location: TX
Posts: 174
|
My 97 LT1 has a rev limiter. I think its like 6100 I think, not sure. I've only hit it a handfull of times.
|
10-10-2011, 08:31 PM | #36 |
H-Town Camaro Club Member
Drives: 17 Hyper Blue Metallic KLR-ZL1 Join Date: May 2009
Location: Pearland Tx.
Posts: 2,035
|
Did anyone else see the exhaust at 29 seconds and see the valve close off?
__________________
|
10-10-2011, 08:51 PM | #37 |
Drives: Fire Engine Join Date: Oct 2008
Location: WPB, Florida
Posts: 1,415
|
I hate to say it, but I agree with you. Sorry GM.
__________________
12.618 @ 110.75 Bone Stock 1/4 mile
8.165 @ 86.52 Bone Stock 1/8 mile 11.189 @ 124.44 on a 1.73 60' TVS2300 3.4 pulley, JRE tuned, Kooks LT headers and HF cats, MBRP catback exhaust, CAI intake, ADM scoop. Stock wheels/tires. Sold |
10-10-2011, 09:41 PM | #38 |
Drives: 2017 1SS Blue Join Date: Mar 2010
Location: Saint Peters, MO USA
Posts: 2,063
|
Kinda weak for the mother of all Camaros. Super sticky tires and short runway may have contributed to poor results (I hope).
__________________
|
10-10-2011, 10:43 PM | #39 |
Black Ma6ic
Drives: 2011 Camaro LS M6 Join Date: Dec 2010
Location: Los Angeles, CA
Posts: 1,471
|
I love the crackle
__________________
DT Headers l MRT v2 l Injen SRI l Hurst STS l Resonators Delete l Lowered 1.25'' l 35% Tint l Black Bowties l Tinted Tail Lights l AAC lighting l Debadged
|
10-11-2011, 09:20 AM | #40 |
American Muscle
Drives: 2010 Camaro 2SS/RS LS3 M6 Join Date: May 2010
Location: Columbus, OH
Posts: 58
|
That was a pretty weak burnout. There is definitely a lot of room for improvement in the ZL1 burnout department if you ask me.
__________________
2010 2SS/RS LS3 Blk/Blk with Cyber Gray Metallic stripes and sunroof.
Mods: Cold Air Inductions, MTI, Kooks, Borla, Ported and polished TB, Custom Dyno Tune, NGK, Hypertech, PFADT, BMR, DSS, JRE, Hurst, SLP, black out bowties. GM sure did their homework on the new camaro! I just wish it had better visibility... "HP sells cars, Torque wins races." -Shelby "There is no replacement for displacement." |
10-11-2011, 09:43 AM | #41 |
Drives: 2015 Z/28 | 2017 Viper ACR Extreme Join Date: Aug 2011
Location: Brownsburg
Posts: 1,009
|
Burnout: Let’s surround your car with concrete and obstacles on 3 sides and give you 100 feet and see how brave you are. Now do it with your buddy's car instead of yours. Obviously this was one of those 'work with what you have' scenarios. A crappy burnout is better than no burnout in R&T’s eyes. For some reason they could not find an open area to do it in? Like an open parking lot instead of that death trap? LOL.
Engine Compartment: Of course it doesn’t look good - this is a test mule / not the production engine compartment. |
10-11-2011, 10:23 AM | #42 |
Drives: 2010 CAMARO BLK 2SS/L99 Join Date: May 2009
Location: Birmingham,Al
Posts: 453
|
Not the best burnout but its a ZL1 video=
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Transcript of Camaro ZL1 Q&A Webchat with Chevrolet | Tran | Camaro ZL1 Forum - ZL1 Specific Topics | 42 | 12-22-2017 04:42 AM |
5th Gen Suspension -- The Book | JusticePete | Suspension / Brakes / Chassis | 151 | 05-07-2015 05:52 PM |
PEDDERS SUCCESSFULLY FITS 305s ON ALL 4 CORNERS! | Info@PeddersUSA.com | Suspension / Brakes / Chassis | 467 | 06-11-2013 09:45 PM |
The DEFINITIVE EXPLANATION OF CAMARO SUSPENSION, ISSUES, AND UPGRADES | Info@PeddersUSA.com | Suspension / Brakes / Chassis | 106 | 10-19-2009 06:08 PM |