Colorado members check in here - Page 184 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Prochargedchevyi · 08-01-2010, 03:42 PM

Hey Guys,

New to Colorado. New to the forum. New to the Gen 5. NOT so new to the LS series engine. I've been building Oulaw turbo kits with Jeremy Formato for the LSX for a number of years in Florida.

My wife and I saw a 5th Gen meet at Parry's Pizza in Castle Rock a month ago and I figured that most of you would be members here. We took the plunge and purchased a 10' from Medved a few weeks ago. During the winter months, I'll be fabbing a turbo kit for it as well.

Looking to blow all your doors off soon. j/k

Vince

talon6900 · 08-01-2010, 04:20 PM

Hello all,

At 108 pages, I feel late to the party... My first post was to check my order status, my second is to say hi to the other "high elevation" Camaro lovers.

I have recently ordered my 2nd Camaro from Dellenbach motors in Fort Collins and was fortunate to get an up-close and personal look at the Hennessey RJT that they sold...

My first Camaro (and car) was a 1991 RS V6 5spd and I drove it until my wallet couldn't take it anymore... A lot has changed since then and now that I have a garage, it was time once again...

I ordered a 2011 2SS/RS in Synergy Green with painted Granite Black Metallic (GM Truck color) Stripes, Sunroof, Hurst, GMPP exhaust, and GBM painted OEM GFX... Should arrive sometime in Sept.

My current (and winter) vehicle is an '02 Suburban with several "upgrades"...

Also, I registered on CCOTR a week ago, and nothing happening there...

Looking forward to getting together once my new ride shows up!!

TeddyP25 · 08-01-2010, 04:45 PM

Welcome and hello from Ft.Collins also.

MadMav · 08-01-2010, 04:50 PM

Quote:

Originally Posted by Prochargedchevyi

Hey Guys,

New to Colorado. New to the forum. New to the Gen 5. NOT so new to the LS series engine. I've been building Oulaw turbo kits with Jeremy Formato for the LSX for a number of years in Florida.

My wife and I saw a 5th Gen meet at Parry's Pizza in Castle Rock a month ago and I figured that most of you would be members here. We took the plunge and purchased a 10' from Medved a few weeks ago. During the winter months, I'll be fabbing a turbo kit for it as well.

Looking to blow all your doors off soon. j/k

Vince

Welcome Vince! I like turbos too......

Just wish I had one.

Mav

MadMav · 08-01-2010, 04:50 PM

Quote:

Originally Posted by talon6900

Hello all,

At 108 pages, I feel late to the party... My first post was to check my order status, my second is to say hi to the other "high elevation" Camaro lovers.

I have recently ordered my 2nd Camaro from Dellenbach motors in Fort Collins and was fortunate to get an up-close and personal look at the Hennessey RJT that they sold...

My first Camaro (and car) was a 1991 RS V6 5spd and I drove it until my wallet couldn't take it anymore... A lot has changed since then and now that I have a garage, it was time once again...

I ordered a 2011 2SS/RS in Synergy Green with painted Granite Black Metallic (GM Truck color) Stripes, Sunroof, Hurst, GMPP exhaust, and GBM painted OEM GFX... Should arrive sometime in Sept.

My current (and winter) vehicle is an '02 Suburban with several "upgrades"...

Also, I registered on CCOTR a week ago, and nothing happening there...

Looking forward to getting together once my new ride shows up!!

Welcome......

I like the Green!

Mav

talon6900 · 08-01-2010, 05:03 PM

Quote:

Originally Posted by TeddyP25

Welcome and hello from Ft.Collins also.

Teddy, did you install your e-force on your own?? I will probably add one next spring/summer but I want to get the Edelbrock warranty, and their dealer list shows 0 installers in Northern Colorado...

TeddyP25 · 08-01-2010, 05:07 PM

RMCR did it. They're in Colorado Springs and on this forum. Top notch shop. Also Gm up in Laramie just installed one for Larry, one of the colorado guys.

talon6900 · 08-01-2010, 05:28 PM

Quote:

Originally Posted by TeddyP25

RMCR did it. They're in Colorado Springs and on this forum. Top notch shop. Also Gm up in Laramie just installed one for Larry, one of the colorado guys.

I've read a lot of good things about RMCR, but Laramie is much closer... at least I have plenty of time to figure this out...

And Mav, thanks... Green is the only way to go for me. That way I can always say that I'm "going green" even at 13mpg in the 'Burb.

