12-03-2014, 09:37 AM | #1 |
2014 ss cai install
I recently purchased a cold air inductions intake . Does anyone have a detailed video in the diy install I would take it toy dealer like I did for my v6 but I really don't want to spend 70$ for a 20 or 30 min install
|
|
12-03-2014, 11:25 AM | #2 |
|
Cold air intakes are super easy. The instructions that come with it will be good enough.
__________________
2016 2SS 6-Speed Manual... Magnetic Ride Control, Dual Mode Exhaust, Sunroof, Adrenaline Red Interior, Mylink W/Navigation
Added Edelbrock E-Force Supercharger, GM 1LE Sway Bars, BMR Upper/Lower Trailing Arms, BMR Upper Control Arms. BMR Front/Rear Chassis Braces, BMR Tunnel Brace. GM Red knee Pads, GM Black Front Splitter, GM SEMA Concept Grille, GM Dark Taillights, GM Ground Effects package... Savini Di Forza BM-14 Gloss Black Wheels 9's front, 10's rear. |
12-03-2014, 01:34 PM | #3 | |
Too much is never enough!
Drives: AGP TT SS [COTW] 4/20/15 Join Date: Feb 2014
Location: Toledo,OH
Posts: 4,149
|
Quote:
Easypeasy.
__________________
AGP TT kit, 54/57 Forged rotating assembly, Custom grind cam... Dual nozzle meth, ID850's, Livernois dual fuel pumps, ECS BAP, 25% UDP, 3 inch Magnaflow catback with X pipe, Mantic 9000 clutch, DSS 1000hp axles, DSS aluminum driveshaft, ZL1 rear end, solid subframe bushings, HE differential offset bushings, BMR Trailing arm, BMR toe rods, Lingenfelter LNC-2000,SJM Line Lock. 747 whp 714wtq
Build thread http://www.camaro5.com/forums/showth...55#post8107855 |
|
12-04-2014, 04:28 PM | #4 |
Drives: 2017 ZL1 M6 Join Date: Sep 2014
Location: United States
Posts: 31
|
Easy CAI install
Did mine in about 30 minutes , ( 2015 ) , and it could not have been easier. CAI intake instructions are very clear and you should have no issues , even with the most basic of knowledge or abilities. Give it a shot , you'll be surprised how quick and painless it will be !
|
12-05-2014, 04:58 PM | #5 |
Drives: Waiting on my Hyper '16 Join Date: Jul 2011
Location: Kansas City Mo.
Posts: 241
|
so you left the washer fluid bottle there?
__________________
1978z28 Original paint 355 solid roller 4 speed
2016 Hyper Blue 1LT RS package with all the goodies Sold 6/20 12/10/21 bought a Silver Ice 2SS 6 speed with 40k |
12-06-2014, 04:37 PM | #6 |
Drives: 2017 ZL1 M6 Join Date: Sep 2014
Location: United States
Posts: 31
|
Yup.. in San Diego , rainy day driving isn't all that common!
|
12-08-2014, 10:18 AM | #7 | |
Drives: 2010 SS/RS Supercharged 427 Build Join Date: Nov 2010
Location: Michigan
Posts: 5,504
|
OP - There is a install video on our YouTube Channel that shows install on a V6 I believe, the video was done by a customer a few years back. The CAI will come from us with detailed instructions and color photos. Taking your time, the whole process will probably only take about 30 minutes, it is very straight forward. If you have any specific questions feel free to contact us directly and we would be more than happy to help you in any way that we can
Quote:
|
|
12-08-2014, 10:22 AM | #8 |
Drives: Evil Eva, 2010 2SS LS3 Join Date: Aug 2013
Location: Falls Church, Virginia
Posts: 3,600
|
that is how the CAI model works. You will need to purchase a Washer Tank relocate kit to change that. Most of these kits relocate the WW tank to a different position, and a hose going from the tank to the upper part of the CAI, still on the inside. I chose to go a different rout, and drilled a hole throught he side of my CAI, and mounted the fill cap on the outside of my CAI.
__________________
"You simply cannot trust quotes found on the internet." -Abraham Lincoln
|
12-08-2014, 10:58 AM | #9 | |
Bob
|
I watched this one before installing mine
__________________
Bob
2012 Victory Red 2SS Synergy Edition M6 |
|
12-09-2014, 10:21 AM | #10 |
Drives: 2014 2SS 1LE,RS,NPP,Recaros in SW Join Date: Apr 2012
Location: Sacramento
Posts: 401
|
the Lid comes on and off the CAI. Adds about 30 seconds to a washer bottle refill. No Worries!
|
|
|
|
|