Headers and Catback, Trailer hitch. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

moonlight5 · 09-07-2011, 09:19 AM

I unfortunately had to trade in my car, a 2010 SS Camaro, for something with more room in the back. But, before I did I took out the headers and catback. They are available through this forum and local pick only.

* Kooks headers 1&7/8" to 3", jet coated silver with kooks catted connections 3" to 2&1/2". I have the O2 harness extenders and O2 buds on the cats to pull the rear O2 sensors out of the exhaust streams. It worked incredibly well for me. I never tuned and CELs were not a problem. It's 950 bucks for this setup. SOLD

* Kooks Street Sleeper 2.5 catback exhaust. This system is meant for the V6 and sounds phenomenal on the LS1. I imagine it would sound equally as well on the V6 powertrain. It's 600 bucks. AVAILABLE....make me an offer.

* I also have a Curt trailer hitch. It actually looks very nice on the Camaro as it is very stealthy. It sits quite low and did drag on the ground a bit when going down the driveway. I have the wiring harness for that too. It will need four bolts that you can get at the hardware store. It's 40 bucks.

I can do a package deal on the exhaust, just PM me. Also I have the boxes and receipts for everything. Hit me up!!!

kenkartasasmita · 09-12-2011, 02:49 AM

can i see the picts? i cud pick up to houston.

moonlight5 · 09-12-2011, 09:20 AM

I'll post some pics today.

moonlight5 · 09-12-2011, 04:33 PM

Here are some pics. I can meet you half way since your coming from Austin...

Snake Slayer · 09-13-2011, 10:29 AM

Quote:

Originally Posted by moonlight5

I unfortunately had to trade in my car, a 2010 SS Camaro, for something with more room in the back. But, before I did I took out the headers and catback. They are available through this forum and local pick only.

* Kooks headers 1&7/8" to 3", jet coated silver with kooks catted connections 3" to 2&1/2". I have the O2 harness extenders and O2 buds on the cats to pull the rear O2 sensors out of the exhaust streams. It worked incredibly well for me. I never tuned and CELs were not a problem. It's 950 bucks for this setup.

* Kooks Street Sleeper 2.5 catback exhaust. This system is meant for the V6 and sounds phenomenal on the LS1. I imagine it would sound equally as well on the V6 powertrain. It's 600 bucks.

* I also have a Curt trailer hitch. It actually looks very nice on the Camaro as it is very stealthy. It sits quite low and did drag on the ground a bit when going down the driveway. I have the wiring harness for that too. It will need four bolts that you can get at the hardware store. It's 40 bucks.

I can do a package deal on the exhaust, just PM me. Also I have the boxes and receipts for everything. Hit me up!!!

Any idea what the shipping for just exhaust would be to FL 33579?

moonlight5 · 09-14-2011, 01:07 PM

I am not sure at all. I imagine it would be rite over a 100. I'll look into it when I have more time and get back to you in a few days.

moonlight5 · 09-19-2011, 05:41 AM

I'm going to lower my pricing. I'll go 800 on the headers with the cats and 500 on the catback.

moonlight5 · 09-22-2011, 08:38 AM

PM sent

LS 1st gen · 09-28-2011, 11:33 PM

Headers are purchased...thanks Mark

TLD0520 · 10-12-2011, 03:51 PM

PM me a price for the hitch plus shipping to 88101 if possible

moonlight5 · 10-13-2011, 02:07 PM

I'll check into the shipping and sell it to you for 30 bucks on top of that. Get back to you tomorrow.

kenkartasasmita · 10-18-2011, 09:44 AM

Dude, 600 for a catback muffler???? I cud pick up to ur house from here.

