06-15-2012, 02:01 PM | #29 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
06-15-2012, 05:24 PM | #30 |
WICKDSS
Drives: 2011 1SS/RS IOM LS3 Join Date: May 2010
Location: Wichita, Kansas
Posts: 1,111
|
Lmao! I like that.
Ok, here are the measurements on the rear ride height - both sides are at 661.987 mm. The difference is not even measurable on a tape.
__________________
2011 IOM SS/RS, M6. Look up our all generation Camaro club website at Heartland Camaros
Gforce Engineering Drivetrain, ECS 1500 Supercharger, TSP Cam, Alky Controls Meth single nozzle. 91 octane, 698 RWHP 625 rwtq. 4200#+, Tuned by Justin "Justune" Kalwei 11.57 @ 126.8 mph with a crappy 1.80 60'.....still learning to drive....M&H DR's and skinnies on 17" Welds. |
09-08-2012, 08:37 AM | #31 |
Did you get this worked out? I'm having the same problem after doing all the bushings, trailing and toe arms. My car starts going all over the place when i get in boost. Normal driving is fine. I'm trying to find a decent place to do a alignment today
__________________
LS3 M6 w/ Turbonetics stage 1 turbo kit
Huron Speed twin 64's waiting to be installed |
|
09-08-2012, 09:51 AM | #32 |
WICKDSS
Drives: 2011 1SS/RS IOM LS3 Join Date: May 2010
Location: Wichita, Kansas
Posts: 1,111
|
Still have not aligned it, I am still taking things apart in rear to get to other parts. Will be doing alignment again in next few weeks as I while be slapping DR's on. still wiggles under hard acceleration for now.
__________________
2011 IOM SS/RS, M6. Look up our all generation Camaro club website at Heartland Camaros
Gforce Engineering Drivetrain, ECS 1500 Supercharger, TSP Cam, Alky Controls Meth single nozzle. 91 octane, 698 RWHP 625 rwtq. 4200#+, Tuned by Justin "Justune" Kalwei 11.57 @ 126.8 mph with a crappy 1.80 60'.....still learning to drive....M&H DR's and skinnies on 17" Welds. |
09-08-2012, 10:06 AM | #33 |
Drives: His Wife Crazy Join Date: Jan 2008
Location: Silas Deane Auto,CT Name: Rob Anderson
Posts: 1,789
|
Maybe i missed it, but you are still running the OEM subframe bushings with no inserts correct?
|
09-08-2012, 11:09 AM | #34 |
WICKDSS
Drives: 2011 1SS/RS IOM LS3 Join Date: May 2010
Location: Wichita, Kansas
Posts: 1,111
|
Correct, but I run the Hotchkis chassis max undercar brace. Zero wheel hop issues. I may still be getting some movement. Subframe bushings are in the near future though.
__________________
2011 IOM SS/RS, M6. Look up our all generation Camaro club website at Heartland Camaros
Gforce Engineering Drivetrain, ECS 1500 Supercharger, TSP Cam, Alky Controls Meth single nozzle. 91 octane, 698 RWHP 625 rwtq. 4200#+, Tuned by Justin "Justune" Kalwei 11.57 @ 126.8 mph with a crappy 1.80 60'.....still learning to drive....M&H DR's and skinnies on 17" Welds. |
09-08-2012, 11:21 AM | #35 |
Drives: His Wife Crazy Join Date: Jan 2008
Location: Silas Deane Auto,CT Name: Rob Anderson
Posts: 1,789
|
Bushings are what you want, that will likely fix the issue.
I just posted a couple video's of the two types of bushings that we offer. |
09-08-2012, 11:22 AM | #36 |
Drives: His Wife Crazy Join Date: Jan 2008
Location: Silas Deane Auto,CT Name: Rob Anderson
Posts: 1,789
|
EP1200 Rear Cradle Bushing Inserts
EP1201 and EP1201HD Rear Cradle Bushings |
09-08-2012, 11:23 AM | #37 |
CamaroFans.com
|
Corner balancing certainly fixed me up... and I was in the process of getting some Pedders bushings when I sold the car.
http://www.camaro5.com/forums/showthread.php?t=139356 |
|
|
|
|