12-08-2012, 08:39 AM | #1 |
Camaro Trunk Emblem
Does anyone know where I can find the camaro trunk emblem. Not lookingm for the small badge, Looking for the one that goes the length of the trunk. I'll try to post pictures of exactly what i am talking about.
|
|
12-08-2012, 08:44 AM | #2 |
|
Did you try EmblemPros? There's a guy in our club who has that, I'll ask him for you.
__________________
"I'm a man who discovered the wheel, and built the Eiffel Tower out of metal and brawn! That's what kind of man I am." - Ron Burgundy
My build thread |
12-08-2012, 09:02 AM | #3 |
I saw where they had the finder emblems but nothing for the trunk besides the inserts for the earlier models.
|
|
12-08-2012, 09:05 AM | #4 |
|
Just talked to him, he got them from EmblemPros. Send a PM to dragonz28 and tell him what you're looking for, he'll hook you up.
__________________
"I'm a man who discovered the wheel, and built the Eiffel Tower out of metal and brawn! That's what kind of man I am." - Ron Burgundy
My build thread |
12-08-2012, 09:07 AM | #5 |
Who's Laughing Now?
Drives: 2011 Camaro 1SS RS LS3 Summit White Join Date: May 2011
Location: Maryland
Posts: 322
|
Yea most people (including myself) buy the "fender badge" emblem off of ebay and stick that on there. Now there are a lot of different spacing options. Some just center it and put it on. Others space the letters out from each other. 1" 2" or 3" . 3" spacing will basically span from taillight to taillight.
|
12-08-2012, 09:23 AM | #6 |
This is what I was looking for.
|
|
12-08-2012, 09:24 AM | #7 |
12-08-2012, 09:24 AM | #8 | |
Ahh... Gotcha... Didnt think of that.
Quote:
|
||
12-12-2012, 12:18 PM | #9 |
How do you remove the bowtie?
|
|
12-12-2012, 12:41 PM | #10 |
Drives: 2006 F150 Lariat Join Date: May 2010
Location: Florida
Posts: 1,665
|
|
12-12-2012, 05:03 PM | #11 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
easy to do on spacing...There is a post on it...Just get painters tape
|
12-12-2012, 05:51 PM | #12 |
Drives: 2011 RJT Camaro LT2 RS auto shift Join Date: Dec 2011
Location: Washington state
Posts: 1,861
|
For me the fender lettering is to smalll for the trunk lid so this is how I did mine. I got the letters from emblempros.
For the spacing I used 1in painters tape. Placed a strip across the of the lip. that gives 1in spacing at the bottom. Next measured the get the center of the lip. I spaced the tape at 1in intervals. Starting with the m placed the letter alining the right bottom corner. Do the same with the C and A. On the right side of middle place a the right bottom place the A,R and O. This will give you 1 in spacing between letters and 1in from the bottom. You can space them out more if you like to. I got this fro another member here on Camaro5 I got the letters from Emblempros. Here is the web site. http://www.emblempros.com/inc/sdetail/3448/3338
__________________
Caddy
|
12-13-2012, 07:48 AM | #13 |
Camaro CRAZY
|
Here's my emblems from EmblemPros. Onyx around outside and blue inside.
|
12-13-2012, 08:00 AM | #14 |
Get Some
Drives: 2014 ZL1 6Speed Join Date: Mar 2012
Location: The Wood's Edge, NM
Posts: 712
|
|
|
|
|
|