09-07-2011, 09:19 AM	#1
moonlight5 Drives: Eye catching dark blue 2010 5th gen Join Date: Jan 2011 Location: Houston Posts: 22 View My Garage	Headers and Catback, Trailer hitch. I unfortunately had to trade in my car, a 2010 SS Camaro, for something with more room in the back. But, before I did I took out the headers and catback. They are available through this forum and local pick only. * Kooks headers 1&7/8" to 3", jet coated silver with kooks catted connections 3" to 2&1/2". I have the O2 harness extenders and O2 buds on the cats to pull the rear O2 sensors out of the exhaust streams. It worked incredibly well for me. I never tuned and CELs were not a problem. It's 950 bucks for this setup. SOLD * Kooks Street Sleeper 2.5 catback exhaust. This system is meant for the V6 and sounds phenomenal on the LS1. I imagine it would sound equally as well on the V6 powertrain. It's 600 bucks. AVAILABLE....make me an offer. * I also have a Curt trailer hitch. It actually looks very nice on the Camaro as it is very stealthy. It sits quite low and did drag on the ground a bit when going down the driveway. I have the wiring harness for that too. It will need four bolts that you can get at the hardware store. It's 40 bucks. I can do a package deal on the exhaust, just PM me. Also I have the boxes and receipts for everything. Hit me up!!! Last edited by moonlight5; 09-30-2011 at 07:06 AM. Reason: update

09-12-2011, 04:33 PM	#4
moonlight5 Drives: Eye catching dark blue 2010 5th gen Join Date: Jan 2011 Location: Houston Posts: 22 View My Garage	Pics for the headers, cat-back, and trail hitch thread below. Here are some pics. I can meet you half way since your coming from Austin... Attached Images

09-28-2011, 11:33 PM	#9
LS 1st gen Kept the Faith. Drives: 2010 VR 2SS Join Date: Jan 2008 Location: Houston Posts: 321	Headers are purchased...thanks Mark __________________ SOLD 2010 Camaro # 13694 Victory Red 2SS manual \| White rally Stripes \| Polished Wheels \| Rotofab CAI\| MGW Shifter\| Kooks LT's\| Magnaflow X-pipe\|FM 40 Delta Flows \| Elite Tunnel Brace \| "Ginger" Last edited by LS 1st gen; 09-30-2011 at 12:35 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Aftermarket Exhaust Video Clips Compilation	tjbusa	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	591	07-06-2022 08:38 AM
I'm 16 (2010 Camaro SS) and want headers and loud exhaust, what should i get?	DuhKoDuh	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	85	09-12-2011 10:04 AM
JBA releases exhausts, headers and midpipes.	Bewenched	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	17	09-16-2009 03:04 PM

09-12-2011, 02:49 AM	#2
kenkartasasmita COTW [4/23/12] Drives: Camaro Of The Week. Join Date: Aug 2011 Location: San Diego, CA Posts: 2,088	can i see the picts? i cud pick up to houston.

09-12-2011, 09:20 AM	#3
moonlight5 Drives: Eye catching dark blue 2010 5th gen Join Date: Jan 2011 Location: Houston Posts: 22 View My Garage	I'll post some pics today.

09-14-2011, 01:07 PM	#6
moonlight5 Drives: Eye catching dark blue 2010 5th gen Join Date: Jan 2011 Location: Houston Posts: 22 View My Garage	I am not sure at all. I imagine it would be rite over a 100. I'll look into it when I have more time and get back to you in a few days.

09-19-2011, 05:41 AM	#7
moonlight5 Drives: Eye catching dark blue 2010 5th gen Join Date: Jan 2011 Location: Houston Posts: 22 View My Garage	I'm going to lower my pricing. I'll go 800 on the headers with the cats and 500 on the catback.

09-22-2011, 08:38 AM	#8
moonlight5 Drives: Eye catching dark blue 2010 5th gen Join Date: Jan 2011 Location: Houston Posts: 22 View My Garage	PM sent

10-12-2011, 03:51 PM	#10
TLD0520 NM HT5 Drives: 2010 Black Camaro 2SS M6 Join Date: Jan 2011 Location: Clovis, New Mexico Posts: 202	PM me a price for the hitch plus shipping to 88101 if possible

10-13-2011, 02:07 PM	#11
moonlight5 Drives: Eye catching dark blue 2010 5th gen Join Date: Jan 2011 Location: Houston Posts: 22 View My Garage	I'll check into the shipping and sell it to you for 30 bucks on top of that. Get back to you tomorrow.

10-18-2011, 09:44 AM	#12
kenkartasasmita COTW [4/23/12] Drives: Camaro Of The Week. Join Date: Aug 2011 Location: San Diego, CA Posts: 2,088	Dude, 600 for a catback muffler???? I cud pick up to ur house from here.