02-14-2011, 07:32 PM | #1 |
Drives: 2011 CGM 2SS/RS A6 Join Date: Mar 2010
Location: Palos Verdes, CA
Posts: 237
|
Vibration/rattle at 1500+rpm and gauges dont work!
hi! im an owner of a brand new 2011 camaro 2SS A6! it was purchased on december 2nd, 2010.
so the car is brand new and i hit 1000 miles TODAY! im just stressed because my car is already having problems :( around 1500+ rpm my car starts making weird noises and its kind of a rattle wit sum vibration in my passenger area or my dash i cant tell.. like even if im accelerating slowly its drivin me nuts.. but it went away today idk y.. but its still a problem, even tho it went away today after i noticed that, i noticed something else! My 4 pack gauges wont turn on when i turn the car on, ALL 4 STAY ON 0! Help please! someone on the other section of the forums said that this is has "TSB" numbers, please help me out :( |
02-14-2011, 09:21 PM | #2 |
Drives: 2011 CGM 2SS/RS A6 Join Date: Mar 2010
Location: Palos Verdes, CA
Posts: 237
|
nvm i thought it went away.. and also it starts at 1900 rpm and continues up EVEN THO IM ACCERLERATING VERY SLOWLY
|
02-15-2011, 12:11 AM | #3 |
Drives: Metalic Silver 2010 Camaro 2SS RS Join Date: Jun 2010
Location: Van Nuys Ca
Posts: 83
|
It's because your accelerating very slowly. Your cars a automatic right. That weird sound is probably the AFM kicking in . AFM is the 4cyl mode the auto SS goes into under light acceleration to save gas. If your easy on the gas petal it will kick in around 25 mph with a slight vibration and a slighty different exhaust tone. It will turn off and the noise will go away if you accelerate a lil faster...
If this happens hit the gas slightly harder and it will go away. You can play with the accelerator at all speeds and you'll notice this happen. Or hit cruise control at 65 mph and you'll notice it as well, not as noticeable as the first method but if u listen carefully you'll hear it. Hope this helps as far as you axuli gauges goes take it back to the dealer. That's why we got a warranty. |
02-16-2011, 06:37 PM | #4 | |
2010 Camaro SS/RS
Drives: 2010 Camaro SS/RS Join Date: Jan 2011
Location: Elk Grove CA
Posts: 155
|
Quote:
Another GM failure.... The AFM which you're not supposed to feel when it changes. They failed miserably on mine... I felt it all the time! Vibration and bogging down sensation! |
|
02-18-2011, 06:35 PM | #5 |
Drives: 2011 CGM 2SS/RS A6 Join Date: Mar 2010
Location: Palos Verdes, CA
Posts: 237
|
its not jsut rattling its a weird crackling* sound! can ttell its from the passenger side or if its coming from the vents/ heater! its irritatinnng!
Last edited by MClarenF1; 02-18-2011 at 09:15 PM. |
02-18-2011, 07:58 PM | #6 |
Drives: 2011 CGM 2SS/RS A6 Join Date: Mar 2010
Location: Palos Verdes, CA
Posts: 237
|
bump
|
02-20-2011, 05:03 PM | #7 |
I feel something similar when im at a constant low RPM speed.. i think this is the AFM kicking in as some of the other posters have stated.
|
|
02-20-2011, 05:17 PM | #8 |
Account Suspended
Drives: 2011 Camaro LS Join Date: Dec 2010
Location: NY
Posts: 1,117
|
You have a warrenty. Just take it to the dealer
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Camaro OBDII Aeroforce Scan Gauges!!! | Meister@Torq | Audio / Visual / Electronics/ Gauges / Nav | 7 | 06-28-2011 11:19 AM |
Additional gauges | LoneCynic | 5th Gen Camaro SS LS LT General Discussions | 5 | 08-05-2010 10:51 AM |