09-19-2013, 10:45 PM | #1 |
Drives: 2014 Camaro 2SS 1LE Join Date: Sep 2013
Location: Mansfield, TX
Posts: 40
|
Need replacement part suggestions for 2014
I am looking to get the ADM CAI and a FAST intake manifold for my 2014 1LE, what else needs to be replaced in between? MAF sensor? Throttle Body?
|
09-19-2013, 10:57 PM | #2 |
Eh, that'll happen
Drives: 2010 2SS Join Date: Apr 2012
Location: Mesa, Arizona
Posts: 1,841
|
There is no MAF upgrade, and if youre going to do the Fast102, get the Nick Williams 102 TB. But like I said in your other post, the Fast102 is a waste of money. Just get your stock intake ported and pickup a VMAX ported throttle body, which is a questionable mod in itself. The intake parts on this engine are extremely efficient from the factory. The exhaust is where time and money should be spent.
__________________
2010 Camaro SS LS3 - No Modz
|
09-19-2013, 11:01 PM | #3 |
|
Are you planning on getting a cam and heads later? If not I personally wouldn't spend the money on the manifold or TB. Cost/HP is way too high.
|
09-20-2013, 09:22 AM | #4 |
Drives: 2014 Camaro 2SS 1LE Join Date: Sep 2013
Location: Mansfield, TX
Posts: 40
|
|
09-20-2013, 09:31 AM | #5 |
Drives: E92 BMW M3 Join Date: Oct 2012
Location: Houston
Posts: 4,496
|
I also would not waste the coin on a FAST intake. A TB isnt expensive and I think it is worth the $$ for the increased throttle response. I would say get ADM to give you a cam, headers, CAI, TB, and tune. Save the $$ wasted on the FAST intake and get some side rockers and a Anvil spoiler or something.
__________________
SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned |
09-20-2013, 09:34 AM | #6 |
|
The manifold really only helps with a head/cam combo. Spending 1500 on the manifold and 102 TB seems like a lot for only 15 HP that I've seen on here. That number is greater with higher flowing heads matched with a cam. Just sayin. Your money. I would use that 1500 on heads first. Changing the manifold, fuel rails and tb down the road is pretty easy.
|
09-20-2013, 09:38 AM | #7 |
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 4,585
|
Give us a call here at Lethal Racing. We would be happy to help you decide which mods would be best for you.
|
|
|
|
|