08-27-2010, 03:00 PM | #1 |
Drives: 11 2SS/RS E-Force Supercharged Join Date: Apr 2010
Location: Charlotte
Posts: 814
|
My Edelbrock E-Force dyno results
Made it in to get a tune for all my new mods. Car has Edelbrock E-force with stock puley, Kooks headers/cat-back, ADM Cold Air Instake and a KB boost-a-pump. All installs were done by myself. The car ran well with the stock Edelbrock tune but was throwing O2 codes on occasion. i did drive it fairly easy because i knew it would be a little lean with the additional mods.
Nick Williams and Heintz Racing did the tune. He mentioned how nice the E-force was under normal driving. He really liked the responsiveness over a Maggie he had worked on. While tuning on the dyno he added quite a bit of fuel. It was quite lean. Here are the results and I whipped up a video too! Quite pleased with this setup. Its a blast to drive. Even with Nitto 505R's I cant keep traction so my next trip to the dragstrip will be interesting.
__________________
|
08-27-2010, 03:16 PM | #2 |
Drives: Maggie blown LS3 vette Join Date: Aug 2009
Location: SE TX
Posts: 1,490
|
Looks like a fun ride How much boost?
|
08-27-2010, 03:17 PM | #3 |
Drives: 11 2SS/RS E-Force Supercharged Join Date: Apr 2010
Location: Charlotte
Posts: 814
|
__________________
|
08-27-2010, 03:27 PM | #4 |
Go Blue!!!!!
Drives: 2012 Cruze LT Join Date: Mar 2009
Location: Indiana
Posts: 23,290
|
Holy CRAP!!! 532 RWHP with Edelbrock E-force with stock puley, Kooks headers/cat-back, ADM Cold Air Instake and a KB boost-a-pump. Man, that is freaking awesome!!
Nice job. If and when I go supercharger this looks like a great way to go. |
08-27-2010, 03:33 PM | #5 |
Drives: 2SS Join Date: May 2009
Location: Fort Collins
Posts: 611
|
Welcome to the Edelbrock experience....your gonna love it.
__________________
2SS/RS CGM/BLK GFX MN6418 Stroker.785rwhp/885lbtq.50 SHOT NO2..Pfadt arms,toe links,coilovers,swaybars,end links,engine mounts,dif/sub bushings.MGWshifter.Tick LVL 3.ARH1 7/8 LT's/ARH exhaust.ADM gauges/race CAI.E-FORCE SC.8 rib IW 10%OD.LPE dual pump/module.85lb inj,custom valve covers.RMCR tune.TOOLEY RACING CAM.JRE posi kit.JRE fuel upgrade.RX MONSTER CatchCan.DSS axels/DS.Hammerhead rear, 3:73's. WYOSPEED builthttp://www.camaro5.com/forums/showthread.php?t=115687
|
08-27-2010, 06:14 PM | #6 |
Choke on that causality!
Drives: 2010 2SS/RS Join Date: Sep 2009
Location: Minnesota
Posts: 645
|
Yep, and it just gets better the more you drive it.
|
08-27-2010, 06:30 PM | #7 |
Drives: LS3S/C Join Date: Aug 2008
Location: CALI
Posts: 1,344
|
these e force s/c are torque monsters
__________________
MODS whipple 2.9L s/c, ADM race scoop, 600 rwhp 550 wrtq, .
|
08-27-2010, 06:35 PM | #8 |
Drives: 11 2SS/RS E-Force Supercharged Join Date: Apr 2010
Location: Charlotte
Posts: 814
|
I was pretty shocked with the torque numbers. Helps get this fat pig of a car rolling .
__________________
|
08-27-2010, 06:42 PM | #9 |
Drives: the wife crazy talking Camaros Join Date: Aug 2010
Location: Lincoln, NE
Posts: 277
|
Very nice ride and video! I though the stock pulley was 5-6 PSI. Did I confuse “stock” with “standard” pulley? How are the IAT’s?
|
08-27-2010, 07:18 PM | #10 | |
Drives: 11 2SS/RS E-Force Supercharged Join Date: Apr 2010
Location: Charlotte
Posts: 814
|
Quote:
Yeah. Standard pulley. It should be 5-6 but as others have seen it creeps up a little and made it to 8. I dont have the IAT info.
