Help needed: Part number for 2SS chin air dam - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

1989-ZR-1 · 08-28-2009, 02:30 PM

Hello all well I had my first mishap with #27469. I managed to tear the front air dam. Anyone know the part number for it? Its a 2SS RS. Need to order a new one. Thanks.

SS Mike · 08-28-2009, 04:25 PM

You're referring to the plastic piece under the fron of the car that hangs down and usually gets snagged on parking stops and what not right?

If so the part number is 92234404

1989-ZR-1 · 08-28-2009, 05:49 PM

Yes, Snaggesd it and tore it. It is held on by 6 to 8 black plasic screws. Thanks... Eric

1989-ZR-1 · 08-28-2009, 06:00 PM

Thanks I found it at gmpartsdirect. It's official name is "DEFLECTOR" Price $29.21... I feel better now.

rcphotography · 10-24-2009, 09:07 AM

Can someone please verify that was the right part? There's not a pic and on my 87 IROC that piece was called Lower Valance. I hate to get a deflector and it ends up being for the sunroof. Mine is now hanging on one side from coming out of a crappy driveway. Also- I need the little bolts to put it on with.

THANKS!!

CASTIG 2010SS · 10-24-2009, 10:47 AM

Do you know the size or part # of the plastic screws that hold it on? Mine is still hanging on by a couple but some are missing. Thanks.

rcphotography · 10-25-2009, 02:53 PM

I hope someone sees this- I need to make the order before it falls off!!

Bump!

rcphotography · 10-28-2009, 03:53 PM

BUMP!!

CamaroSkooter · 10-28-2009, 04:19 PM

You should be able to just remove that whole piece and not have any issues.

It's not like the 4th gens where that deflector/valance actually directed air in front of the radiator to help with cooling.

glambert1 · 10-28-2009, 05:13 PM

every car I ever owned that thing was torn off at some point why do they even bother

1989-ZR-1 · 11-19-2009, 04:54 PM

Sorry for the delay on this it is the chin spoiler. Got it and swapped it very easy fix. Don't know the screw part number mine still has the original. Thinking about buying a couple more since i have bumped this new one too!

OldTimer · 11-19-2009, 07:34 PM

Mine got ripped off running over a piece of tire fragment on the freeway. I have not replaced it as it really has no function. I can't see spending any money on replacing that part. It is going to get many hits and need replaced more then once. You can't even tell its missing.

lee · 11-19-2009, 08:55 PM

Quote:

Originally Posted by glambert1

every car I ever owned that thing was torn off at some point

is it really only 30 bucks? is that with the plastic snap things i could of swore one time i paid something redicoulous just for the snap things

08-28-2009, 02:30 PM	#1
1989-ZR-1 Drives: 15 Corvettes, 2003 BMW 540I Join Date: Mar 2009 Location: Scottsdale, AZ Posts: 28	Help needed: Part number for 2SS chin air dam Hello all well I had my first mishap with #27469. I managed to tear the front air dam. Anyone know the part number for it? Its a 2SS RS. Need to order a new one. Thanks. __________________ Ordered IOM 2SS/RS AT on 11/07/2008 from: Calumet, Michigan

08-28-2009, 05:49 PM	#3
1989-ZR-1 Drives: 15 Corvettes, 2003 BMW 540I Join Date: Mar 2009 Location: Scottsdale, AZ Posts: 28	Yes, Snaggesd it and tore it. It is held on by 6 to 8 black plasic screws. Thanks... Eric __________________ Ordered IOM 2SS/RS AT on 11/07/2008 from: Calumet, Michigan

08-28-2009, 06:00 PM	#4
1989-ZR-1 Drives: 15 Corvettes, 2003 BMW 540I Join Date: Mar 2009 Location: Scottsdale, AZ Posts: 28	Thanks I found it at gmpartsdirect. It's official name is "DEFLECTOR" Price $29.21... I feel better now. __________________ Ordered IOM 2SS/RS AT on 11/07/2008 from: Calumet, Michigan

10-24-2009, 09:07 AM	#5
rcphotography Photographer Chick Drives: '10 SS IOM- SOUL SHAKER Join Date: Jan 2009 Location: Middle GA Posts: 168	Can someone please verify that was the right part? There's not a pic and on my 87 IROC that piece was called Lower Valance. I hate to get a deflector and it ends up being for the sunroof. Mine is now hanging on one side from coming out of a crappy driveway. Also- I need the little bolts to put it on with. THANKS!! __________________ ROBIN Visit- NEW WEBSITE!! Robin Cook Photography - Middle GA Photographer with a fresh perspective!

