My new custom cold air setup... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Pro Stock John · 05-03-2012, 07:48 PM

I'm pretty hardcore, what do you think?

JLE58 · 05-03-2012, 07:58 PM

Jesus what happen?

1stGM · 05-03-2012, 07:59 PM

More HP and less weight... I like it!!!

v8 · 05-03-2012, 08:00 PM

Is it that hard to install the ADM performance scoop

Pro Stock John · 05-03-2012, 08:02 PM

You know those big truck tire strips that you see on the highway? And once in a while you swerve around one and wonder what would happen if you couldn't avoid say a 5 foot long one?

I borrowed an electric saw and cut the broken bumper part off since it was dragging the ground and I was 4 hours from home by Detroit.

After cutting, and use of about 30 zipties:

The Stig · 05-03-2012, 08:19 PM

Quote:

Originally Posted by JLE58

Jesus what happen?

America's #1 threat:

bears

Li0nel1234 · 05-03-2012, 08:19 PM

What's the dyno results from this mod?

jk....

That sucks... I hate that those truckers just leave their crap all over the highways knowing they're potentially going to hurt someone or in your case, mess up a car... =[ I hope your insurance takes care of you.

cruznls · 05-03-2012, 09:01 PM

Replace it with a ZL-1...
Suppose to be on sale on another thread............

austinjames · 05-03-2012, 09:02 PM

thats a nice free mod. +15hp.

Now if you were on a motorcycle that would be called a dead mod. Not so good. I have nightmares about those things when riding my bike

DandD · 05-03-2012, 09:34 PM

Just get some 200mph tape on that and get back out there...LOL I'm right there with ya austinjames, when I was riding that was a huge fear of mine too.

Pro Stock John · 05-03-2012, 09:48 PM

I haven't ridden a motorcycle since the 90's, I woulda shit my pants if I ran into this tread, it was huge.

Padre · 05-03-2012, 11:34 PM

Not stock anymore. :(

We'll need a new category: bolt-off?

Glad you're OK.

Padre

Pro Stock John · 05-04-2012, 08:14 AM

Just a little grayer I think.

Can't wait to go racing again. I hoped to take advantage of the cool air but it's gone from 55F to 83F and now it's in the mid 60's. Next week is shot but the week after I will try running bone stock again unless the weather is just hopeless.

jeepguy_1980 · 05-04-2012, 08:19 AM

Quote:

Originally Posted by Li0nel1234

What's the dyno results from this mod?

jk....

That sucks... I hate that those truckers just leave their crap all over the highways knowing they're potentially going to hurt someone or in your case, mess up a car... =[ I hope your insurance takes care of you.

They should run in the middle of a 4 lane freeway, with 70mph traffic to grab the remains of their tire. What a-holes. I'm sure their human carcass will do less damage than their tire carcass.

05-03-2012, 07:59 PM	#3
1stGM Drives: IOM 2SS/RS M6 Join Date: Oct 2009 Location: Kenosha, Wisconsin Posts: 240	More HP and less weight... I like it!!! __________________ 2010 2SS..LS3..Procharger..4l80e..DSS 9"

05-03-2012, 08:00 PM	#4
v8 Drives: 19 Z06 Join Date: Nov 2011 Location: Oakville Ont. Posts: 1,427	Is it that hard to install the ADM performance scoop __________________ Gone but not forgotten: 1974 Corvette Stingray 454 1986 Z28 2009 Mustang GT convertible 2012 45th 2SS Vert 2013 ZL1 M6 2014 Zl1 M6 2014 GT500 2016 Challenger Hellcat M6 www.youtube.com/c/garageking

05-03-2012, 08:02 PM	#5
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	You know those big truck tire strips that you see on the highway? And once in a while you swerve around one and wonder what would happen if you couldn't avoid say a 5 foot long one? I borrowed an electric saw and cut the broken bumper part off since it was dragging the ground and I was 4 hours from home by Detroit. After cutting, and use of about 30 zipties: __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

05-03-2012, 08:19 PM	#7
Li0nel1234 What should I name my car Drives: 2010 Camaro 2SS RS IOM Join Date: Jul 2009 Location: San Antonio, TX Posts: 786 View My Garage	What's the dyno results from this mod? jk.... That sucks... I hate that those truckers just leave their crap all over the highways knowing they're potentially going to hurt someone or in your case, mess up a car... =[ I hope your insurance takes care of you. __________________ Performance: ARH 2"/"3 headers + ARH 3" HF catback system, SS brake lines, hawk HP+ pads, motul RBF 600 fluid, K&N CAI (w/custom insulation), plug wires, air scoop, Hurst STS, Pedders Track II suspension, 18x10 wheels, 295/45/18 Nitto NT05s Looks: powder coated iom calipers, LED foglights w/ always on harness, custom painted bowties, window tint, smoke tinted tail lights etc, oem gfx w/ custom outlets, painted taillight bezels, all weather trunk mat

05-03-2012, 09:02 PM	#9
austinjames Account Suspend...Right Drives: Synergy LS & Vulcan 1600cc Join Date: Apr 2011 Location: Lakeland, Florida Posts: 3,547 View My Garage	thats a nice free mod. +15hp. Now if you were on a motorcycle that would be called a dead mod. Not so good. I have nightmares about those things when riding my bike __________________

05-03-2012, 07:48 PM	#1
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	My new custom cold air setup... I'm pretty hardcore, what do you think? __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

05-03-2012, 07:58 PM	#2
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,185	Jesus what happen?

05-03-2012, 09:01 PM	#8
cruznls cruznls Drives: 2010 CAMARO Join Date: Feb 2011 Location: ILLINOIS Posts: 260 View My Garage	Replace it with a ZL-1... Suppose to be on sale on another thread............

05-03-2012, 09:34 PM	#10
DandD Drives: 2010 2SS and 2011 LS Join Date: Aug 2011 Location: Western burbs of the Motor City Posts: 628 View My Garage	Just get some 200mph tape on that and get back out there...LOL I'm right there with ya austinjames, when I was riding that was a huge fear of mine too. __________________ Around here we like baseball, hot dogs, apple pie, and Chevrolet

05-03-2012, 09:48 PM	#11
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	I haven't ridden a motorcycle since the 90's, I woulda shit my pants if I ran into this tread, it was huge. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

05-03-2012, 11:34 PM	#12
Padre Only drives on Sundays Drives: '16 2SS A8 NPP MRC NGray Join Date: Feb 2011 Location: Dalton, GA Posts: 2,500 View My Garage	Not stock anymore. :( We'll need a new category: bolt-off? Glad you're OK. Padre __________________ OLD HOTNESS: The "Heretic": '11 2SS/RS L99 A6 Black/Inferno. Build Journal, Videos D1SC GT9 JBA-LT = 720/680 \| 10.330 @ 133.61, 1.546 sixty... Camaro King at ECS V, Darlington. NEW HOTNESS: '16 2SS A8 NPP MRC. Bone Stock, 1/8th: 8.051 @ 89.44, 1.919

05-04-2012, 08:14 AM	#13
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	Just a little grayer I think. Can't wait to go racing again. I hoped to take advantage of the cool air but it's gone from 55F to 83F and now it's in the mid 60's. Next week is shot but the week after I will try running bone stock again unless the weather is just hopeless. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800