06-14-2016, 08:48 PM | #1 |
SoCal HT5
Drives: 2010 Camaro Join Date: Jun 2009
Location: SoCal
Posts: 954
|
2010 ss brembo locking up
I was changing my brake as I normally do but after I removed the old rear pad I ran into issue pushing the two lower pots back in to make room for the new pads the top ones have no issue. The emergency brake is off I've tried to pump the brakes a few times to release pressure and it only affected to two. Any tips on how get my new pads in?
__________________
Mods: Brembo Brakes/ Pedders Street 1/ Cold Air Inductions CAI/ Vmax CNC TB/ ZL1 Fascia
|
06-14-2016, 09:15 PM | #2 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
How are you compressing them?
|
06-14-2016, 09:42 PM | #3 |
SoCal HT5
Drives: 2010 Camaro Join Date: Jun 2009
Location: SoCal
Posts: 954
|
I just took the cap off the master cylinder and pumped the brakes a few times, I moved on to the other ones for now and I've had no problems with them just one rear brake
__________________
Mods: Brembo Brakes/ Pedders Street 1/ Cold Air Inductions CAI/ Vmax CNC TB/ ZL1 Fascia
|
|
|
|
|