09-13-2010, 08:28 PM | #1 |
gmag21
|
Pfadt Suspension - Weird Sounds??
I recently installed the Pfadt lowering springs and sway bars with end links on my 2010 camaro ss. When I drive my car I am hearing this sound that is difficult to describe..
The sound usually only occurs when I am driving slowly or going over a fairly bumpy road. The sound is not loud but it is definitely noticeable.. It is almost like the sound of horse hooves but on a softer level. It's like a crunchy/bumpy sort of sound that sounds like something is being shaken or moved around. Is this normal? Has anyone experienced anything this Thanks, Grant
__________________
L99 | Billyboat Exhaust, American Racing Headers, Pfadt Springs and Sways, Tune | 350 whp / 371 tq |
09-13-2010, 08:40 PM | #2 |
Drives: 2010 2SS RS, 2007 FJC Join Date: Nov 2009
Location: SD CA
Posts: 48
|
Not normal. Most likely cause of the soft thunking or popping noises is the endlinks are not tightened. Also double check the orientation of the rear endlinks. More info here:
http://www.camaro5.com/forums/showthread.php?t=101864 |
09-13-2010, 09:03 PM | #3 |
Drives: 2010 Camaro, 2006 Z06 Join Date: Feb 2009
Location: SLC, UT
Posts: 3,370
|
Yep, TCao is correct. Check that thread out. We must stress that torque values are important. Be sure to do endlinks at 33lb/ft. and sway bar bushings at 22lb/ft. and check orientation as noted in the thread above.
Give us a call if you have any more questions! |
09-13-2010, 09:46 PM | #4 |
Drives: 2015 Camaro Z28/2016 Jeep Sahara Join Date: Mar 2010
Location: South Florida
Posts: 544
|
Crap, I have some weird sounds as well.
I brought it back to the car care center and had them check that very thing was ok, and tight. They kept it for the day, and told me it was ok, they even re tweaked the alignment after I drove it for 2 weeks. It sounds like a clunking sound, I don't like it. I will have to question them on the end links. I am no mechanic, but is it something I can see for myself? |
09-13-2010, 11:54 PM | #5 |
Blowin the doors off!
Drives: A 2013 SS RS 6M SR Join Date: Apr 2010
Location: Phoenix, AZ
Posts: 2,390
|
My end links were loose too...much better after hitting it with an impact...
__________________
2G1FS1EWXD9163847 |
09-14-2010, 08:51 AM | #6 |
Drives: Truck Join Date: Apr 2010
Location: Home
Posts: 2,439
|
I had a loose end link nut.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
My SS Camaro's tranny sounds weird in 1st and 2nd gear. | RyanSSaddict | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 2 | 03-07-2011 02:08 PM |
New Camaro video features dyno tuning and Pfadt lowered suspension | PfadtRacing | Suspension / Brakes / Chassis | 0 | 01-15-2010 04:07 PM |
New Camaro video features dyno tuning and Pfadt lowered suspension | PfadtRacing | 5th Gen Camaro SS LS LT General Discussions | 0 | 01-15-2010 03:52 PM |
Pfadt Springs and Sway Bars In Stock! *Package Deal*! | PfadtRacing | Suspension / Chassis / Brakes | 0 | 10-14-2009 05:41 PM |