08-11-2013, 05:01 PM | #1 |
|
anyone have a built LSX376-B15 from chevy performance?
Does anyone have Chevrolet Performance’s new LSX376-B15, featuring a durable, all forged rotating assembly to handle up to 15 pounds of boost. Chevrolet Performance’s engineers started with the tough LS steel Bowtie standard-deck block, added a forged steel crankshaft, forged rods and forged pistons, then topped off the short-block assembly with high-flow, rectangular-port LSX- LS3 6-bolt aluminum heads for supercharged and turbocharged combinations.
Looking for feed back on this package and what limits it might hit with boost and HP from someone who has it running. |
08-11-2013, 05:05 PM | #2 | |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
Quote:
|
|
08-11-2013, 05:07 PM | #3 |
Drives: 11 Seconds or Faster Join Date: May 2012
Location: Arvada, Colorado
Posts: 2,797
|
Andy at ADM has been using them, I almost got one too, but went for cubes instead.
|
08-11-2013, 07:07 PM | #4 |
Drives: ETMC built 700+hp Twin Turbo LS3 Join Date: Apr 2010
Location: Killeen, TX
Posts: 682
|
Im thinking about running this motor to.
|
08-11-2013, 07:23 PM | #5 |
|
I do have a 427 LSX was a bare block 376 bored out to 427 with LSX heads etc. Had it to the track twice and trying to work out the F'n gremlins
So I am keeping some options open like the B15, but last year when we spoke to folks at GM they don't warranty it for lets say 800-1000 HP so I wanted to see if anyone had one and beat the crap out of it yet. I think C5 has thousands of members so lets say we can get 7700 members to send me one dollar each I will test it for everyone! |
08-12-2013, 01:57 AM | #6 |
Drives: A White Car Join Date: Dec 2012
Location: Canada
Posts: 342
|
I'm also curious as to how this engine stands up, have been considering one for a while, subbed
__________________
"From ABS shudder that came on surprisingly early in the lousy brake pedal's travel to a looser rear end than Kim Kardashian"
|
08-12-2013, 02:31 AM | #7 |
Drives: 2010 Camaro 2SSRS RJT L99 Join Date: Jun 2010
Location: Fort Shaw, Montana
Posts: 1,242
|
I was looking at the same engine and asked pretty much the exact same question several months ago. The general comments were you could get a better motor build for less money. Not sure that's true but most of these guys know ALOT more then I do so I would believe them.
I was wanting a street ride in the 750 rwhp range and was told it would be easier to do with just forging my factory block, again, I like the idea of this long block. I would think with some head work and a good cam and good blower it would be insane!!!
__________________
Fiftydriver
2010 SSRS, RJTC, L99, Maggie 2300 SC, 3.4" pulley, Roto-Fab CAI, Dynatech Supermaxx LT headers, Dynatech High Flow cats, Corsa Cat back exhaust, Dual Elite Engineering catch can, MSD wires and Jannetty custom tune, JRE custom diff w/ posi mod, 3.91 LPE gears, Pfaht trailing arms, Pfaht trailing arm and Diff bushings, drop springs and sport sway bars front and back, Fesler dual guage pillar pod w/ AM Cobalt Boost and A/F guages. More to come!! |
08-12-2013, 09:50 PM | #8 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
We use ,them all the time.. and they come with the correct cam for boost.Unlike the LSX 376 B8
|
08-17-2013, 07:00 PM | #9 |
Drives: 2008 Silverado Join Date: Dec 2010
Location: Canada
Posts: 98
|
|
09-23-2013, 11:05 PM | #10 |
bcguy
Drives: 2011 ss/rs m6 Join Date: Nov 2011
Location: british columbia canada
Posts: 507
|
I agree andy we talked on the phone about this motor,the only bad I have read are grade of pistons,are they good enough to hold up
__________________
Agp 62/66 ,lsx 427. , Callie's ,diamond ,all pro ,American racing ,I'ds130s,102 intake and throttle body,etc .fore triple , Turbo 400 level 5 , b and m pro , dss carbon fiber , dss ford 9 inch with strange pumpkin,3.73 ratio,1400 hp axels,boost and air fuel pillar guages. Weld rts 17x10 and 17x4.5 with m and h drag radials and skinnys
|
09-23-2013, 11:37 PM | #11 |
Drives: 2015 SS Sedan M6 Join Date: Dec 2009
Location: Dallas, TX
Posts: 1,086
|
I have one
|
09-23-2013, 11:50 PM | #12 |
Drives: 2012 CTS-V, 2010 Camaro SS Join Date: Sep 2013
Location: Infront of you
Posts: 281
|
ERL.
__________________
2012 CTS-V: Cosmetic Chute. |
09-24-2013, 03:01 PM | #13 |
Account Suspended
Drives: 2010 zr1 Camaro 2011 vert Join Date: Apr 2013
Location: everywhere
Posts: 1,121
|
Ive had my new crate motor break a crank with less than 3000 miles,ive been told by the manufacture of the crank and rods they are rated at 750 hp,im less than happy.
|
09-24-2013, 03:50 PM | #14 |
Drives: Maggie blown LS3 vette Join Date: Aug 2009
Location: SE TX
Posts: 1,490
|
|
|
|
Thread Tools | |
|
|