You are browsing camaro5 
 |
|
06-05-2023, 01:04 PM
|
#1 |
 Drives: 2010 rs Join Date: Feb 2014
Location: ohio
Posts: 33
|
Wheel choice
Looking to buy some 18" wheels for an 89 iroc that is all stock.
What widths and offsets with bolt up and fit correctly with no spacers or rubbing issues ? Sent from my SM-G988U using Tapatalk |
|
|
|
06-05-2023, 02:25 PM
|
#2 |
  
Drives: 2013 zl1 vert Join Date: Dec 2018
Location: Rochester, New york
Posts: 956
|
Lots of info over on thirdgen.org
__________________
22% lower/ 2.5 upper/ 2” headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 850/ dsx aux kit/ 103mm throttle body/ RPM 5” intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2” lid spacer/ brick mod/BMR toe and trailing arms/ 751hp 757 tq SAE @17.3lb on a loaded dyno.
|
|
|
|
|
06-26-2023, 11:05 AM
|
#3 |
|
Anthony S
Drives: 2011 chevrolet camaro 2ss/rs Join Date: Apr 2021
Location: Chiefland, FL
Posts: 842
|
I ran c5 covette Z06 wheels on my 87 GTA with 2" wheel spacers on the front and rear. I switched to a 4th gen rear end, and dropped the rear spacers since those rear diffs are a bit wider and the stance was perfect. Looked really good too.
__________________
Follow me on instagram @The_bald_eagle_machine
https://www.camaro5.com/forums/showthread.php?t=600181 Mods: Texas Speed 2 inch headers, high flow cats, and X-pipe. Custom mid-pipe, Borla Xr1 mufflers. Torqstorm Supercharger, 3.1" pulley, ZL1 fuel pump. MGW Shifter, Mcleod RST clutch, Tick master cylinder and Tick Billet bushing reinforced slave cylinder. DSS One-piece 3.5" Driveshaft, Metco Driveshaft safety loop, BCRacing Coilovers. BMR Poly Diff bushings, Poly Rear cradle bushings, Sub-frame connectors, Lower control arms, camber arms, and toe links. |
|
|
|
|
06-26-2023, 01:05 PM
|
#4 | |
|
Drives: 2013 zl1 vert Join Date: Dec 2018
Location: Rochester, New york
Posts: 956
|
Quote:
__________________
22% lower/ 2.5 upper/ 2” headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 850/ dsx aux kit/ 103mm throttle body/ RPM 5” intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2” lid spacer/ brick mod/BMR toe and trailing arms/ 751hp 757 tq SAE @17.3lb on a loaded dyno.
|
|
|
|
|
|
|
|
|
 |
|
|