10-24-2009, 10:47 AM	#6
CASTIG 2010SS Drives: 2010 CGM Camaro SS\RS Join Date: Apr 2009 Location: PA Posts: 56	Do you know the size or part # of the plastic screws that hold it on? Mine is still hanging on by a couple but some are missing. Thanks. __________________ 2SS CGM, IO Interior BAD 2SS West Chester, PA

08-28-2009, 04:25 PM	#2
SS Mike Drives: 2010 Camaro SS/RS CGM M6 Join Date: Jun 2009 Location: Orange County, California Posts: 804	You're referring to the plastic piece under the fron of the car that hangs down and usually gets snagged on parking stops and what not right? If so the part number is 92234404 __________________ Vortech V-3 Kit, ARH LT's, Custom Exhaust, Aeromotive A1000 Fuel System, Custom Tune - 582 rwhp 533 rwtq 22" Modulare H2 Wheels, CF Hood, Trunk, Spoiler & Roof by Carbon by Design, Custom Steering Wheel from P-Factor Brembo GT BBK, Alpine INA-900, Alpine Type-R Speakers, Hurst Shifter, APR Splitter, Custom Quad Tip Diffuser CKS C1 Coilovers, Falken 452 Tires, 265/35/22 & 285/35/22, Custom Grille, AAC Halos, and much more to come!!

10-25-2009, 02:53 PM	#7
rcphotography Photographer Chick Drives: '10 SS IOM- SOUL SHAKER Join Date: Jan 2009 Location: Middle GA Posts: 168	I hope someone sees this- I need to make the order before it falls off!! Bump! __________________ ROBIN Visit- NEW WEBSITE!! Robin Cook Photography - Middle GA Photographer with a fresh perspective!

10-28-2009, 03:53 PM	#8
rcphotography Photographer Chick Drives: '10 SS IOM- SOUL SHAKER Join Date: Jan 2009 Location: Middle GA Posts: 168	BUMP!! __________________ ROBIN Visit- NEW WEBSITE!! Robin Cook Photography - Middle GA Photographer with a fresh perspective!

10-28-2009, 04:19 PM	#9
CamaroSkooter Retarded One-Legged Owl Drives: 2010 Black Camaro 2SS Join Date: Oct 2008 Location: San Antonio, TX Posts: 9,745	You should be able to just remove that whole piece and not have any issues. It's not like the 4th gens where that deflector/valance actually directed air in front of the radiator to help with cooling.

10-28-2009, 05:13 PM	#10
glambert1 HOMER Drives: 2010 camaro 2LT RS SIM Join Date: May 2009 Location: New York Posts: 527	every car I ever owned that thing was torn off at some point why do they even bother __________________ ....do it yourself and be proud when you brag about your mods...

11-19-2009, 04:54 PM	#11
1989-ZR-1 Drives: 15 Corvettes, 2003 BMW 540I Join Date: Mar 2009 Location: Scottsdale, AZ Posts: 28	Sorry for the delay on this it is the chin spoiler. Got it and swapped it very easy fix. Don't know the screw part number mine still has the original. Thinking about buying a couple more since i have bumped this new one too! __________________ Ordered IOM 2SS/RS AT on 11/07/2008 from: Calumet, Michigan

11-19-2009, 07:34 PM	#12
OldTimer Drives: 2012 Victory Red ZL1 MG9 Join Date: Mar 2008 Location: Texas Posts: 376	Mine got ripped off running over a piece of tire fragment on the freeway. I have not replaced it as it really has no function. I can't see spending any money on replacing that part. It is going to get many hits and need replaced more then once. You can't even tell its missing.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 05:56 PM
Aftermarket Cold air intake	SSCamaro2010	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	40	10-01-2010 02:32 PM
EXHAUST	Milk 1027	Wiki	2	03-07-2010 09:20 PM
What should I buy Borla, Corsa, or Magnaflow?	Mod007	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	14	06-19-2009 08:09 AM
Dealer Installed Options	firehawk1	5th Gen Camaro SS LS LT General Discussions	5	04-18-2009 07:17 PM