10-30-2011, 07:45 AM | #1 |
Drives: z28 Join Date: Oct 2011
Location: cameron
Posts: 5
|
How do I determine how many splines my axles are?
My rear end is making a terrible roaring noise but doesn't do it under load. Anyone know how many slpines are on the axles? Jegs offer axles replacement but there's to diff spline counts 26 and 28.
|
10-30-2011, 07:56 AM | #2 |
|
Pull one out! Simple as that.
Or, check your SPID code for the rear end of your 91 and use that information to order new axles after checking with the dealer to confirm. I am 99% certain that the rear axles in a 91 Z28 with the G92 limited slip rear are 28 spline. Also: That should have the G92 limited slip as it is a Z28 - make sure the additive for the limited slip is in your rear end housing or it will howl and you will hear a clunking noise when backing up as the rear end binds.
__________________
Cars and women are both going to give you problems...but you can pay somebody else to fix your car!
|
10-30-2011, 08:29 AM | #3 |
Drives: z28 Join Date: Oct 2011
Location: cameron
Posts: 5
|
preciate it. I just bought it, was thinkin bout putting a whole nother rear end under it but if I can upgrade it would rather do it that ways. Also you wouldn't happen to know of upgrading the rear brakes would you?
|
10-30-2011, 08:33 AM | #4 |
|
There are lots of upgrades for brakes...yours should have rear disks already. If not, I am curious of what the codes under the center armrest say.
__________________
Cars and women are both going to give you problems...but you can pay somebody else to fix your car!
|
10-30-2011, 09:01 AM | #5 |
Drives: z28 Join Date: Oct 2011
Location: cameron
Posts: 5
|
Yeah ive got disk just changed the rear pads and resurfaced the rotors yesterday. Is there a dual piston out there?
|
11-05-2011, 08:22 PM | #6 |
Don't Mess with the Zohan
Drives: 89 IROC Join Date: Apr 2008
Location: West of Toronto
Posts: 160
|
89 was the year they started to put 28 spline axels in. If your 91 is original rear, it's a 28 spline. Might want to pull and count anyway.
__________________
"Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you."
|
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Driveshaft Shop axles, The real reason they work so well.... | Driveshaftshop | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 52 | 03-11-2014 01:01 PM |
Best Deal on DSS Camaro 2010 - 2011 Axles & Powder Coated | Paschal Performance | Transmission / Driveline | 2 | 07-15-2011 10:31 PM |
Gforce Engineerings 4340 and 300m axles for the 5th Gen Camaro | GFORCE1320 | Transmission / Driveline | 12 | 12-04-2010 08:53 PM |
Best Deal on DSS Camaro 2010 - 2011 Axles | Paschal Performance | Transmission / Driveline | 8 | 09-18-2010 11:23 PM |
Hot Deal For DSS 2010 Camaro Axles | Paschal Performance | Transmission / Driveline | 3 | 03-04-2010 08:36 PM |