Retrofit Sequential Tails - Page 3

MGD · 07-31-2018, 12:24 PM

One month later and no response. Too bad, that would be a nice setup.

chutoyy · 08-01-2018, 12:36 AM

There's always a full custom setup....

dgriff14 · 08-01-2018, 01:12 AM

Quote:

Originally Posted by chutoyy

There's always a full custom setup....

Are those the ones I saw on Facebook for like $1300 iirc?

chutoyy · 08-01-2018, 01:24 AM

Quote:

Originally Posted by dgriff14

Are those the ones I saw on Facebook for like $1300 iirc?

Not sure about Facebook, but yes, I think he charges $1300 to start... I have the control unit he uses, but I don't know if I have the DIY knowledge to do SMD LEDs on a custom PCB.

MGD · 08-01-2018, 09:49 AM

They sure would not be legal.

Oramac2016 · 08-01-2018, 09:48 PM

Those are nice. Im going with something more simple. Being able to see individual leds irritates me for some reason lol. They would probably look more awesome if they were diffused.And if $1300 is the price thats crazy.

Oramac2016 · 08-01-2018, 09:51 PM

Sorry haven’t updated. Took a vacay with the family and then the car went to the dealership for the engine studder issue.(again)

Sheriff37 · 08-02-2018, 01:34 PM

Quote:

Originally Posted by Oramac2016

Sorry haven’t updated. Took a vacay with the family and then the car went to the dealership for the engine studder issue.(again)

Vacations are important, and so is time spent with the family. Looking forward to that DIY guide!

Soleil · 08-02-2018, 03:09 PM

They look awesome

but what about the normal lights? We have the blinker where you guys have the reverse light.

Oramac2016 · 08-03-2018, 01:16 PM

So one thing. (and anyone is free to chime in)The 12v on the harness that feeds the led board must be low current. When I try to tie the new blinker strip into it, they dont function properly.Im not sure if this is only the case on the led tails. We need 3 things... 12v on with the car, 12v when you turn on headlights/taillights, blinker 12v (on/off). So since i cant pull the 12v from the tail harness the closest thing to me is the license plate light wire which is in the bumper and pretty easy to access.Which usually gets 12v just like when your taillights come on. The blinker wire is easy, thats on taillight harness.

DragRacerX · 10-17-2018, 08:46 PM

Quote:

Originally Posted by Oramac2016

I will share how I did it for all my diy family

Thanks everyone. I’ll be working on them more today.

WHEN & WHERE will you be sharing OR taking orders?

07-31-2018, 12:24 PM	#29
MGD Drives: 16 Camaro SS Join Date: Jul 2012 Location: Menifee Posts: 820	One month later and no response. Too bad, that would be a nice setup. __________________ Interior: Adrenaline Red. SS/2SS, M6, NPP, Sun Roof, 8" Nav. Black 5 Spoke Wheels.

08-01-2018, 09:49 AM	#33
MGD Drives: 16 Camaro SS Join Date: Jul 2012 Location: Menifee Posts: 820	They sure would not be legal. __________________ Interior: Adrenaline Red. SS/2SS, M6, NPP, Sun Roof, 8" Nav. Black 5 Spoke Wheels.

08-01-2018, 09:48 PM	#34
Oramac2016 Drives: 2016 Camaro RS Join Date: May 2016 Location: Louisiana Posts: 392	Those are nice. Im going with something more simple. Being able to see individual leds irritates me for some reason lol. They would probably look more awesome if they were diffused.And if $1300 is the price thats crazy. __________________ 2016 Summit White 1LT RS, Brembo Brakes, NPP Exhaust,Front Glowtie, Rear Red Glowtie, Adrenaline Red Interior

08-01-2018, 09:51 PM	#35
Oramac2016 Drives: 2016 Camaro RS Join Date: May 2016 Location: Louisiana Posts: 392	Sorry haven’t updated. Took a vacay with the family and then the car went to the dealership for the engine studder issue.(again) __________________ 2016 Summit White 1LT RS, Brembo Brakes, NPP Exhaust,Front Glowtie, Rear Red Glowtie, Adrenaline Red Interior

08-02-2018, 03:09 PM	#37
Soleil Drives: Camaro 50th anniversary edition Join Date: May 2017 Location: Europe Posts: 2,203 View My Garage	They look awesome but what about the normal lights? We have the blinker where you guys have the reverse light. __________________ Soleil _____________________________________________ A car is fast enough, if you fear to unlock it in the morning." (Walter Roehrl)

08-03-2018, 01:16 PM	#38
Oramac2016 Drives: 2016 Camaro RS Join Date: May 2016 Location: Louisiana Posts: 392	So one thing. (and anyone is free to chime in)The 12v on the harness that feeds the led board must be low current. When I try to tie the new blinker strip into it, they dont function properly.Im not sure if this is only the case on the led tails. We need 3 things... 12v on with the car, 12v when you turn on headlights/taillights, blinker 12v (on/off). So since i cant pull the 12v from the tail harness the closest thing to me is the license plate light wire which is in the bumper and pretty easy to access.Which usually gets 12v just like when your taillights come on. The blinker wire is easy, thats on taillight harness. __________________ 2016 Summit White 1LT RS, Brembo Brakes, NPP Exhaust,Front Glowtie, Rear Red Glowtie, Adrenaline Red Interior

User Name		Remember Me?
Password