DMH Electric Cutouts Poor customer service...!!!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jadyn_425 · 08-21-2012, 01:31 PM

Ok does anyone have these cut outs or hv had
The pleasure of dealing with the customer service
Reguarding shipping new or warranty parts because
Ive got a set of the E cutouts and they wk great but
The set i have for some readon the motors were loose
To the point where i could hear them while cruising on
Te frwy (very annoying)!!! Any whooo so i called dmh
And spoke to the guy there and he says yeah i got a
Batch of motors i know about it and ill take care of it
And send u some new ones you should get em in a wk
THAT WAS 6 MONTHS AGO!! And counting so does anyone
Know of another place that makes the low profile electric cutouts
Tnks....

Sales@Phastek · 08-21-2012, 02:04 PM

QTP sells some oval shapes for better clearance.

http://www.quicktimeperformance.com/OVAL/index.php

litle88 · 08-21-2012, 04:55 PM

I have the dmh Dual oval low profile cutouts and I sent him mine on July 9th still haven't received it!

01pewterz28 · 08-21-2012, 05:54 PM

I had them on my 01Z28 1st set died, the second set died after 6 months they sent me a replacement I then sold it I did not wanto deal with them anymore.

Dr Jkel · 08-22-2012, 06:42 AM

WOW......I have had them on my car for almost 2 years. The first set burned up rather quickly...about 2 months......I contacted the vendor I purchased them from and who installed them.

A replacement set was sent to me rather quickly and since they were replaced I have not had one single issue with them....

jadyn_425 · 08-22-2012, 07:04 AM

Quote:

Originally Posted by Dr Jkel

WOW......I have had them on my car for almost 2 years. The first set burned up rather quickly...about 2 months......I contacted the vendor I purchased them from and who installed them.

A replacement set was sent to me rather quickly and since they were replaced I have not had one single issue with them....

Yea its like hit n miss Mine still wk but the motors are really loose
And make a lot of noise its annoying as hell..to drive around n listen to dat

jadyn_425 · 08-22-2012, 07:06 AM

Quote:

Originally Posted by 01pewterz28

I had them on my 01Z28 1st set died, the second set died after 6 months they sent me a replacement I then old it I did not wanto deal with them anymore.

I dont blame you one bit

Dr Jkel · 08-22-2012, 07:07 AM

I guess I got a good set cause mine work and don't rattle at all....You may can tighten the screws that hold the motor on to help your situation.

jadyn_425 · 08-22-2012, 07:09 AM

Quote:

Originally Posted by litle88

I have the dmh Dual oval low profile
cutouts and I sent him mine on July 9th still haven't received it!

Yea the last time i spoke with him he said that he got
A bad set of motors and he would take care of the situation
Thats been months now so im gonna check out this other company
That makes them now...

1954 Belair-man · 08-22-2012, 07:29 AM

Quote:

Originally Posted by jadyn_425

Ok does anyone have these cut outs or hv had
The pleasure of dealing with the customer service
Reguarding shipping new or warranty parts because
Ive got a set of the E cutouts and they wk great but
The set i have for some readon the motors were loose
To the point where i could hear them while cruising on
Te frwy (very annoying)!!! Any whooo so i called dmh
And spoke to the guy there and he says yeah i got a
Batch of motors i know about it and ill take care of it
And send u some new ones you should get em in a wk
THAT WAS 6 MONTHS AGO!! And counting so does anyone
Know of another place that makes the low profile electric cutouts
Tnks....

Wow that sucks, i thank you for posting and making us aware of a possible issue with the product and the after the sale customer service. I will now scratch them off my list of cut-outs i'am thinking of buying. As mentioned above i'am thinking about the QTP's. Has anyone had any issues with these?

Cali_Camaro_SS · 08-22-2012, 02:24 PM

I think I have posted twice about them already, I have some of there cutouts and i was trying to get a hold of DMH for about 2 months now and no answer.

jadyn_425 · 08-22-2012, 02:27 PM

Quote:

Originally Posted by Cali_Camaro_SS

I think I have posted twice about them already, I have some of there cutouts and i was trying to get a hold of DMH for about 2 months now and no answer.