TeddyP25 · 08-01-2010, 05:29 PM

Let me know if ya ever wanna see it or ride.

talon6900 · 08-01-2010, 05:35 PM

Quote:

Originally Posted by TeddyP25

Let me know if ya ever wanna see it or ride.

I might just do that... as if it isn't torture enough waiting for mine!! 2 weeks at 1100 is killing me, but I'm guessing it has to do with the SGM or the Hurst...

Dexman1349 · 08-01-2010, 06:42 PM

Looking for a powdercoater in the Denver area. Everything on the exterior of the car is yellow (primary) or black (accent), and am doing a full chrome delete. Part of which (and last thing) involves turning the rims/caps/lugs black. I really like the rims already, just want them black.

The car is currently at the paintshop getting stripes done, and part of me thinks that I could just get the rims painted instead. I'm just not sure on the durablilty.

Suggestions?

I am also open to "custom" suggestions to adding yellow accents to the rims in some fashion as well, but I'm not that artistic.

Prochargedchevyi · 08-01-2010, 07:25 PM

Quote:

Originally Posted by Dexman1349

Looking for a powdercoater in the Denver area. Everything on the exterior of the car is yellow (primary) or black (accent), and am doing a full chrome delete. Part of which (and last thing) involves turning the rims/caps/lugs black. I really like the rims already, just want them black.

Roadrunner Fabrication off I25 exit 215 (I think). Their powdercoating division does great work and they've got every shade of black you could imagine. They did all the PC work on our custom motorcycle frames and they've yet to chip or scuff.

Kelly is the owner and he'll treat you right.

Dexman1349 · 08-01-2010, 10:14 PM

What is the usual routine when powdercoating rims? I'm assuming I would be responsible for removing the tires and pressure montiors before I take them in, then have them reinstalled at a tire shop afterwards.

pumpkinrancho · 08-01-2010, 11:21 PM

Quote:

Originally Posted by TeddyP25

RMCR did it. They're in Colorado Springs and on this forum. Top notch shop. Also Gm up in Laramie just installed one for Larry, one of the colorado guys.

Got any idea what Laramie charged him versus what Rmcr charged you? Also this tuesday is the Mcdonalds cruise if your interested. Thanks ANDY

08-01-2010, 04:45 PM	#2565
TeddyP25 Drives: 2SS Join Date: May 2009 Location: Fort Collins Posts: 611	Welcome and hello from Ft.Collins also. __________________ 2SS/RS CGM/BLK GFX MN6418 Stroker.785rwhp/885lbtq.50 SHOT NO2..Pfadt arms,toe links,coilovers,swaybars,end links,engine mounts,dif/sub bushings.MGWshifter.Tick LVL 3.ARH1 7/8 LT's/ARH exhaust.ADM gauges/race CAI.E-FORCE SC.8 rib IW 10%OD.LPE dual pump/module.85lb inj,custom valve covers.RMCR tune.TOOLEY RACING CAM.JRE posi kit.JRE fuel upgrade.RX MONSTER CatchCan.DSS axels/DS.Hammerhead rear, 3:73's. WYOSPEED builthttp://www.camaro5.com/forums/showthread.php?t=115687

08-01-2010, 05:07 PM	#2569
TeddyP25 Drives: 2SS Join Date: May 2009 Location: Fort Collins Posts: 611	RMCR did it. They're in Colorado Springs and on this forum. Top notch shop. Also Gm up in Laramie just installed one for Larry, one of the colorado guys. __________________ 2SS/RS CGM/BLK GFX MN6418 Stroker.785rwhp/885lbtq.50 SHOT NO2..Pfadt arms,toe links,coilovers,swaybars,end links,engine mounts,dif/sub bushings.MGWshifter.Tick LVL 3.ARH1 7/8 LT's/ARH exhaust.ADM gauges/race CAI.E-FORCE SC.8 rib IW 10%OD.LPE dual pump/module.85lb inj,custom valve covers.RMCR tune.TOOLEY RACING CAM.JRE posi kit.JRE fuel upgrade.RX MONSTER CatchCan.DSS axels/DS.Hammerhead rear, 3:73's. WYOSPEED builthttp://www.camaro5.com/forums/showthread.php?t=115687

