01-26-2016, 06:37 PM | #1 |
Drives: My wife crazy with my C5 usage. Join Date: Apr 2009
Location: DFW
Posts: 6,558
|
CMS Dyno Day!
For those of you that are on the fence about where to get work done, haven't been to the new shop or want to compare your results to other dyno's, this is a great chance to do it all!
Spots will fill up quickly so contact the shop A.S.A.P. To get on the list! They will be taking pictures and video of all the pulls so get signed up. Sent from my iPhone using Tapatalk
__________________
UNDER CONSTRUCTION......again......
|
01-26-2016, 09:35 PM | #2 |
"Cam Only"
|
Good stuff Rick. I was just about to post this on here.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
01-26-2016, 09:52 PM | #3 |
Drives: '13 Black 2SS 1LE Join Date: Jul 2015
Location: Aliso Viejo, CA
Posts: 44
|
Will this just be 3 dyno runs or will there also be tuning involved?
|
01-26-2016, 10:44 PM | #4 | |
Drives: My wife crazy with my C5 usage. Join Date: Apr 2009
Location: DFW
Posts: 6,558
|
Quote:
Pretty sure this is just a fun dyno day event. If you want tuning you'll have to get scheduled with Ryne. Sent from my iPhone using Tapatalk
__________________
UNDER CONSTRUCTION......again......
|
|
01-26-2016, 10:45 PM | #5 |
Drives: My wife crazy with my C5 usage. Join Date: Apr 2009
Location: DFW
Posts: 6,558
|
I'm surprised I beat Nacho or you to it. lol Sent from my iPhone using Tapatalk
__________________
UNDER CONSTRUCTION......again......
|
01-26-2016, 10:58 PM | #6 |
"Cam Only"
|
Lol well hopefully I can get the day off and I'll see you there. Might be hard being that it's Easter weekend..
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
01-26-2016, 11:56 PM | #7 |
Drives: 2015 Camaro 2SS Coupe Join Date: Nov 2015
Location: Laguna Hills
Posts: 111
|
Just signed up! Woohoo!
__________________
2015 2SS Coupe Black/Silver Indy Stripes: CAI intake, ARH shorty headers, Solo High flow cats, SW Retro exhaust, 32mm Eibach rear sway, JDM Anti-Wheel-Hop Kit, Range AFM, VMAX Ported TB.
|
01-27-2016, 10:12 AM | #8 |
Drives: 2014 Camaro Join Date: Apr 2014
Location: Temecula
Posts: 63
|
I know someone interested that wants to get a baseline for his Golf R, is it an all wheel dyno or 2 wheel
|
01-27-2016, 11:37 AM | #9 |
Drives: pleather and Chiclets Join Date: Mar 2012
Location: a line somwhere
Posts: 4,206
|
Wait you done with the upgrades?
__________________
|
01-27-2016, 11:44 AM | #10 |
"Cam Only"
|
It's a two wheel loaded mustang dyno.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
01-27-2016, 12:15 PM | #11 |
Drives: 2013 Camaro 2SS/RS M6 Join Date: Feb 2013
Location: So Cal
Posts: 1,048
|
I may just go for the heck of it, should be able to get that day off
__________________
2013 Black / Black Camaro 2SS/RS M6 w/Magnuson TVS2300, ZL1 Fuelpump / ADM FPCM, NPP Exhaust, Cold Air Inductions CAI w/ Scoop, Elite Engineering Catch Can, VMAX Ported TB, OEM 1LE Front Splitter, AAC Ghosted Side Markers, Dropped on BMR Split Drop Springs Build#24869 |
01-28-2016, 09:10 AM | #12 | |
Drives: My wife crazy with my C5 usage. Join Date: Apr 2009
Location: DFW
Posts: 6,558
|
Quote:
My rods haven't come in yet but the machine shop already started on the cleanup so as soon as the rods get here he can balance everything. Heads are out to WCCH, new ported blower manifold is getting picked up today, new pulley should be here this week or next, line lock has been dropped of, mike is shipping or already shipped my clutch to back to get the new flex plate installed to match up with the LSA crank, new water pump has arrived, etc. Lots of stuff still coming together but there is light at the end of the tunnel. I'll be shooting for 15-18 #'s of boost after it's all said and done so it's taken a while to get everything ironed out.
__________________
UNDER CONSTRUCTION......again......
|
|
01-29-2016, 07:37 PM | #13 |
Drives: 2013 Camaro 1SS & 2015 Camaro SS Join Date: Oct 2013
Location: Fremont, CA
Posts: 223
|
|
01-30-2016, 01:33 AM | #14 |
Drives: My wife crazy with my C5 usage. Join Date: Apr 2009
Location: DFW
Posts: 6,558
|
It's officially sold out!
Sent from my iPhone using Tapatalk
__________________
UNDER CONSTRUCTION......again......
|
|
|