Michigan Custom Tune - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

irproper · 02-28-2014, 01:09 PM

As the title states, im located in GR Michigan, and want to get a custom Tune for basic bolt ons (CAI and Exhaust). Whats the best route?

TOYMARO · 02-28-2014, 01:28 PM

Livernois is up there isnt it?

Spartan01 · 02-28-2014, 01:28 PM

Either find a local speed shop, or order a tune from a reputable dealer.

If you order a tune from a dealer, you will also need to get a tuner to upload it into your car.
Ted Jannetty of Jannetty Racing enterprises is phenomenal.
With this method, you can return the car to stock for warranty work or when you sell it.

There are also some tuners that can take your ECM, tune it, and return it to you. I know Nick Frost out of Richmond VA does this.

Andy@Livernois · 02-28-2014, 06:26 PM

Quote:

Originally Posted by irproper

As the title states, im located in GR Michigan, and want to get a custom Tune for basic bolt ons (CAI and Exhaust). Whats the best route?

While we aren't just down the street from you, we definitely can help you out. Feel free to check out our website and youtube channel for just a sampling of some of the capabilities we have.

SWAT · 02-28-2014, 11:46 PM

Quote:

Originally Posted by irproper

As the title states, im located in GR Michigan, and want to get a custom Tune for basic bolt ons (CAI and Exhaust). Whats the best route?

BTW....also in GR. Welcome to C5!

csmith4153 · 03-01-2014, 07:49 AM

Baker Engineering in Nunica is close to you.

Jannetty Racing can do a remote tune.

Del's12SS · 03-02-2014, 11:33 AM

Call ZZP they are doing some LS work as we'll these days.

2SScamaro2010 · 03-02-2014, 02:15 PM

The two I was concidering was either vector (Detroit aera) or baker engineering. If anyone has used either of them post up your experience with them. Thanks

elarson5757 · 03-04-2014, 10:35 PM

As a Livernois customer I can't recommend enough to call Andy, setup an appointment and let them dyno tune it. It would be a great ride on a nice day and your return trip would be even better.

Livernois all the way....

2SScamaro2010 · 03-08-2014, 03:00 PM

Talked to livernois at the Detroit autorama, pretty sure I'm going to end up going with them. They are also quite a bit closer to me which is good.

Jklo24 · 06-18-2014, 09:01 PM

i used barker and if u go that rout talk to tj there

Bowtie-Bri · 06-18-2014, 09:18 PM

Custom Horsepower. His name is Ty Mason and does all corvette work and dyno services. He is in Caledonia just east of M-37(beltline) and 68th street. Its the only one I know of in GR area with a chassis dyno.

Give him a call.
616-498-6608 (he may answer the pone as south kent mini storage.)

02-28-2014, 01:09 PM	#1
irproper Drives: 2010 Camaro SS Join Date: Feb 2014 Location: United States Posts: 32 View My Garage	Michigan Custom Tune As the title states, im located in GR Michigan, and want to get a custom Tune for basic bolt ons (CAI and Exhaust). Whats the best route?

02-28-2014, 01:28 PM	#3
Spartan01 Drives: Evil Eva, 2010 2SS LS3 Join Date: Aug 2013 Location: Falls Church, Virginia Posts: 3,600	Either find a local speed shop, or order a tune from a reputable dealer. If you order a tune from a dealer, you will also need to get a tuner to upload it into your car. Ted Jannetty of Jannetty Racing enterprises is phenomenal. With this method, you can return the car to stock for warranty work or when you sell it. There are also some tuners that can take your ECM, tune it, and return it to you. I know Nick Frost out of Richmond VA does this. __________________ "You simply cannot trust quotes found on the internet." -Abraham Lincoln

03-01-2014, 07:49 AM	#6
csmith4153 Drives: 2011 1SS Join Date: Jun 2011 Location: Michigan Posts: 421 View My Garage	Baker Engineering in Nunica is close to you. Jannetty Racing can do a remote tune. __________________ 2011 Camaro SS 1999 Camaro SS 1969 Camaro http://www.fquick.com/csmith4153 https://www.youtube.com/channel/UCKH...lQFJSUtgrNEY7w

03-02-2014, 11:33 AM	#7
Del's12SS Drives: 2012 Camaro SS/RS Convertible Join Date: Feb 2013 Location: Wyoming, MI Posts: 566 View My Garage	Call ZZP they are doing some LS work as we'll these days. __________________

03-02-2014, 02:15 PM	#8
2SScamaro2010 Drives: 2010 2SS M6 Join Date: Nov 2012 Location: SE Michigan Posts: 266	The two I was concidering was either vector (Detroit aera) or baker engineering. If anyone has used either of them post up your experience with them. Thanks __________________ Mods: SW Retro Chambered cat back, CAI cai black, APEX scoop and ww tank, RX catch can, APEX Skip-shift Eliminator, Hurst short throw, Speeddawg knob, Kooks 1 7/8 headers high flow cats, BMR trailing arms and toe rods, Livernois dyno tune, ZL1 grill and side skirts.WHP: 415 WTQ: 407

02-28-2014, 01:28 PM	#2
TOYMARO Drives: 2011 Camaro SS/RS 2SS Join Date: Oct 2013 Location: here Posts: 591	Livernois is up there isnt it?

03-04-2014, 10:35 PM	#9
elarson5757 Obsessed and Loving It... Drives: 2013 1LE-SS Join Date: Jun 2013 Location: Saginaw, MI Posts: 524	As a Livernois customer I can't recommend enough to call Andy, setup an appointment and let them dyno tune it. It would be a great ride on a nice day and your return trip would be even better. Livernois all the way....

03-08-2014, 03:00 PM	#10
2SScamaro2010 Drives: 2010 2SS M6 Join Date: Nov 2012 Location: SE Michigan Posts: 266	Talked to livernois at the Detroit autorama, pretty sure I'm going to end up going with them. They are also quite a bit closer to me which is good. __________________ Mods: SW Retro Chambered cat back, CAI cai black, APEX scoop and ww tank, RX catch can, APEX Skip-shift Eliminator, Hurst short throw, Speeddawg knob, Kooks 1 7/8 headers high flow cats, BMR trailing arms and toe rods, Livernois dyno tune, ZL1 grill and side skirts.WHP: 415 WTQ: 407

06-18-2014, 09:01 PM	#11
Jklo24 Drives: Camaro 2018 zl1 hyper blue Join Date: Oct 2012 Location: Michigan Posts: 15	i used barker and if u go that rout talk to tj there

06-18-2014, 09:18 PM	#12
Bowtie-Bri Drives: 2013 Camaro 2SS RS Convt. Join Date: Mar 2011 Location: West MI (Home of the Tulips) Posts: 961 View My Garage	Custom Horsepower. His name is Ty Mason and does all corvette work and dyno services. He is in Caledonia just east of M-37(beltline) and 68th street. Its the only one I know of in GR area with a chassis dyno. Give him a call. 616-498-6608 (he may answer the pone as south kent mini storage.) __________________ 2013 Nickey Stage II Camaro SS Convertible #10.Black w/ Red leather interior. No Weeds Elec. Diverters, CNC ported heads, custom grind cam, upgraded fuel injectors, ZL-1 fuel pump, V-Max ported TB, Red Magnuson Super Charger with rear cog drive, upgraded rear axles good for 1400Hp, 3:45 gears, Tremec 6 spd., Pedders adj. coil overs, Phadt ZL-spec swaybars, 800Hp at the crank, 670RWHP, 613ft.lbs. torq. @ 11lbs. boost. SOLD!!!