06-11-2013, 03:58 PM | #15 | |
Drives: racecars Join Date: Dec 2010
Location: BMN
Posts: 1,776
|
Quote:
+1 The mods and admin probably had seizures and foamed at the mouth when they heard about the series "street outlaws"! I live in okc and had my accord dyno'd at chucks shop(the guy with goatee and white mustang). |
|
06-11-2013, 03:59 PM | #16 | |
PC Technician
Drives: 2016 Hyper Blue 2SS Join Date: May 2012
Location: North Dakota
Posts: 2,161
|
Quote:
Personally I don't care, but I can see where they're coming from.
__________________
|
|
06-11-2013, 04:50 PM | #17 |
Drives: 2012 RS/SS and 2012 2LT/RS Join Date: Dec 2012
Location: Las Vegas Nevada
Posts: 39
|
370 low 13 sec.
|
06-11-2013, 04:55 PM | #18 |
Account Suspended
Drives: Camaro Join Date: Dec 2012
Location: US
Posts: 522
|
|
06-11-2013, 05:20 PM | #19 |
Drives: '11 Cammed LS3, '14 Scion FRS Join Date: Dec 2011
Location: Dallas, TX
Posts: 758
|
So is having longtube headers (even high flow cats won't pass in a lot of places), launching your car, flooring it at all (exhibition acceleration), green halos, lowering springs in some places, etc etc. The track is too far and too costly so no thanks.
__________________
SOLD with a Z06 in the not too distant future: Cammed, boltons, axles, lowered, and more. | 476 WHP |
06-11-2013, 05:24 PM | #20 |
Drives: 2014 CTS-V- totalled/ 45TH ss- SOLD Join Date: May 2013
Location: DFW, TX
Posts: 1,096
|
The Camaro 6 has some serious potential for tuning, while the 370Z is almost completely tapped out tune wise for an engine. The Z motor is nearing the end of it's era, as they have to now turbo charge to get over that 420-430 HP bump after seriously modifying the engine. I know a lot of people who have tried, and blew the block because too much pressure and heat. The BMW motor has the same issue on the straight 6, only so much can be brought out before it becomes a time-bomb. Right about the same horsepower range as the Z also. Hell, they both have trouble running without being tuned :P
__________________
2014 CTS-V... with some go-fast bits coming
|
06-11-2013, 06:37 PM | #21 |
06-11-2013, 06:42 PM | #22 | |
Let's go Rangers!
|
Quote:
Sent from my 2SS/RS |
|
06-11-2013, 06:47 PM | #23 |
06-11-2013, 07:50 PM | #24 |
Account Suspended
Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009
Location: Bradenton, FL
Posts: 6,063
|
Earlier post asked if there were cams for the LFX and yes, in stock.
|
06-12-2013, 01:05 AM | #25 | |
Drives: racecars Join Date: Dec 2010
Location: BMN
Posts: 1,776
|
Quote:
Well I did 13.6 in what basically amounts to the 4 door version of the 370z that weighs 400 lbs more and has a good 30 less hp and 2 less gears. bench racing ftw Last edited by 08-G35s/6MT; 06-12-2013 at 01:32 AM. |
|
06-12-2013, 01:51 AM | #26 |
Drives: '11 Cammed LS3, '14 Scion FRS Join Date: Dec 2011
Location: Dallas, TX
Posts: 758
|
I thought 370z was a 7 speed not an 8? (Going off the 6MT in your name)
__________________
SOLD with a Z06 in the not too distant future: Cammed, boltons, axles, lowered, and more. | 476 WHP |
06-12-2013, 01:51 AM | #27 |
Drives: racecars Join Date: Dec 2010
Location: BMN
Posts: 1,776
|
|
06-12-2013, 08:09 AM | #28 |
Drives: 2013 AGM M6 ZL1, 2008 Tahoe LTZ Join Date: Feb 2013
Location: Westfield, IN
Posts: 372
|
As everyone should know by now. G35 will always be here to inform us that imports smoke camaro's.
His G35 is faster than my ZL1. It's depressing.
__________________
2013 ZL1
|
|
|
Thread Tools | |
|
|