05-10-2015, 03:12 AM | #1 |
Drives: 2010 Camaro SS2 Red with white stri Join Date: Apr 2015
Location: Ohio
Posts: 28
|
Elite catch can Question. Need help L99. Daily driver
Alright I am really tired and installed an Elite catch can on my 2010 camaro SS. I have the automatic making it an L99. Well I saw the instructions and I am a little confused and just wanted to double check that I did it right. The hose from the back of the drivers side engine should go to the top (inlet) of the Catch can correct? Thus the hose on the side of the can (outlet) goes to the port under the throttle body? I only am concerned because this is my daily driver and that Elite is closed on the weekend. Also note like I said above I do not have an LS3 so my hoses both don't go under the throttle body. I don't need a link to the Elite website instructions either. Sorry its just late and I would like a verify from the community.
|
05-10-2015, 10:53 AM | #2 |
Drives: 2010 Camaro SS2 Red with white stri Join Date: Apr 2015
Location: Ohio
Posts: 28
|
Bump
|
05-10-2015, 06:48 PM | #3 |
Drives: 2010 1SS/RS Imperial Blue Metallic Join Date: Sep 2010
Location: Huntington West Va
Posts: 443
|
You are correct.
|
05-11-2015, 01:12 PM | #4 |
Account Suspended
Drives: 2015 LFX Auto Join Date: Apr 2015
Location: US of A
Posts: 280
|
The vacuum port is behind the throttle body in the neck of the intake manifold, not under it. It protrudes toward the passenger side. All else is correct.
|
05-11-2015, 01:34 PM | #5 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
Sounds like your routing is all good!
Best regards, Tyler 888-308-6007 |
|
|
Tags |
assistance, catch can, community, elite, question |
|
|