09-20-2011, 07:39 PM | #43 |
Drives: '17 Fifty SS - '18 Traverse Redline Join Date: Jul 2009
Location: Northern Virginia
Posts: 3,616
|
Loving the Saturn Truck LOL
__________________
2017 Camaro SS -"FIFTY"
Mods: "93 Octane" |
09-20-2011, 09:41 PM | #44 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
funny, pics, saturn truck and diet pepsi...almost comical.lol..ordered my stage 4 from jakes..ask for mike...tell him chris and mike sent you...
__________________
|
09-21-2011, 03:34 PM | #45 |
Slow Turtle
|
The 4L80e showed up today, was interesting lifting it by myself at the terminal. I must have felt superhuman for a moment taking it off the pallet, because I damn sure couldn't lift it a second time once I got home to the house it rode home in the passenger seat of the saturn truck
A6 Shifter should be coming later today from Gene@GMPartsHouse, going to convert that to work with the 4L so it all looks factory inside.
__________________
Last edited by DietCoke; 09-21-2011 at 04:26 PM. |
09-21-2011, 04:06 PM | #46 |
Drives: 2010 IBM 2SS/RS Auto Join Date: Apr 2010
Location: Laval, Canada
Posts: 1,542
|
I need me one of those
__________________
Version I
Jannetty Racing 550 RWHP Street Brawler Package, Powered by TVS2300 Maggie http://www.camaro5.com/forums/showthread.php?t=100385 Version II 416ci stroker/4L80e 701rwhp 750rwtq build and tuned by SPI-Performance |
09-21-2011, 04:38 PM | #47 |
Slow Turtle
|
Nothing like direct fit factory parts to make life simple. Definitely going to be using my manual leather boot instead of the cheesy auto plastic gate though. |
09-21-2011, 04:48 PM | #48 |
|
Saturn truck ftw
__________________
2013 Mustang GT Black M6
|
09-22-2011, 01:54 PM | #49 |
Slow Turtle
|
What's on their way from TSP? Small bore magic? Since no one has gotten any numbers on these, looks like I'm going to be the first to publish them.
|
09-22-2011, 05:26 PM | #50 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
did you use the optishift from jake and how much for the shifter...i am geting everything...you have ..lol..trying ton keep track of what i need from you..andy-mount..gmprts-shifter..am i missing anything so far?..thanks, dc
__________________
|
09-22-2011, 08:21 PM | #51 |
Slow Turtle
|
If jake says the optishift is good, then it is. I'll probably end up with that, but I'm not opposed to picking up a used TCI controller either (all about saving money). Holding out for a deal, since it's not a part I need for another few months. Engine Longblock/trans were first to come in, because I need them in to mock up everything important. |
10-01-2011, 04:34 PM | #52 |
Slow Turtle
|
Today's work/parts. Summit box showed up, so got a little work done on the trans and mounting bits. Notice the trans cooler is as large as the flexplate. Big bastard.
The parts The NPS --> 6AN fittings installed into the 4l80 with thread sealant This stuff is BOSS. Also mocked up the trans mount loosely And the trans mount with the crossmember and ADM Performance adapter plate, as it would sit in car. Looks like I'll have to clearance a little off the backside of the adapter plate, its very barely hitting the trans pan, if you can see that in the photo And here's a couple shots of the modified (narrowed) case front with the ears trimmed off, to gain 2.5 inches of clearance, also can see the factory A6 linkage installed to the shift lever on the 4L80. More to follow. |
10-01-2011, 06:50 PM | #53 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
chris, i,m sure your not there yet, but is there a way to use the tranny temp gauge in the 4 pack with the 4l80..also , if you get some spare time.could you jot down a list of things needed for this...flexplate-shifter-trans cooler-trans mount....thanks for the help..
__________________
|
10-01-2011, 07:55 PM | #54 |
Slow Turtle
|
Yeah I'll make a parts and cost list if you want. Surprised no one on here has made one, but most of the swaps I've seen are all shop swaps, and none done at the house like me. I'm not sure how the four pack gets signal (well, where) for the trans temp, but the M6 temp sensor should be able to be mounted on the 4L80 (all trans/oil temp sensor/senders are common across late GM cars), I'll look into solutions for that. It might have an internal sensor that gets logged by the standalone controller, im not sure.
|
10-01-2011, 08:01 PM | #55 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
appreciate chris, and you are correct, i know i can get some answers from andy and cincy spped from jason,s build...but sometimes shop guys don,t want to tell everything since there not getting $$$ for it...don,t really need a price , i just need to log all your parts and get a list...i forgot all about the flex plate till i saw your pics...thats when i decided to hit you up...i been logging a list from your build, might might of missed some stuff...no rush ...subscribed...def interested in gauge as i,m sure you have a 4 pack gauge also..would be nice to utilize...jason did not know , since he has not seen car from cincy speed yet..
__________________
|
10-01-2011, 08:05 PM | #56 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
i think that if you did a nice write up when done , maybe you could get a sticky post in the drivetrain forum...i,m sure a good write up and list for conversion would be a help to others and you could submit to the mods..it would def be very helpful for others looking to do swap...just a idea..guys like you are what makes camaro5 such a good thing..thanks again
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Colorado members check in here | 2010 SS RS | USA - Rockies / Midwest | 8853 | 06-13-2022 07:45 PM |
What do all the abbreviations mean? | CrzyGamr2 | 5th Gen Camaro SS LS LT General Discussions | 77 | 12-07-2012 04:34 AM |
my dyno today(base for e85 tune) | bmorecam | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 51 | 06-08-2011 11:35 AM |
Acronyms? | KEEP RT | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 20 | 03-11-2011 08:57 PM |