MACE's cold air intake Insulators finally delivered! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bmorecam · 11-02-2011, 12:46 PM

No more to see here guys.

Follow the new thread

http://camaro5.com/forums/showthread.php?t=181086

Demon Hunter · 11-02-2011, 12:59 PM

Nice! Can't wait to see what happens with these.

mydreamcar · 11-02-2011, 01:10 PM

nice

Amenti · 11-02-2011, 01:23 PM

What advantage does the insulator provide?

mhog · 11-02-2011, 01:28 PM

I think it is a intake manifold insulator, not a cold air insulator as stated in the title. It might be confusing.

bmorecam · 11-02-2011, 01:36 PM

Amenti, here ya go http://www.maceengineering.com.au/ep...Products/MI603

According to their dyno graph, the 12mm insulator gave almost 23lb of foot torque down low. If this is true then that is just amazing! When I talk to mace they told me that they gotten even more gain by going up to 25mm on their commodore.

To be honest, I be happy if I can even get half of what they gotten lol. 18mm will be raising our intake manifold by almost 3/4 of an inch. I haven't gotten to my manifold yet so I don't know what might get in the way of 12mm or 18mm, but other then having to adjust the intake I think we might be good.

bmorecam · 11-02-2011, 01:38 PM

Quote:

Originally Posted by mhog

I think it is a intake manifold insulator, not a cold air insulator as stated in the title. It might be confusing.

MACE engineering actually call it cold air intake insulator.

Hey, I didn't have no part in what is called lol

10RsCamaro · 11-02-2011, 01:47 PM

If it works as good as the chart it looks like a must have to me.

bmorecam · 11-02-2011, 01:50 PM

Quote:

Originally Posted by 10RsCamaro

If it works as good as the chart it looks like a must have to me.

That chart look too good to be true for a simple manifold spacers right? Well, mace sent me the 12mm to test fit for our camaro so I guess it's time to go into my guinea pig mode once again lol.

mhog · 11-02-2011, 01:50 PM

Quote:

Originally Posted by bmorecam

MACE engineering actually call it cold air intake insulator.

Hey, I didn't have no part in what is called lol

Wow! You are right!

10RsCamaro · 11-02-2011, 01:52 PM

Quote:

Originally Posted by bmorecam

That chart look too good to be true for a simple manifold spacers right? Well, mace sent me the 12mm to test fit for our camaro so I guess it's time to go into my guinea pig mode once again lol.

Haha thats true. sounds way to good to get 25 tq for a spacer

, but we will see. what will that 25mm get realistically? Oh and would everything line up fine with the 25mm bringing over 1 inch higher?

mhog · 11-02-2011, 01:53 PM

Quote:

Originally Posted by 10RsCamaro

If it works as good as the chart it looks like a must have to me.

If you do get one you won't be able to use your Vararam.

I have the same problem.

10RsCamaro · 11-02-2011, 01:54 PM

Quote:

Originally Posted by mhog

If you do get one you won't be able to use your Vararam.

I have the same problem.

. looks like ill be buying the ported TB instead

mhog · 11-02-2011, 01:55 PM

Quote:

Originally Posted by 10RsCamaro

. looks like ill be buying the ported TB instead

If its really good I will put my stock air box back on!

11-02-2011, 12:46 PM	#1
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	MACE's cold air intake Insulators finally delivered! No more to see here guys. Follow the new thread http://camaro5.com/forums/showthread.php?t=181086 Attached Images Last edited by bmorecam; 11-07-2011 at 04:24 PM.

11-02-2011, 12:59 PM	#2
Demon Hunter Drives: 2010 Black Camaro LT Join Date: Oct 2009 Location: So Cal Posts: 675 View My Garage	Nice! Can't wait to see what happens with these. __________________

11-02-2011, 01:10 PM	#3
mydreamcar My Dream Car Drives: 2011 SIM LS3 1SS Join Date: Jul 2009 Location: staten island Posts: 1,534	nice __________________ CAI intake/ADM Scoop/Stainless Power Headers/Dynatech cat back exhaust/Vitesse Throttle Control/ Ported Throttle Body/QTP Electric Cutouts/ 3.91 gears and janetty rear posi/ Tuned by Janetty racing

11-02-2011, 01:23 PM	#4
Amenti Drives: 2017 1SS Convertible Join Date: Feb 2010 Location: San Antonio, TX Posts: 583	What advantage does the insulator provide? __________________ Performance Mods: Injen Powerflow CAI, Doug Thorley Cat-Back Exhaust, Doug Thorley Shorty Headers, Trifecta Tune, TSW Nurburgring Wheels 20x9, 3.45 Ratio LSD Swap, VMax Black Ice-Olator Appearance Mods: RiderGraphix LS7 Front Fascia Blackout Vinyl, Gill Insert Vinyl, Rear Deck Lid Vinyl (Gloss Black), Gary's Customs Painted Bowties Coming Soon: BMR Trailing Arms

11-02-2011, 01:36 PM	#6
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	Amenti, here ya go http://www.maceengineering.com.au/ep...Products/MI603 According to their dyno graph, the 12mm insulator gave almost 23lb of foot torque down low. If this is true then that is just amazing! When I talk to mace they told me that they gotten even more gain by going up to 25mm on their commodore. To be honest, I be happy if I can even get half of what they gotten lol. 18mm will be raising our intake manifold by almost 3/4 of an inch. I haven't gotten to my manifold yet so I don't know what might get in the way of 12mm or 18mm, but other then having to adjust the intake I think we might be good. Attached Images

11-02-2011, 01:28 PM	#5
mhog Drives: 2010 V6 Camaro 2LT/RS Join Date: May 2011 Location: NC Posts: 447 View My Garage	I think it is a intake manifold insulator, not a cold air insulator as stated in the title. It might be confusing.

11-02-2011, 01:47 PM	#8
10RsCamaro Slow v6 Drives: Automatic Automobile Join Date: Oct 2011 Location: Nj Posts: 526	If it works as good as the chart it looks like a must have to me. __________________ Full bolt on 2lt/Rs. Any questions? always a pm away! Obx/Mace/Rx/Mrt/Vararam/Bcam/4.11 Gears/SS Brakes USAF. Stationed in TX

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fastlane Pipeline Cold Air Intake at Phastek Performance	Jason@Phastek	V8 Bolt-Ons & Tunes	2	03-30-2016 07:19 AM
Roto-Fab \| Engine Covers - S/C \| Fuse Relay Cover \| Radiator Cover \| Billet Oil Cap+	AutoAgenda	Exterior Parts & Accessories	14	02-06-2013 08:43 PM
Roto-Fab \| Cold Air Intakes \| Engine Covers \| Washer Reservoir Relocation Kit \| Fuse+	AutoAgenda	V8 Bolt-Ons & Tunes	7	07-11-2011 06:50 PM
VOLANT POWER CORE COLD AIR INTAKE (CAMARO SS) NOW IN STOCK!	Nick@moranoracing	V8 Bolt-Ons & Tunes	0	06-30-2010 01:45 PM