Edelbrock E-Force Supercharger.... - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2010victoryredss_ron · 10-13-2010, 10:27 PM

Pm price for L99.thanks

cammedcamaro · 10-14-2010, 11:30 AM

My car will be on the dyno this afternoon if anyone is interested in watching you can go to hitechmotorsport.com and click on the live video on the left side of the home page. I think it will be about 3:00 MN time. My plugs and o2 sensors were gummed up from an additive in the Sunoco 260 (104 octane) fuel I was mixing with pump gas. dmax86 if your talking about mine...that's what I was told the calculations were for 625RWHP, if that is incorrect I would like to know. I'm hoping after the repairs are made it will run 625RWHP again today. I will attach my dyno sheet on here one of these days.

southerncarparts · 10-14-2010, 11:57 AM

Quote:

Originally Posted by cammedcamaro

My car will be on the dyno this afternoon if anyone is interested in watching you can go to hitechmotorsport.com and click on the live video on the left side of the home page. I think it will be about 3:00 MN time. My plugs and o2 sensors were gummed up from an additive in the Sunoco 260 (104 octane) fuel I was mixing with pump gas. dmax86 if your talking about mine...that's what I was told the calculations were for 625RWHP, if that is incorrect I would like to know. I'm hoping after the repairs are made it will run 625RWHP again today. I will attach my dyno sheet on here one of these days.

I'll be watching, definitely! Thanks for the heads up!

-Matt

cammedcamaro · 10-14-2010, 12:05 PM

Quote:

Originally Posted by southerncarparts

I'll be watching, definitely! Thanks for the heads up!

-Matt

Their going to call me before they dyno it. I will let you know as soon as they call me.

cammedcamaro · 10-14-2010, 08:38 PM

Well it sounds like they ran out of time to get it on the dyno today, they tell me it will be on around 9:00 MN time Friday.

cammedcamaro · 10-15-2010, 09:35 AM

Ok they have my car on the dyno now. It's 9:30 am MN time. Go to hitechmotorsport.com and click on the live dyno video on the left side of the home page, it may take a couple minutes to load.

cammedcamaro · 10-15-2010, 02:11 PM

Well they found out the lid on the Edelbrock Supercharger is cracked and broken around the bolts that hold it down. It sounds like with the 2.75" pulley it built up so much pressure that forced the lid to push up and brake around the bolts. For now Hitech is going to put bigger washers on the bolts holding down the new lid. The lid will be delivered overnight early Saturday morning and should be on the car by noon hopefully running on the dyno again. With the broken cover it was only putting out 405rwhp.

southerncarparts · 10-19-2010, 09:04 AM

Quote:

Originally Posted by cammedcamaro

Well they found out the lid on the Edelbrock Supercharger is cracked and broken around the bolts that hold it down. It sounds like with the 2.75" pulley it built up so much pressure that forced the lid to push up and brake around the bolts. For now Hitech is going to put bigger washers on the bolts holding down the new lid. The lid will be delivered overnight early Saturday morning and should be on the car by noon hopefully running on the dyno again. With the broken cover it was only putting out 405rwhp.

Edelbrock was swift with their replacement of the part, yeah? This is the first I've heard of somebody having to use their Edelbrock warranty for this system, but in the past they've always been very very expedient about that process.
Thanks,
Matt

oakaro68 · 10-25-2010, 11:28 AM

PM for price shipped to 20723 - LS3 M6 and tax please

Ajaxx · 10-29-2010, 10:40 PM

PM price LS3 to 70433

cammedcamaro · 11-02-2010, 10:13 AM

Yes they did respond with overnight delivery. The new cover had to be milled to fit washers on the bolts holding it down. All good now.

TeddyP25 · 11-02-2010, 08:34 PM

Quote:

Originally Posted by cammedcamaro

Yes they did respond with overnight delivery. The new cover had to be milled to fit washers on the bolts holding it down. All good now.

Is that your A/F ratio during dyno?

Blue70SS · 11-02-2010, 10:46 PM

Quote:

Originally Posted by cammedcamaro

Yes they did respond with overnight delivery. The new cover had to be milled to fit washers on the bolts holding it down. All good now.