__________________
Last edited by lock; 09-02-2010 at 03:43 PM. |
|
08-27-2010, 07:50 PM | #11 |
|
Awesome video! How hard was it to install the Kooks headers and did you install them at home or do you have a shop and a lift?
Where did you get the KB boost a pump? I might need one too very soon. Also... at the end I think you meant to say "Installs" not "Intalls." LOL! Who can blame you though after making such a good video!!
__________________
2010 1SS RS, LS3, SIM/Black, painted rally stripes, AAC sidemarkers, Sunroof, B.A. sound sys; 20x9.5 & 20x11 SV1-C5's; MGW short shifter; Hotchkis Track Pack; Corsa catback; Kooks 1 7/8"; ADM Street; Magnacharger TVS2300 - 548rwhp/512rwtq
1100- 2/18/09; 3800- 6/15/09 VIN#18308; Delivered 6/29/09!!!!! 2014 CTS-V Sedan, Black/Black, Auto, Recaros, Ultra-view, Red Brembos. Stock |
08-27-2010, 08:06 PM | #12 |
Drives: 2SS Join Date: May 2009
Location: Fort Collins
Posts: 611
|
For sure.....I'm running at 578rwhp/595lbtq
__________________
2SS/RS CGM/BLK GFX MN6418 Stroker.785rwhp/885lbtq.50 SHOT NO2..Pfadt arms,toe links,coilovers,swaybars,end links,engine mounts,dif/sub bushings.MGWshifter.Tick LVL 3.ARH1 7/8 LT's/ARH exhaust.ADM gauges/race CAI.E-FORCE SC.8 rib IW 10%OD.LPE dual pump/module.85lb inj,custom valve covers.RMCR tune.TOOLEY RACING CAM.JRE posi kit.JRE fuel upgrade.RX MONSTER CatchCan.DSS axels/DS.Hammerhead rear, 3:73's. WYOSPEED builthttp://www.camaro5.com/forums/showthread.php?t=115687
|
08-27-2010, 08:27 PM | #13 | |
Drives: 11 2SS/RS E-Force Supercharged Join Date: Apr 2010
Location: Charlotte
Posts: 814
|
Quote:
no cheap place to buy a BAP.. about everyone at the same price. I got it here http://focus.c-f-m.com/ thanks for the compliments on the video.. I spent some time getting it nice.. I noticed the typo after uploading. Ill fix it eventually :P. was hoping no one noticed but this shows people actually watch it!
__________________
|
|
08-27-2010, 08:58 PM | #14 | |
|
Quote:
Like I said, that video was very well put together. I need to learn how to do that.
__________________
2010 1SS RS, LS3, SIM/Black, painted rally stripes, AAC sidemarkers, Sunroof, B.A. sound sys; 20x9.5 & 20x11 SV1-C5's; MGW short shifter; Hotchkis Track Pack; Corsa catback; Kooks 1 7/8"; ADM Street; Magnacharger TVS2300 - 548rwhp/512rwtq
1100- 2/18/09; 3800- 6/15/09 VIN#18308; Delivered 6/29/09!!!!! 2014 CTS-V Sedan, Black/Black, Auto, Recaros, Ultra-view, Red Brembos. Stock |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
V6 Dyno results collection | HannoverFist | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 42 | 02-01-2011 06:01 PM |
Scrming's Airaid and Injen Dyno results... | scrming | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 212 | 06-28-2010 03:28 PM |
Magnuson install at RPM motors dyno results | tlamb2 | Forced Induction - V8 | 8 | 04-06-2010 07:32 PM |
baseline dyno results | blueallie | 5th Gen Camaro SS LS LT General Discussions | 13 | 02-16-2010 02:09 PM |
ADM Downpipes Dyno Test Results!!! | katy@lmspeed | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 27 | 10-06-2009 12:20 PM |