Cold air intake or Lowering Springs for a v6 ?? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

alvarom123 · 08-19-2014, 09:14 PM

Ok so I really dont know which one I want more an injen cold air intake that can add about 18hp and 17.9lb tq or should I get lowering springs ?? I really want to get some power out of my car but I also really want some lowering springs I just love the way it looks, I was thinking about 1.5in drop in fornt and 1.4in rear ? Will it fit my car right or are my tires too big(pics below)? Thanks for the feedback let me know what you think I should get and any other suggestions like any good brand for springs or better cai ?

(sorry about the bad pics)($400 limit)

NorCalStorm · 08-31-2014, 01:40 AM

if i were you i would wait to drop the car until you can get some wider wheels on there. on my last car (2007 mustang) i lowered it 1.5 inches before getting wider wheels and although it looked good, it just didn't look right because the tires were so far into the wheel well... just my 2 cents....

Aequitas & Veritas · 08-31-2014, 01:43 AM

Tough call, I did them at the same time. But I think I would drop first then intake later if I had to choose

alvarom123 · 08-31-2014, 09:22 AM

Quote:

Originally Posted by NorCalStorm

if i were you i would wait to drop the car until you can get some wider wheels on there. on my last car (2007 mustang) i lowered it 1.5 inches before getting wider wheels and although it looked good, it just didn't look right because the tires were so far into the wheel well... just my 2 cents....

Thanks for the feedback I'll consider that never really thought of it actually thanks again

Sent from my iPhone using Tapatalk

alvarom123 · 08-31-2014, 09:22 AM

Quote:

Originally Posted by Aequitas & Veritas

Tough call, I did them at the same time. But I think I would drop first then intake later if I had to choose

I was thinking the same thing I still can't make up my mind ! Haha

Sent from my iPhone using Tapatalk

BuntaFujiwara · 08-31-2014, 10:00 AM

Springs. Take advantage of that Florida weather! Where I live it will snow in a month, I'd love to be able to consider putting lowering springs on in September and not worry about my front lip getting destroyed.

alvarom123 · 08-31-2014, 10:03 AM

Quote:

Originally Posted by BuntaFujiwara

Spring. Take advantage of that Florida weather! Where I live it will snow in a month, I'd love to be ablw to consider putting lowering springs on in September and not worry about my front lip getting destroyed.

True I'm thinking of just saving to get them both at the same time almost there can't wait till I do it ! Would u recommend a certain brand for lowering spring I don't know much about them ? Thanks for the feedback

Sent from my iPhone using Tapatalk

CamaroLB · 08-31-2014, 11:32 AM

Quote:

Originally Posted by alvarom123

True I'm thinking of just saving to get them both at the same time almost there can't wait till I do it ! Would u recommend a certain brand for lowering spring I don't know much about them ? Thanks for the feedback

Sent from my iPhone using Tapatalk

Eibach or BMR. I have 1" front and 1.4" rear on my V6.

2010SLVRBULIT · 08-31-2014, 11:36 AM

intake 1rst, cuz you can't really see the wheel gap w/ your set up.

alvarom123 · 08-31-2014, 11:58 AM

Quote:

Originally Posted by CamaroLB

Eibach or BMR. I have 1" front and 1.4" rear on my V6.

Do u have a pic of it so I can see what that looks like ? Thanks I was thinking about BMR

Sent from my iPhone using Tapatalk

CamaroLB · 08-31-2014, 01:32 PM

Quote:

Originally Posted by alvarom123

Do u have a pic of it so I can see what that looks like ? Thanks I was thinking about BMR

Sent from my iPhone using Tapatalk

Check my thread there are lots of pics

alvarom123 · 08-31-2014, 01:33 PM

Quote:

Originally Posted by CamaroLB

Check my thread there are lots of pics

Will do thanks

Sent from my iPhone using Tapatalk

alvarom123 · 08-31-2014, 01:36 PM

Quote:

Originally Posted by CamaroLB

Check my thread there are lots of pics

Your car looks sick bro ! I love the rims by the way good job I think the way you lowered it looks perfect too

Sent from my iPhone using Tapatalk

CamaroLB · 08-31-2014, 03:23 PM

Quote:

Originally Posted by alvarom123

Your car looks sick bro ! I love the rims by the way good job I think the way you lowered it looks perfect too

Sent from my iPhone using Tapatalk

Thanks man, I am flattered. Honestly, I advise you to do the same, the kit keeps the ride drivable with an acceptable clearance

08-19-2014, 09:14 PM	#1
alvarom123 Love My Camaro! Only 16! Drives: 2014 Camaro 2LS Join Date: May 2014 Location: Miami,FL Posts: 79 View My Garage	Cold air intake or Lowering Springs for a v6 ?? Ok so I really dont know which one I want more an injen cold air intake that can add about 18hp and 17.9lb tq or should I get lowering springs ?? I really want to get some power out of my car but I also really want some lowering springs I just love the way it looks, I was thinking about 1.5in drop in fornt and 1.4in rear ? Will it fit my car right or are my tires too big(pics below)? Thanks for the feedback let me know what you think I should get and any other suggestions like any good brand for springs or better cai ? (sorry about the bad pics)($400 limit) Attached Images __________________

08-31-2014, 01:43 AM	#3
Aequitas & Veritas Drives: 2010 Camaro 2LT RS, 2009 GTR Join Date: May 2009 Location: Kansas Posts: 2,559 View My Garage	Tough call, I did them at the same time. But I think I would drop first then intake later if I had to choose __________________ Build thread: http://www.camaro5.com/forums/showthread.php?t=152335 Photos: www.flickr.com/bradbeer GTR Instagram: @NoCrustGTR

08-31-2014, 01:40 AM	#2
NorCalStorm Drives: 2014 2LT/RS Join Date: Nov 2012 Location: Rohnert Park, CA Posts: 342	if i were you i would wait to drop the car until you can get some wider wheels on there. on my last car (2007 mustang) i lowered it 1.5 inches before getting wider wheels and although it looked good, it just didn't look right because the tires were so far into the wheel well... just my 2 cents....

08-31-2014, 10:00 AM	#6
BuntaFujiwara Drives: Camaro SS 1LE Join Date: Jul 2014 Location: Calgary, AB Posts: 8	Springs. Take advantage of that Florida weather! Where I live it will snow in a month, I'd love to be able to consider putting lowering springs on in September and not worry about my front lip getting destroyed.

08-31-2014, 11:36 AM	#9
2010SLVRBULIT Drives: G5(LLT) & C6(LS3) Join Date: Apr 2009 Location: MARS Posts: 7,527 View My Garage	intake 1rst, cuz you can't really see the wheel gap w/ your set up.