08-01-2010, 05:29 PM	#2571
TeddyP25 Drives: 2SS Join Date: May 2009 Location: Fort Collins Posts: 611	Let me know if ya ever wanna see it or ride. __________________ 2SS/RS CGM/BLK GFX MN6418 Stroker.785rwhp/885lbtq.50 SHOT NO2..Pfadt arms,toe links,coilovers,swaybars,end links,engine mounts,dif/sub bushings.MGWshifter.Tick LVL 3.ARH1 7/8 LT's/ARH exhaust.ADM gauges/race CAI.E-FORCE SC.8 rib IW 10%OD.LPE dual pump/module.85lb inj,custom valve covers.RMCR tune.TOOLEY RACING CAM.JRE posi kit.JRE fuel upgrade.RX MONSTER CatchCan.DSS axels/DS.Hammerhead rear, 3:73's. WYOSPEED builthttp://www.camaro5.com/forums/showthread.php?t=115687

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Old school members!	4thGenRocks	Off-topic Discussions	14	07-06-2010 04:00 PM
For Sale: 2007 Chev Colorado EXT Cab Z71 4X4	bluch	Autos For Sale / Wanted	7	06-25-2009 02:03 PM
Check out this web site i found	ezlock83	5th Gen Camaro SS LS LT General Discussions	5	03-04-2009 12:44 PM
Voice Your Comments/Suggestions/Input for Focus Group on 2010 Camaro	Mr. Wyndham	5th Gen Camaro SS LS LT General Discussions	236	04-22-2008 12:43 AM
# Of Members	TAG UR IT	Site Related Announcements / Suggestions / Feedback / Questions	25	03-16-2008 11:47 AM

08-01-2010, 03:42 PM	#2563
Prochargedchevyi Drives: 2010 Camaro 2SS/RS Join Date: Aug 2010 Location: Castle Rock, Colorado Posts: 153	Hey Guys, New to Colorado. New to the forum. New to the Gen 5. NOT so new to the LS series engine. I've been building Oulaw turbo kits with Jeremy Formato for the LSX for a number of years in Florida. My wife and I saw a 5th Gen meet at Parry's Pizza in Castle Rock a month ago and I figured that most of you would be members here. We took the plunge and purchased a 10' from Medved a few weeks ago. During the winter months, I'll be fabbing a turbo kit for it as well. Looking to blow all your doors off soon. j/k Vince

08-01-2010, 04:20 PM	#2564
talon6900 GRRREEN Drives: '14 Denali HD & '11 Camaro Join Date: Jul 2010 Location: Fort Collins, CO & Central Nowhere, ND Posts: 135 View My Garage	Hello all, At 108 pages, I feel late to the party... My first post was to check my order status, my second is to say hi to the other "high elevation" Camaro lovers. I have recently ordered my 2nd Camaro from Dellenbach motors in Fort Collins and was fortunate to get an up-close and personal look at the Hennessey RJT that they sold... My first Camaro (and car) was a 1991 RS V6 5spd and I drove it until my wallet couldn't take it anymore... A lot has changed since then and now that I have a garage, it was time once again... I ordered a 2011 2SS/RS in Synergy Green with painted Granite Black Metallic (GM Truck color) Stripes, Sunroof, Hurst, GMPP exhaust, and GBM painted OEM GFX... Should arrive sometime in Sept. My current (and winter) vehicle is an '02 Suburban with several "upgrades"... Also, I registered on CCOTR a week ago, and nothing happening there... Looking forward to getting together once my new ride shows up!!

08-01-2010, 06:42 PM	#2573
Dexman1349 2010 2SS/RS M6 Drives: 2010 2SS/RS M6 Join Date: Jun 2010 Location: Auckland, NZ Posts: 1,482	Looking for a powdercoater in the Denver area. Everything on the exterior of the car is yellow (primary) or black (accent), and am doing a full chrome delete. Part of which (and last thing) involves turning the rims/caps/lugs black. I really like the rims already, just want them black. The car is currently at the paintshop getting stripes done, and part of me thinks that I could just get the rims painted instead. I'm just not sure on the durablilty. Suggestions? I am also open to "custom" suggestions to adding yellow accents to the rims in some fashion as well, but I'm not that artistic.

08-01-2010, 10:14 PM	#2575
Dexman1349 2010 2SS/RS M6 Drives: 2010 2SS/RS M6 Join Date: Jun 2010 Location: Auckland, NZ Posts: 1,482	What is the usual routine when powdercoating rims? I'm assuming I would be responsible for removing the tires and pressure montiors before I take them in, then have them reinstalled at a tire shop afterwards.