10 Camaro ss 6m vs 4.6 mustang - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

430606 · 03-18-2013, 04:25 PM

I have a 2010 Camaro SS 6 speed manual Inferno Orange with borla exhaust and a short throw shifter and a cold air intake do you think I will be able to beat a 4.6 mustang with bolt ons

Posted from Camaro5.com App for Android

Deki · 03-18-2013, 06:13 PM

Yes if it's just basic I/E tune and gears. If he's running a tire, it might be close, but you still a ton more power then he does.

dekan513 · 03-18-2013, 07:28 PM

u should kill it. i raced one with a kb charger and bolton. i was exhaust tune intake. and we were door to door.

bw26ss · 03-18-2013, 07:32 PM

4.6 mustang is pretty vague, since they used that engine from 96 to 2010 in three different configurations, 2v, 3v, and 4v, and 4v supercharged, and 03 to 04 cobra with a pulley would walk you pretty easy, just saying

mr02Z/28 · 03-18-2013, 07:47 PM

depending what "bolt" ons you mean... not sure any "stock" Mustang pre-2005 will be able to beat your 2010 SS, unless it boils down to a bad driver... My 2002 Z28(stock) has no prob beating any so called "stock" Mustangs...

bw26ss · 03-18-2013, 11:33 PM

Quote:

Originally Posted by mr02Z/28

depending what "bolt" ons you mean... not sure any "stock" Mustang pre-2005 will be able to beat your 2010 SS, unless it boils down to a bad driver... My 2002 Z28(stock) has no prob beating any so called "stock" Mustangs...

your 2002 z28 would get raped by a stock 03-04 cobra

08-G35s/6MT · 03-19-2013, 02:18 AM

Full bolt on 4v 4.6 Mach 1 w/gears would give you a run for your money!

Larz29 · 03-19-2013, 10:07 AM

I had a 4.6 mustang with bolt on's, and honestly even when my car was bone stock the mustang wouldn't have a chance. At the tires, even with bolt-on's the 4.6 mustang's at the high end are not even 300whp. Pretty weak car

Deki · 03-19-2013, 06:06 PM

Quote:

Originally Posted by Larz29

I had a 4.6 mustang with bolt on's, and honestly even when my car was bone stock the mustang wouldn't have a chance. At the tires, even with bolt-on's the 4.6 mustang's at the high end are not even 300whp. Pretty weak car

A 3v 4.6 is easily over that with bolt ons.

nele22 · 03-19-2013, 06:46 PM

The "terminator" cobra I.e. 03-04 is very quick. Not sure I would want an even up race with my 12 SS.

Bad70supreme · 03-19-2013, 08:17 PM

I have taken a few Termi's when I was just headers! And as far as bolton 4.6s lets not even go there. I dont even know why these questions get asked some times, a 4.6 stang has no freaking chance unless its much more modded then you!

bw26ss · 03-19-2013, 08:19 PM

obviously the op has gone MIA and won't tell us what the car is

Deki · 03-19-2013, 10:54 PM

Quote:

Originally Posted by Bad70supreme

I have taken a few Termi's when I was just headers! And as far as bolton 4.6s lets not even go there. I dont even know why these questions get asked some times, a 4.6 stang has no freaking chance unless its much more modded then you!

Where the hell did you find a stock Termi? lol

KKreme15 · 03-19-2013, 11:23 PM

My friend has an 08 bullit basically stock except for exhaust and suspension and he's run 13flat in the 1/4

03-18-2013, 04:25 PM	#1
430606 Drives: 2010 camaro ss iom 6m Join Date: Mar 2013 Location: nelson Posts: 64 View My Garage	10 Camaro ss 6m vs 4.6 mustang I have a 2010 Camaro SS 6 speed manual Inferno Orange with borla exhaust and a short throw shifter and a cold air intake do you think I will be able to beat a 4.6 mustang with bolt ons Posted from Camaro5.com App for Android

03-18-2013, 06:13 PM	#2
Deki Drives: 2018 Mustang GT Join Date: Nov 2011 Location: Phoenix, AZ Posts: 1,764 View My Garage	Yes if it's just basic I/E tune and gears. If he's running a tire, it might be close, but you still a ton more power then he does. __________________ 2018 Mustang GT

03-18-2013, 07:28 PM	#3
dekan513 chevy pride Drives: 2ss/rs Join Date: Feb 2012 Location: pikeville ky Posts: 2,141 View My Garage	u should kill it. i raced one with a kb charger and bolton. i was exhaust tune intake. and we were door to door. __________________ check out ky speeds fb page https://www.facebook.com/kyspeed

03-19-2013, 08:17 PM	#11
Bad70supreme Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010 Location: plainfield, IL Posts: 2,706	I have taken a few Termi's when I was just headers! And as far as bolton 4.6s lets not even go there. I dont even know why these questions get asked some times, a 4.6 stang has no freaking chance unless its much more modded then you! __________________ 10.91 at 122 H/C stock block N/A

03-18-2013, 07:32 PM	#4
bw26ss Banned Drives: ss camaro Join Date: Jul 2012 Location: usa Posts: 876	4.6 mustang is pretty vague, since they used that engine from 96 to 2010 in three different configurations, 2v, 3v, and 4v, and 4v supercharged, and 03 to 04 cobra with a pulley would walk you pretty easy, just saying

03-18-2013, 07:47 PM	#5
mr02Z/28 Drives: 2002 Z/28,1968 Chevelle convert. Join Date: Oct 2010 Location: Phila.,PA Posts: 1,141 View My Garage	depending what "bolt" ons you mean... not sure any "stock" Mustang pre-2005 will be able to beat your 2010 SS, unless it boils down to a bad driver... My 2002 Z28(stock) has no prob beating any so called "stock" Mustangs...

03-19-2013, 02:18 AM	#7
08-G35s/6MT Drives: racecars Join Date: Dec 2010 Location: BMN Posts: 1,776	Full bolt on 4v 4.6 Mach 1 w/gears would give you a run for your money!

03-19-2013, 10:07 AM	#8
Larz29 Drives: 2010 camaro ss LS3 cyber grey Join Date: Aug 2010 Location: Madison,wi Posts: 226	I had a 4.6 mustang with bolt on's, and honestly even when my car was bone stock the mustang wouldn't have a chance. At the tires, even with bolt-on's the 4.6 mustang's at the high end are not even 300whp. Pretty weak car

03-19-2013, 06:46 PM	#10
nele22 Drives: 2012 SS Join Date: Mar 2013 Location: Ashland Posts: 95	The "terminator" cobra I.e. 03-04 is very quick. Not sure I would want an even up race with my 12 SS.

03-19-2013, 08:19 PM	#12
bw26ss Banned Drives: ss camaro Join Date: Jul 2012 Location: usa Posts: 876	obviously the op has gone MIA and won't tell us what the car is

03-19-2013, 11:23 PM	#14
KKreme15 Drives: C6 Z06 Join Date: Jan 2010 Location: Dayton, MD Posts: 1,645	My friend has an 08 bullit basically stock except for exhaust and suspension and he's run 13flat in the 1/4