Livernois Motorsports Stage 3 Z06 9.50 @ 148 mph Video - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Chris@Livernois · 02-23-2010, 09:25 AM

It went 9.95 @ 139 mph on motor and a best of 9.44 @ 148 mph on spray.

The car has a stock bottom end, stock suspension (lowered), stock transmission, and stock half-shafts.

9.50@148mph Track Pass

Dyno Sheet

Here's is a video of it idling and on the dyno

Livernois Motorsports Stage 3 Head/Cam 2008 Z06

Mild to Wild Switch

Livernois Motorsports Stage 3 Head/Cam 2008 Z06 Start-up/Idle/Rev

Mods are as follows:

Livernois Motorsports Stage 3 CNC Ported LS7 Cylinder Heads (Customer Core Required)
Livernois Motorsports Stage 3 LS7 Camshaft
Livernois Motorsports Dual Valve Spring Package
(Livernois Motorsports Dual Valve Springs, Titanium Retainers, Valve Spring Locators, Locks, & Valve Seals)
Livernois Motorsports Ported Throttle Body
FAST LSX-R Intake Manifold
FAST Fuel Rail Kit
Hardened Pushrods
Kooks 1 7/8" x 3" Longtube Headers
Kooks 3" X-Pipe (Available in catted or non-catted versions)
RPS Billet Twin Disk Clutch
Wideband 02 Bung
Halltech Killer Bee AAIS Cold Air Intake
ARP Head Bolts
GM MLS Head Gaskets
GM Exhaust Gaskets
GM Balancer Bolt
NGK TR6 Spark Plugs
Synthetic Oil Change w/ Filter
Professional Installation
Livernois Motorsports Dyno Tune

Regards,

Rick LeBlanc
Livernois Motorsports

Morepwr · 02-23-2010, 12:39 PM

I like it!!

a_Username · 02-23-2010, 08:38 PM

Throw some FI on it and see what happens lol. 9.95 is fantastic though!

02-23-2010, 09:25 AM	#1
Chris@Livernois Drives: 2010 Camaro Join Date: Jun 2009 Location: Dearborn Heights, MI Posts: 829	Livernois Motorsports Stage 3 Z06 9.50 @ 148 mph Video It went 9.95 @ 139 mph on motor and a best of 9.44 @ 148 mph on spray. The car has a stock bottom end, stock suspension (lowered), stock transmission, and stock half-shafts. 9.50@148mph Track Pass Dyno Sheet Here's is a video of it idling and on the dyno Livernois Motorsports Stage 3 Head/Cam 2008 Z06 Mild to Wild Switch Livernois Motorsports Stage 3 Head/Cam 2008 Z06 Start-up/Idle/Rev Mods are as follows: Livernois Motorsports Stage 3 CNC Ported LS7 Cylinder Heads (Customer Core Required) Livernois Motorsports Stage 3 LS7 Camshaft Livernois Motorsports Dual Valve Spring Package (Livernois Motorsports Dual Valve Springs, Titanium Retainers, Valve Spring Locators, Locks, & Valve Seals) Livernois Motorsports Ported Throttle Body FAST LSX-R Intake Manifold FAST Fuel Rail Kit Hardened Pushrods Kooks 1 7/8" x 3" Longtube Headers Kooks 3" X-Pipe (Available in catted or non-catted versions) RPS Billet Twin Disk Clutch Wideband 02 Bung Halltech Killer Bee AAIS Cold Air Intake ARP Head Bolts GM MLS Head Gaskets GM Exhaust Gaskets GM Balancer Bolt NGK TR6 Spark Plugs Synthetic Oil Change w/ Filter Professional Installation Livernois Motorsports Dyno Tune Regards, Rick LeBlanc Livernois Motorsports

02-23-2010, 12:39 PM	#2
Morepwr woohoo Drives: Silverado, 70cutlass, 57chevy&more Join Date: Apr 2009 Location: Socal Posts: 558	I like it!! __________________ I am not useless, I can still be used as a bad example!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Livernois Motorsports LS7 Z06 Stage 3 CNC Head/Cam Results - Video	Chris@Livernois	General Automotive + Other Cars Discussion	12	02-19-2010 02:02 PM

02-23-2010, 08:38 PM	#3
a_Username Drives: 2010 2SS Camaro Join Date: Jul 2009 Location: Murfreesboro, TN Posts: 3,890 View My Garage	Throw some FI on it and see what happens lol. 9.95 is fantastic though!