12-29-2009, 05:16 PM | #1 |
Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
Spring install and Bumpstop question
Anyone know of any install videos for a set of drop springs?
Does anyone have a pic of a before/after trimmed bumpstop? How much does the bumpstop need to be trimmed? My dad and I installed Eibachs on my '95 Cobra back in the day. Didn't know to trim the bumpstops and I don't remember aligning it either but I might have. When I get my Camaro I'll be lowering it pretty quick and will probably give it a try with my dad as well. This time I want to do it correct.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal |
12-29-2009, 07:50 PM | #2 |
__________________
Keith 2SS/RS MN6 in CGM. Delivered 6/22/09. Blown 7/29/09. Sold 12/6/10.
07 GMC Sierra |
|
12-30-2009, 07:13 PM | #3 |
Drives: 2010 AquaBlue 2SS/RS Join Date: Sep 2009
Location: Long Island
Posts: 342
|
Eibachs does not recommend a bumpstop cut . I installed today and instructions say not to to cut bumpstop.
|
12-30-2009, 10:33 PM | #4 |
Drives: BLACK 2SS/RS Join Date: Sep 2009
Location: Florida
Posts: 1,092
|
I have the Eibachs as well and talked w/their techs and was told NOT to cut/trim the bumpstops when using their 1" springs.Have had them on for over a month and no problems.
|
|
|
|
|