Cleaned up the SS today

[Outlaw77]

Very nice man! I don't know how there is not 1 rock chip on your front bumper but I'm totally jealous!!

[Dznts]

Originally Posted by Outlaw77

Very nice man! I don't know how there is not 1 rock chip on your front bumper but I'm totally jealous!!

Thanks! Clear bras work very well for preventing rock chips

[Goo]

Looks good Dznts! Mine is way too dirty now...

[2SSCAMARO]

Originally Posted by Dznts

yes it is a check valve breather, is that bad? I have no idea about the belt, never paid attention.

Breathers that have check valves to prevent unmetered air from entering the crankcase are fine when you are providing metered makeup air to the clean side (like from the CAI intake tube). On the other hand, breathers that have check valves that restrict air flow out of the breather (like RX used to sell) do not allow the high crankcase pressure that supercharged engines build up when in boosted (WOT) operations. The pressure will find another route to exit the crankcase, usually that will be the main seal. Take the breather off and try to blow through the bottom of the breather. Also I would be very surprised if you are not loosing boost because of a slipping front blower belt.

[Dznts]

Originally Posted by 2SSCAMARO

Breathers that have check valves to prevent unmetered air from entering the crankcase are fine when you are providing metered makeup air to the clean side (like from the CAI intake tube). On the other hand, breathers that have check valves that restrict air flow out of the breather (like RX used to sell) do not allow the high crankcase pressure that supercharged engines build up when in boosted (WOT) operations. The pressure will find another route to exit the crankcase, usually that will be the main seal. Take the breather off and try to blow through the bottom of the breather. Also I would be very surprised if you are not loosing boost because of a slipping front blower belt.

Thanks for the info! I will address the belt issue. As far as the breather, that is good to know. ADM did all of my work, so I just assume it is safe. I will take it off and try to blow thru it.

[Outlaw77]

Originally Posted by Dznts

Thanks! Clear bras work very well for preventing rock chips

Nice! How far up did you have the clear bra go up to? I want to get one installed but I'm debating where up to. I'm thinking just the front bumper. I really don't want to see the end line of the bra in the middle of my hood.

[Dznts]

Originally Posted by Outlaw77

Nice! How far up did you have the clear bra go up to? I want to get one installed but I'm debating where up to. I'm thinking just the front bumper. I really don't want to see the end line of the bra in the middle of my hood.

i did the whole front fascia, headlights, a-pillars, mirrors, behind all the wheels, door cups, gill area, and the gas tank lid. Also i stopped mine around half way on the hood and fenders, it is really barely noticeable. ill try to take some pics when i get time.

[Behic2320]

Love how you had your maggie painted/powder coated if you don't mind me asking did you have that done before install and how hard was that to do????

[Dznts]

Originally Posted by Behic2320

Love how you had your maggie painted/powder coated if you don't mind me asking did you have that done before install and how hard was that to do????

appreciate it! i did have it painted before it was installed.

[Behic2320]

Originally Posted by Dznts

appreciate it! i did have it painted before it was installed.

Dang Looks killer

[Dznts]

Originally Posted by Behic2320

Dang Looks killer

Once again I appreciate the kind words. And your car is just amazing

[29er]

love the stance. congrats, beautyful car!

[Dznts]

Originally Posted by 29er

love the stance. congrats, beautyful car!

Thanks!

[JacekPSUr1]

Niice shots! Love your Camaro man!