02-21-2013, 07:11 AM | #1 |
Drives: 2SS M6 Join Date: Jun 2011
Location: Germany
Posts: 29
|
Euro plate mounts?
Anyone know where to get a mounting kit for euro style plates? Especially for the front of the 2010+ camaro. Mine doesn't even have the mount for US style plates up front, so there is nothing to bolt onto.
__________________
2011 Black 2SS/RS - Kooks headers, GM Performance Exhaust |
02-22-2013, 11:04 AM | #2 |
You can buy plate mounts from several vendors on here and then modify them. Where are you at in Germany PM me and I might have a few other semi legal ideas I'm a MP so I know some tricks lol
|
|
02-22-2013, 11:17 AM | #3 |
You'll get plate mounts from any Camaro Dealer in Germany, shouldn't be an issue.
If you don't wanna drill holes into your car you might also want to consider mounting your plate on the lower grill using clips or cabls/wires... I didn't bother and drilled holes into the front bumper and screwed it on - as I'm not allowed to remove it anyway
__________________
custom build forged LSA, 379ci, TVS2300@15psi, 696rwhp/688ft-lbs, built by DH Individual, Customkingz, tuned by Jannetty Racing
JRE rough idle cam, JRE ported lower intake manifold, OD cog drive, 6% OD crank pulley, ported ls3 heads, NW102mm TB, 1/2'' RDS spacer, IW 8-rib drive Pfadt Cradle Bushings, Arms & Rods, Pedders Supercar w/FE4 conversion, ZL1 sways, HE Twin Carbon Street Slayer, ZL1 Rear End (3.73) CTS-V Brake upgrade, Street: 22'' Vossen CV1, Strip: 18'' Forgestar F14 on MT Street Radials |
|
02-22-2013, 11:21 AM | #4 |
Boo holes in the grille are painful. But yes if you are patient you can zip tie it to the lower grille just don't get caught because it is illegal so hide the ties well
|
|
02-22-2013, 01:21 PM | #5 |
Drives: 2SS M6 Join Date: Jun 2011
Location: Germany
Posts: 29
|
I'm at Wiesbaden. Any dealers around here?
__________________
2011 Black 2SS/RS - Kooks headers, GM Performance Exhaust |
02-22-2013, 09:12 PM | #6 |
Aafes sells the euro plate mounts and zip ties if that's what you are looking at
|
|
06-04-2013, 08:51 AM | #7 |
MSG,Retired US. ARMY
Drives: 2012 ZL1, 11 XC 90, 15 BMW 328i SW Join Date: Feb 2012
Location: Germany
Posts: 233
|
I made my own and mounted it to the screws on the bottom of the front splitter.
Check out our FB Page I am in K-town https://www.facebook.com/AmericanCar...ax_wizard=true
__________________
My build site:
http://www.camaro5.com/forums/showthread.php?t=276256 2012 Camaro ZL1 #151, GCN, Dyno results 701 RWHP Mods; 2.55 Pulley, CAI, LG Cam Package Ti Springs and 9G2X Cam, RX Can, KDI Heat exchanger, Hurst shifter, Orcale Ghosted marker lights, Kooks Long tube headers with Cats deletes and Tuned by Kraftwerks, Pedders 1 inch lowering Springs, Front and rear sway bars, Rear cradle bushing, BMR Trailing arms and toe rods. |
|
|
Thread Tools | |
|
|