You are browsing camaro5 
 |
|
12-25-2010, 01:24 AM
|
#1 |
|
Sold car...
Drives: 2010 Rally Yellow 2SS/RS #37115 Join Date: Oct 2009
Location: Manalapan, New Jersey
Posts: 2,019
|
Glovebox Light #2
I did my glovebox light following previous thread. Thanx jbsrace1 http://www.camaro5.com/forums/showth...light=glovebox
But I used GM part number 13503058 for the light housing using a Led from AAC. Its the same housing as trunk in the Camaro.  I then soldered on 2 wires for the ground and switch.  Here is light mounted after cutting hole with razor knife.  After following previous thread for wiring switch here is finished product.  
__________________
 Build ThreadECS Novi 1500 Supercharged, LS3 conversion, Small blower cam, Alky Meth injection, 3:45 rear, BMR Suspension parts, 1LE Sways, Billy Boat ZL1 dual mode exhaust. Last edited by Rcfiddy1; 02-08-2014 at 05:58 AM. |
|
|
|
12-25-2010, 02:15 AM
|
#2 |
|
www.Camaro5store.com
|
Now THAT is what I need to do!
|
|
|
|
|
12-25-2010, 05:11 AM
|
#3 |
   
Drives: 2011 2SS/RS (M6) 427 Twin Turbo Join Date: May 2008
Location: NJ
Posts: 1,090
|
Very clean looking install. i like it!
__________________
 2011 Camaro 2SS/RS ERL 427 M6 TT -AGP Twin Turbo 55/57 .83ar | ERL 427ci | Squash Fuel System | Stainless Works Chambered 3" | Mcleod RXT | Factory Hurst Short Throw | Black Forgestar F14s | CTS V 6 Piston Brembo | VIS AMS Carbon Fiber Hood | Anvil Carbon Fiber Spoiler |
|
|
|
|
12-26-2010, 01:06 AM
|
#4 |
|
Paul
Drives: '10 2SS/RS M6 "Marauder" Join Date: Mar 2009
Location: NOR*CAL
Posts: 6,257
 |
Very Cool!! Thanks!
__________________
 |
|
|
|
|
12-28-2010, 05:51 AM
|
#5 |
Drives: Red 2SS/RS M6 Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 6,219
|
Nice work. Thanks for sharing
Lupe |
|
|
|
|
12-29-2010, 07:29 AM
|
#6 |
 
Drives: '11 SIM 2ss/rs LS3 #13363 iom seats Join Date: May 2010
Location: NoDak
Posts: 262
|
well done man! If/when I do this, I will be using your idea!
|
|
|
|
|
12-30-2010, 09:29 AM
|
#7 |
|
Member Club Elite #131
Drives: 2017 50th Anniversary H50 2SS Join Date: May 2009
Location: Far West TEXAS
Posts: 1,729
|
I used an LED light strip with a pressure switch to light my glove box.
__________________
 |
|
|
|
|
02-13-2011, 01:09 AM
|
#8 |
|
Texas Camaros
Drives: 2011 Synergy Green 2SS/RS Join Date: Oct 2010
Location: Venus, Tx
Posts: 1,681
|
Just wondering, did both you guys who did this.. use the same pressure switch as jbsrace1? Or did you use something else?
__________________
 |
|
|
|
|
02-13-2011, 02:06 AM
|
#9 |
|
Sold car...
Drives: 2010 Rally Yellow 2SS/RS #37115 Join Date: Oct 2009
Location: Manalapan, New Jersey
Posts: 2,019
|
Same switch....
__________________
Build ThreadECS Novi 1500 Supercharged, LS3 conversion, Small blower cam, Alky Meth injection, 3:45 rear, BMR Suspension parts, 1LE Sways, Billy Boat ZL1 dual mode exhaust. |
|
|
|
|
02-18-2011, 07:24 PM
|
#10 |
Drives: Camaro LS M6, Fiero, Ford F100 Join Date: May 2010
Location: Ohio
Posts: 638
|
I think I'll do this. Thanks for posting.
|
|
|
|
|
02-18-2011, 07:27 PM
|
#11 |
|
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
Once my light cover comes in the mail I'll be doing this. Shouldn't take more than an hour or two
__________________
 |
|
|
|
|
02-18-2011, 08:12 PM
|
#12 |
|
Camaro and Vettehead
Drives: 2SS/RS IOM L99 69 427/400 Vette Join Date: Aug 2009
Location: 12 miles East of Disneyland - Anaheim Hills
Posts: 547
|
I did the same mod too. Nice addition.
Don O
__________________
Nothing sucks more than that moment during an argument when you realize you're wrong.
 |
|
|
|
|
02-19-2011, 10:57 AM
|
#13 |
Drives: 2010 Camaro SS/RS Join Date: Apr 2009
Location: Warrenton, Or.
Posts: 1,062
|
Glovebox Light #2
Done!
Spent the extra money and ordered the switch connector harness from the dealer.
__________________
Jayhawk500
2010 2SS/RS, Six speed, Rally Yellow w/ Black Painted Stripes, Boston Acoustic Stereo, Polished 20" wheels, Solo Mach X Catback Exhaust, Solo HF Cats, Halltech CAI, Full Dash & Door ABL, ABL Lit Homelink Buttons, HUD Installed, Ride Tunes, Full Electric Passenger Seat, Fbodfather signed, VIN # 4492, PAID OFF!!! 2010 Yellow 2SS/RS with black painted Stripes...$37,000.00; Ride Tones sound system and remote...$ 40.00; Seeing the kids faces (Young and Old) light up and almost wet their pants....Priceless!!! |
|
|
|
|
02-19-2011, 06:01 PM
|
#14 | |
  
|
Quote:
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
|
|
|
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY - ABL using EL wire, and 3/16" tube | camarorick | Camaro DIY & HOW-TO instructions & discussions | 502 | 02-25-2014 01:29 PM |
| Raptor shift light | J-Rod6410 | Tuning / Diagnostics -- engine and transmission | 39 | 04-12-2011 10:59 AM |
| Group Buy!!! LED Headlight and Tail Light HALOS, Only $99 Each!!! | Wes@Flashtech | Exterior Parts & Accessories | 51 | 09-27-2010 08:19 PM |
| black light paint??!?!?!?!? | IcallitROOSTER | Cosmetics and Lighting Modification Discussions | 2 | 09-19-2010 03:25 PM |
| LED Dome Light Panel Installed | jammer174 | Interior Parts & Accessories | 4 | 03-03-2010 06:34 PM |
