LPW DIFF COVER - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

EDsTT · 08-24-2011, 11:53 AM

I would like to know how much strength this gives the stock diff ... being will it hold 800 or 900rwhp with billet caps and a posi mod ???

Synner · 08-24-2011, 12:17 PM

At that power level I'd be going 9" since you'll need axles and driveshaft anyways. I'm still waiting to see the revised cover and ensure they can stop the vent leak issue.

If it were me once you get over 650ish I'd look towards the 9" for sure but that also depends on how you drive/abuse it.

EDsTT · 08-24-2011, 12:26 PM

kinda figured that just dont have the funds for a 9 inch right now ... im at 650 wheel now and i barely beat on the car but its whining already

Synner · 08-24-2011, 12:40 PM

Might want to change the fluid and inspect the gears/posi while you have it open. If it suddenly started to whine thats usually a warning sign but people have had that issue from the stock fluid too. Change the fluid and it goes away for a while and eventually comes back.

08-24-2011, 11:53 AM	#1
EDsTT Drives: turbo Join Date: May 2011 Location: detroit Posts: 38	LPW DIFF COVER I would like to know how much strength this gives the stock diff ... being will it hold 800 or 900rwhp with billet caps and a posi mod ???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Showstopper Premium Underhood Cover Package	crabapple	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	3	05-26-2011 07:58 AM
California Car Cover problems	EM1/SS	Camaro Convertible Forum	5	05-16-2011 08:23 AM
aftermarket car cover	011silver 2SS	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	15	11-03-2010 11:23 PM
Car Cover	domano 68	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	19	05-21-2010 09:51 PM
Putting on car cover alone, possible scratches.	OHIOSS	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	15	07-01-2009 09:40 PM

08-24-2011, 12:17 PM	#2
Synner Drives: cars Join Date: May 2011 Location: Oversneeze Posts: 4,544	At that power level I'd be going 9" since you'll need axles and driveshaft anyways. I'm still waiting to see the revised cover and ensure they can stop the vent leak issue. If it were me once you get over 650ish I'd look towards the 9" for sure but that also depends on how you drive/abuse it.

08-24-2011, 12:26 PM	#3
EDsTT Drives: turbo Join Date: May 2011 Location: detroit Posts: 38	kinda figured that just dont have the funds for a 9 inch right now ... im at 650 wheel now and i barely beat on the car but its whining already

08-24-2011, 12:40 PM	#4
Synner Drives: cars Join Date: May 2011 Location: Oversneeze Posts: 4,544	Might want to change the fluid and inspect the gears/posi while you have it open. If it suddenly started to whine thats usually a warning sign but people have had that issue from the stock fluid too. Change the fluid and it goes away for a while and eventually comes back.