05-05-2016, 06:26 PM | #1 |
Drives: 2016 1SS Camaro Join Date: Mar 2016
Location: Virginia
Posts: 19
|
Mightymouse Solutions catch can now available!
So I was recently contacted by David C. at MMS about developing a catch can for the 6th generation Camaro's, and volunteered to car for testing! Now I'll start by saying this; "I am very reserved about who can put their hands on my car." David was very professional, clean, and took fantastic care of my car while it was in his hands (I overlooked the whole process). After he reviewed the the factory setup, he reviewed my plans for the car, and chose the best one of his cans to use. We decided that since I plan on doing bolt ons/ 100 shot in the near future, the MMS Gen4 DRAFT style would be the best choice. We used 3/8" barb fittings and the CTS-V blower bracket (slight mod done to it until the new batch is in). The DRAFT can is the best choice for stock/ mild cars "without any clean side contamination". It splices in between the factory pcv port and intake manifold to catch foul side oil and relieve some crankcase pressure. I was also told "for clean side contamination, boost or major mods the choice would be the PCV can with inlet fitting to match hp level". For more on that, send specs to MMS for best can choice. Enjoy the install pics and feel free to drop any comments!
__________________
2016 Black 1SS - Picked up 3/30/16 - G1Pro intake mani, GPI SS4 cam, Circle D 252mm converter, 1 7/8 headers, built/ tuned by me #3hpTuned
- 10.71 @ 126mph - 1.49 60' stock suspension & 17's |
05-05-2016, 06:28 PM | #2 |
Drives: 2016 1SS Camaro Join Date: Mar 2016
Location: Virginia
Posts: 19
|
More pics (wouldn't all post in one?)
__________________
2016 Black 1SS - Picked up 3/30/16 - G1Pro intake mani, GPI SS4 cam, Circle D 252mm converter, 1 7/8 headers, built/ tuned by me #3hpTuned
- 10.71 @ 126mph - 1.49 60' stock suspension & 17's |
05-05-2016, 06:29 PM | #3 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,830
|
whats the price and where can it be purchased?
|
05-05-2016, 06:29 PM | #4 |
Drives: 2016 1SS Camaro Join Date: Mar 2016
Location: Virginia
Posts: 19
|
And a little eye candy!
__________________
2016 Black 1SS - Picked up 3/30/16 - G1Pro intake mani, GPI SS4 cam, Circle D 252mm converter, 1 7/8 headers, built/ tuned by me #3hpTuned
- 10.71 @ 126mph - 1.49 60' stock suspension & 17's |
05-05-2016, 06:32 PM | #5 |
Drives: 2016 1SS Camaro Join Date: Mar 2016
Location: Virginia
Posts: 19
|
Mightymousesolutions . Com I believe would be the correct website. Not certain on finished price as I was a "beta car", I did receive a discount. Add the draft can, CTS-V blower bracket, and 3/8's barbs to your cart for pricing.
__________________
2016 Black 1SS - Picked up 3/30/16 - G1Pro intake mani, GPI SS4 cam, Circle D 252mm converter, 1 7/8 headers, built/ tuned by me #3hpTuned
- 10.71 @ 126mph - 1.49 60' stock suspension & 17's |
05-05-2016, 08:04 PM | #6 |
マスタング = 遅い
Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015
Location: Florida
Posts: 7,061
|
What is the reason for the breather on it? Wouldn't that turn it into an open system?
|
05-05-2016, 08:35 PM | #7 |
Drives: 2016 1SS Camaro Join Date: Mar 2016
Location: Virginia
Posts: 19
|
Will only vent under certain amounts of positive pressure. Not a 100% open vent. Will usually be under vacuum and not venting at all.
__________________
2016 Black 1SS - Picked up 3/30/16 - G1Pro intake mani, GPI SS4 cam, Circle D 252mm converter, 1 7/8 headers, built/ tuned by me #3hpTuned
- 10.71 @ 126mph - 1.49 60' stock suspension & 17's |
|
|
Post Reply
|
Tags |
catch can, install, pcv |
|
|