At that AFR your almost sure to blow the engine anytime. Lean = high power at cost of new engine.

Should be closer to 11.5 on WOT. Maybe this has something to do with the cracked cover?

TeddyP25 · 11-02-2010, 10:51 PM

Quote:

Originally Posted by Blue70SS

At that AFR your almost sure blow the engine.

Should be closer to 11.5 on WOT.

+1

10-13-2010, 10:27 PM	#29
2010victoryredss_ron Born: August 27, 2009 Drives: 10CAMARO SS,12CRUZE RS,07 YAM R6 Join Date: Aug 2009 Location: Waterloo, Ontario, Canada Posts: 866 View My Garage	Pm price for L99.thanks __________________ Victory Red 2SS/RS Vin# A9130145

10-29-2010, 10:40 PM	#38
Ajaxx Cantafordit Drives: 2010 2SS/RS Join Date: Mar 2010 Location: Picayune, MS/Covington, LA Posts: 282 View My Garage	PM price LS3 to 70433 __________________ Down, But Not Out 610.7 RWHP/553.8 RWTQ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Supercharger / Turbocharger Results (INFO) Thread	radz28	Forced Induction - V8	273	08-15-2023 04:44 PM
Edelbrock E Force Supercharger Issue	PJ droopy pants	Forced Induction - V8	27	01-10-2011 08:21 AM
Edelbrock E Force Supercharger with Free Shipping	Jason@Phastek	Forced Induction	7	12-25-2010 09:29 PM
Edelbrock E Force Supercharger Installed and Tuned!	PJ droopy pants	Forced Induction - V8	61	07-16-2010 12:48 PM
Edelbrock E Force Supercharger Installed	GPC1	Forced Induction - V8	15	05-03-2010 09:21 AM

10-14-2010, 11:30 AM	#30
cammedcamaro Drives: Red Jewel SS RS 625 RWHP Join Date: Sep 2009 Location: Hugo, MN Posts: 18	My car will be on the dyno this afternoon if anyone is interested in watching you can go to hitechmotorsport.com and click on the live video on the left side of the home page. I think it will be about 3:00 MN time. My plugs and o2 sensors were gummed up from an additive in the Sunoco 260 (104 octane) fuel I was mixing with pump gas. dmax86 if your talking about mine...that's what I was told the calculations were for 625RWHP, if that is incorrect I would like to know. I'm hoping after the repairs are made it will run 625RWHP again today. I will attach my dyno sheet on here one of these days.

10-14-2010, 08:38 PM	#33
cammedcamaro Drives: Red Jewel SS RS 625 RWHP Join Date: Sep 2009 Location: Hugo, MN Posts: 18	Well it sounds like they ran out of time to get it on the dyno today, they tell me it will be on around 9:00 MN time Friday.

10-15-2010, 09:35 AM	#34
cammedcamaro Drives: Red Jewel SS RS 625 RWHP Join Date: Sep 2009 Location: Hugo, MN Posts: 18	Ok they have my car on the dyno now. It's 9:30 am MN time. Go to hitechmotorsport.com and click on the live dyno video on the left side of the home page, it may take a couple minutes to load.

10-15-2010, 02:11 PM	#35
cammedcamaro Drives: Red Jewel SS RS 625 RWHP Join Date: Sep 2009 Location: Hugo, MN Posts: 18	Well they found out the lid on the Edelbrock Supercharger is cracked and broken around the bolts that hold it down. It sounds like with the 2.75" pulley it built up so much pressure that forced the lid to push up and brake around the bolts. For now Hitech is going to put bigger washers on the bolts holding down the new lid. The lid will be delivered overnight early Saturday morning and should be on the car by noon hopefully running on the dyno again. With the broken cover it was only putting out 405rwhp.

10-25-2010, 11:28 AM	#37
oakaro68 Drives: 2015 Camaro Z/28 Join Date: Aug 2010 Location: San Antonio, TX Posts: 410 View My Garage	PM for price shipped to 20723 - LS3 M6 and tax please