Hoosiers D.O.T Drag Radial 2 - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Mkn95u0 · 11-21-2017, 02:07 PM

Quote:

Originally Posted by GR8WHITE1

Where did you get the 18" ZL1 replica wheels?

factory reproductions, they should have a post here as well that you can contact them through and they'll give you pricing. or you can google their site and buy online.

Mkn95u0 · 11-21-2017, 02:09 PM

Quote:

Originally Posted by DARKTHIRTY777

I purchased a set of Hoosier drag radials. I noticed that the rim spun a little bit in the wheel.

out of curiosity, did you check if this occurred on other DR's? i'll have to give this a test and see how much rim spin happens on mine, although i'm not too sure how this will impact my usage of them, it's information.

what wheel are you running yours on?

MosesBarkley · 11-22-2017, 02:36 PM

Quote:

Originally Posted by GR8WHITE1

Where did you get the 18" ZL1 replica wheels?

Yes... Inquiring minds want to know!

TheFlyingBananaSS · 11-22-2017, 06:53 PM

Totally stoked on seeing if I can get a pair of rears from factoryreproductions to match the set I bought from them! I am totally going for traction setup for next summer. If I can keep my chrome too that would be awesomeness.

Mkn95u0 · 11-23-2017, 09:23 PM

Quote:

Originally Posted by MosesBarkley

Yes... Inquiring minds want to know!

Factory reproductions 👍

portermike · 01-19-2018, 06:44 PM

What are the dimension of your wheels
18/9.5/40mm

white1LE · 04-04-2018, 01:02 PM

So no clearance issues with the 325/45-18 Hoosiers?? my car is slightly lower than stock so the 3/4'' on each side of the tire is really cutting it close. Anyone else running these?? Thanks

Mkn95u0 · 05-11-2018, 04:11 PM

Quote:

Originally Posted by portermike

What are the dimension of your wheels
18/9.5/40mm

18x11 +43 rear running drag tires
20x10 +23 front
20x11 +43 rear running street tires

Mkn95u0 · 05-11-2018, 04:13 PM

Quote:

Originally Posted by white1LE

So no clearance issues with the 325/45-18 Hoosiers?? my car is slightly lower than stock so the 3/4'' on each side of the tire is really cutting it close. Anyone else running these?? Thanks

i have no clearance issues, however when i launch hard, it does appear as though they rub slightly on just the edge of the inner wheel well area

11-22-2017, 06:53 PM	#18
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,260	Totally stoked on seeing if I can get a pair of rears from factoryreproductions to match the set I bought from them! I am totally going for traction setup for next summer. If I can keep my chrome too that would be awesomeness. Attached Images __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.

04-04-2018, 01:02 PM	#21
white1LE Drives: 2013 Camaro ZL1 Join Date: Nov 2012 Location: Dubuque, IA Posts: 880	So no clearance issues with the 325/45-18 Hoosiers?? my car is slightly lower than stock so the 3/4'' on each side of the tire is really cutting it close. Anyone else running these?? Thanks __________________ 13 ZL1 A6 LSX 427 with AGP Twin Turbos, E85 and Flex Fuel. Built and tuned by ADM Performance 1000rwhp

01-19-2018, 06:44 PM	#20
portermike Drives: 2010 camaro ss Join Date: Dec 2017 Location: Maxton Nc Posts: 2	What are the dimension of your wheels 18/9.5/40mm