Yea join the club.... Ph goes to vm and thats if it isnt
Full half the time.... They prob dnt even reply to vm
Anyways prob just delete em all....

whats wrong with
The ones u have?

jadyn_425 · 08-22-2012, 02:30 PM

Quote:

Originally Posted by 1954 Belair-man

Wow that sucks, i thank you for posting and making us aware of a possible issue with the product and the after the sale customer service. I will now scratch them off my list of cut-outs i'am thinking of buying. As mentioned above i'am thinking about the QTP's. Has anyone had any issues with these?

No prob just wanted everyone to know the experience
Ive had with them so they dnt hv to deal with all dat bs...

Cali_Camaro_SS · 08-25-2012, 01:10 PM

Quote:

whats wrong with
The ones u have?

Well thankfully I got it fixed, the thing was they sent me new ones like 3 months ago and they didnt work out of the box even when I applied power to the motors directly, so they sent me new ones again and when I went to plug them in they didnt work either. didnt think to apply power to them also thinking they keep sending crap but then I had a blown fuse somehow and replaced it and the 2nd pair now work

08-21-2012, 01:31 PM	#1
jadyn_425 Drives: 2010 SS Join Date: Sep 2009 Location: USA Posts: 47	DMH Electric Cutouts Poor customer service...!!!! Ok does anyone have these cut outs or hv had The pleasure of dealing with the customer service Reguarding shipping new or warranty parts because Ive got a set of the E cutouts and they wk great but The set i have for some readon the motors were loose To the point where i could hear them while cruising on Te frwy (very annoying)!!! Any whooo so i called dmh And spoke to the guy there and he says yeah i got a Batch of motors i know about it and ill take care of it And send u some new ones you should get em in a wk THAT WAS 6 MONTHS AGO!! And counting so does anyone Know of another place that makes the low profile electric cutouts Tnks....

08-21-2012, 02:04 PM	#2
Sales@Phastek Drives: 2016 1SS Join Date: Apr 2012 Location: Houston, TX Posts: 3,817	QTP sells some oval shapes for better clearance. http://www.quicktimeperformance.com/OVAL/index.php __________________

08-21-2012, 04:55 PM	#3
litle88 V8 Lounge member #2 Drives: 2001 Ws6 Join Date: Sep 2009 Location: Burbank,IL Posts: 6,373	I have the dmh Dual oval low profile cutouts and I sent him mine on July 9th still haven't received it! __________________ 2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.

08-21-2012, 05:54 PM	#4
01pewterz28 #TeamBeckyD Drives: 2017 HBM 2SS Convertible A8 Join Date: Aug 2008 Location: Apopka, FL Posts: 10,496 View My Garage	I had them on my 01Z28 1st set died, the second set died after 6 months they sent me a replacement I then sold it I did not wanto deal with them anymore. __________________ #TeamBeckyD FIFTY HBM 2SS VERT Last edited by 01pewterz28; 08-23-2012 at 07:13 AM.

08-22-2012, 02:24 PM	#11
Cali_Camaro_SS Drives: 2010 Camaro 1SS (BLACK) Join Date: Jan 2010 Location: Cali Posts: 862	I think I have posted twice about them already, I have some of there cutouts and i was trying to get a hold of DMH for about 2 months now and no answer. __________________ _________________ 1SS: Dnyatech LT Headers \| Dynamaxx CatBack \| Diablo Tune \| Intake \| Pfatds Springs \| Heritage Grill \| Blacked out Bezels \| Black Chevy Sign \| Blacked out Wheels \| Tint \| HIDs w/Error code Eliminator \| Green Dome/Trunk Light \|

08-22-2012, 06:42 AM	#5
Dr Jkel and MR. HYDE Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009 Location: Oxford, Alabama Posts: 4,375	WOW......I have had them on my car for almost 2 years. The first set burned up rather quickly...about 2 months......I contacted the vendor I purchased them from and who installed them. A replacement set was sent to me rather quickly and since they were replaced I have not had one single issue with them....

08-22-2012, 07:07 AM	#8
Dr Jkel and MR. HYDE Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009 Location: Oxford, Alabama Posts: 4,375	I guess I got a good set cause mine work and don't rattle at all....You may can tighten the screws that hold the motor on to help your situation.