05-08-2012, 08:24 AM | #1 |
Drives: 2010 HTR 600 Camaro SS Join Date: Oct 2010
Location: Wisconsin
Posts: 95
|
cruise inop
I have had a super charger added, some programming done to ls3 - now the cruise does not work.
1st ECM - cruise control inop messages in ECM under cruise control, PTO, Traction Control Data: Cruise control disengage history 1 = Brake Pedal Not Initialized Cruise control disengage history 2 = Distance Sensing Cruise Control Configuration Incorrect ** Relearned CKP Vatiation learn with 1st ECM - road tested cruise still inop ** With 2nd ECM installed in vehicle had same messages as 1st ECM in disengage history. With 2nd ECM had to relarn CKP, Idle, Brake Pedal. 2nd ECM had stored codes for all relearn procedures. After relearn process cleared all codes, road tested - cruise still inop R&R steering wheel bezel to remove cruise switch - disconnected switch, checked signal-good reconnected switch & disconnected at BCM - checked for signal from switch at BCM connector-good Somewhere from BCM to ECM the signal is not present. Could this be a brake switch or a clutch switch? or does it sound more like a programming problem with the ecm? |
05-08-2012, 09:19 AM | #2 |
Master of All Things
Drives: '20 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,292
|
sounds to me that you need to have your car at the shop that did the work, as THEY should make it right.
__________________
|
05-08-2012, 12:29 PM | #3 |
Account Suspended
Drives: Camaro Join Date: Feb 2012
Location: Earth
Posts: 247
|
^^^ THIS
That was easy. |
05-08-2012, 01:03 PM | #4 |
H1 OFCR
Drives: 2013 ZL1 Blue Ray Metallic Join Date: Jun 2011
Location: Shelby Twp., Michigan
Posts: 1,320
|
Hahaha, yeah definitely when it was immediately after the SC was dropped in there
__________________
Corsa
Rotofab BBK ZL1 Hood/Fascia AAC Afterburners/Sidemarkers Havoc Black Chrome 5% Tint/20% Smoked Taillights |
|
|
Thread Tools | |
|
|