Options for dual tips instead of quads.

15dnali6.2 · 07-05-2016, 12:53 AM

I'm looking for exhaust options for a 1ss automatic without npp. The problem I seem to be having is that the car doesn't have quad tips so all I can seem to find are muffler deletes which I do not want. Help me out.

enzia35 · 07-05-2016, 12:55 AM

Borla has some dual tip systems.

15dnali6.2 · 07-05-2016, 01:18 AM

I've seen them but 800$ for two mufflers is outrageous lol

Dubchitts · 07-05-2016, 05:15 AM

I hear you. Axle back systems are a rip off for about 2 ft of pipe, 2 mufflers and tips. I just bought flow master super 10s and reused the oe tips. That's enough to hold me over until I get headers and full exhaust

enzia35 · 07-05-2016, 09:12 AM

Could look at others, like Flowmaster, Magnaflow, etc. I think even Moshimoto is getting into the game.

15dnali6.2 · 07-05-2016, 11:23 AM

I really want mbrp since I have it on my Denali 6.2 and absolutely love the sound but they only offer the quad tips

Hyper16 · 07-05-2016, 02:09 PM

Quote:

Originally Posted by 15dnali6.2

I really want mbrp since I have it on my Denali 6.2 and absolutely love the sound but they only offer the quad tips

I changed the rear facia to accommodate quad tips. Replacement facia cost was approx $175 plus paint.

Before
Name: Img_2286.jpg
Views: 798
Size: 372.2 KB

After - Borla S-Type (non-NPP)
Name: Img_2304.jpg
Views: 867
Size: 354.0 KB

Tips protruded a bit too much. A few days after this photo was taken I had the mufflers adjusted to bring them almost flush with the facia.

The LT1 emblem was a gift. Was trying to find a place to put it when I found that it fit directly below the SS emblem like it was made to go there. Might move it or straighten them both.

15dnali6.2 · 07-05-2016, 09:27 PM

Quote:

Originally Posted by Hyper16

I changed the rear facia to accommodate quad tips. Replacement facia cost was approx $175 plus paint.

Before
Attachment 806007

After - Borla S-Type (non-NPP)
Attachment 806008
Tips protruded a bit too much. A few days after this photo was taken I had the mufflers adjusted to bring them almost flush with the facia.

The LT1 emblem was a gift. Was trying to find a place to put it when I found that it fit directly below the SS emblem like it was made to go there. Might move it or straighten them both.

The car is black so the rear facia is unpainted factory. I actually thought about that but couldn't find anywhere that sold it... Dealer?

Hyper16 · 07-05-2016, 09:41 PM

Quote:

Originally Posted by 15dnali6.2

The car is black so the rear facia is unpainted factory. I actually thought about that but couldn't find anywhere that sold it... Dealer?

I got mine through the dealer but you can also get it from Cultrag.

Mr Pinchy · 07-05-2016, 09:46 PM

Quote:

Originally Posted by 15dnali6.2

I really want mbrp since I have it on my Denali 6.2 and absolutely love the sound but they only offer the quad tips

Can the fascia be trimmed to accomodate quad tips?

Hyper16 · 07-05-2016, 09:56 PM

Quote:

Originally Posted by Mr Pinchy

Can the fascia be trimmed to accomodate quad tips?

I suppose it could. I actually considered trying that at one point. However, I wanted the look of the gloss black facia so I just replaced it..

Mr Pinchy · 07-05-2016, 10:05 PM

Quote:

Originally Posted by Hyper16

I suppose it could. I actually considered trying that at one point. However, I wanted the look of the gloss black facia so I just replaced it..

Yes the gloss black looks much better.

2000form · 07-06-2016, 11:40 AM

I also opted not to get the NPP but it could be installed to use as a manual or electric cut out that would be pretty awesome. I like the look as well.

SpookShow'84 · 07-06-2016, 12:03 PM

Quote:

Originally Posted by Dubchittd

I hear you. Axle back systems are a rip off for about 2 ft of pipe, 2 mufflers and tips. I just bought flow master super 10s and reused the oe tips. That's enough to hold me over until I get headers and full exhaust

Any chance for a sound clip or video? I'd really like to hear how that sounds. Even with NPP I would prefer the car to have more interior volume.

07-05-2016, 12:53 AM	#1
15dnali6.2 Drives: 2016 Camaro SS Join Date: Feb 2016 Location: Ponchatoula Louisiana Posts: 12	Options for dual tips instead of quads. I'm looking for exhaust options for a 1ss automatic without npp. The problem I seem to be having is that the car doesn't have quad tips so all I can seem to find are muffler deletes which I do not want. Help me out.

07-05-2016, 12:55 AM	#2
enzia35 Drives: '16 Garnet Red 1SS Join Date: Mar 2014 Location: College Station, TX Posts: 3,450	Borla has some dual tip systems. __________________ '16 Camaro 1SS '18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata

07-05-2016, 01:18 AM	#3
15dnali6.2 Drives: 2016 Camaro SS Join Date: Feb 2016 Location: Ponchatoula Louisiana Posts: 12	I've seen them but 800$ for two mufflers is outrageous lol __________________ 2016 1SS. A8 magnetic ride, brembos. Bone stock 11.95@118 1.8 60' on factory goodyears.

07-05-2016, 09:12 AM	#5
enzia35 Drives: '16 Garnet Red 1SS Join Date: Mar 2014 Location: College Station, TX Posts: 3,450	Could look at others, like Flowmaster, Magnaflow, etc. I think even Moshimoto is getting into the game. __________________ '16 Camaro 1SS '18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata

07-05-2016, 11:23 AM	#6
15dnali6.2 Drives: 2016 Camaro SS Join Date: Feb 2016 Location: Ponchatoula Louisiana Posts: 12	I really want mbrp since I have it on my Denali 6.2 and absolutely love the sound but they only offer the quad tips __________________ 2016 1SS. A8 magnetic ride, brembos. Bone stock 11.95@118 1.8 60' on factory goodyears.

07-05-2016, 05:15 AM	#4
Dubchitts Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015 Location: Michigan Posts: 845 View My Garage	I hear you. Axle back systems are a rip off for about 2 ft of pipe, 2 mufflers and tips. I just bought flow master super 10s and reused the oe tips. That's enough to hold me over until I get headers and full exhaust

07-06-2016, 11:40 AM	#13
2000form Drives: 2000 pontiac formula Join Date: Dec 2015 Location: palm beach gardens Posts: 105	I also opted not to get the NPP but it could be installed to use as a manual or electric cut out that would be pretty awesome. I like the look as well.

User Name		Remember Me?
Password