Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Rick@Livernois
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Member Car Journals


Reply
 
Thread Tools
Old 09-23-2014, 02:01 AM   #1
jake2212

 
jake2212's Avatar
 
Drives: 2010 camaro 1ss/rs A6 Supercharged
Join Date: Jul 2012
Location: Las Vegas, NV
Posts: 1,084
Jake's Project: Ultimate Street Camaro

Hi everyone, I guess I’ll start off by introducing myself. My name is Jake, I’m 20 years old (21 in October) and currently serving in the United States Air Force as a SrA in Security Forces. I have wanted a Camaro ever since I saw the first 5th Gen riding on the streets. I come from a diehard Chevrolet family; my Pap has owned numerous Corvettes with his latest being a 59 and my mom has owned many Camaros, her latest being a 2002 Z/28.
I saved for this car all through High School and right after High School I went off to Basic Training in San Antonio. On Leave in between tech school and my first duty station back in March of 2013 I found the perfect car, a 2010 Black 1SS/RS with under 8k miles on the dash. I bought it and immediately fell in love with the car. I always wanted to start one of these journals but never really had the time until now, so I figure better late than never.

Mod list:
Engine/powertrain mods
-Magnuson TVS2300 w/ 3.4 pulley
-JRE super tensioner
-CAI Intake
-Vmax ported TB
-Stainless Power 1 7/8” headers-no cats
-Stainless Works 3” retro-chambered cat-back
-Lingenfelter GT9 cam w/ BTR dual valve springs
-LS3 conversion
-80lb FIC injectors & ZL1 fuel pump
-Elite catch can

Suspension mods
-FE6 sway bar conversion
-Pfadt tie rods
-BMR trailing arms
-Apex-Speed lowering springs
-Hotchkis strut tower brace
-BMR tunnel brace
-R1 concepts drilled/slotted rotors & EBC redstuff pads

Cosmetic mods
-ZL1 front Bumper
-ZL1 side rockers
-Z/28 spoiler wrapped satin red
-HRE S101 wheels-Charcoal Gray
-ZL1 rear diffuser
-oracle ghosted LED sidemarkers
-Technostalgia LED taillights
-Seibon carbon fiber 4" cowl hood
-ZL1 steering wheel

Here is a picture of my car the next to my friends Silverado the day I bought it. Consider this a before picture as later down the road I drove my car home after extensive modding on both our ends and took an after picture.

Name:  049.JPG
Views: 1181
Size:  16.4 KB

I didn’t really modify my car for about a month until after I had it, starting off with a Borla Atak axle back and a range AFM delete chip. After driving around for about a month and loving the sound, I decided to add my next round of mods. I ordered a catch can, CAI and VMAX Ported TB from Chase at Apex, and as soon as they arrived I got to adding all the new goodies. I absolutely loved the noticeable difference between stock and what I had at that point. I don’t know why our cars come from the factory with AFM, because with the range chip in (turns off AFM) I noticed no difference in fuel economy.(sorry couldn't find hardly any pictures i took from way back then.)

Name:  039.jpg
Views: 1169
Size:  126.4 KB

Shortly after my basic mods were put on, I had been looking around for stripes, something to make my car really stand out and pop. Well I stumbled upon the NS-1 stripe kit, and after a little picking and choosing, had a local vinyl shop put them on in a carbon fiber style vinyl.

Name:  007.jpg
Views: 1206
Size:  163.3 KB
Name:  086.jpg
Views: 1194
Size:  109.6 KB

That summer I wanted a new exhaust setup on my car. Don’t get me wrong the Borla sounded awesome, but I was looking for more volume. I went down to a local muffler shop and had them cut out my giant resonator and replace it with an x-pipe. I also had them take off the Borla and replace it with a muffler delete and quad tips. The tricky part about this was they had to end up cutting my diffuser to make it fit. I would eventually move up to the quad tip diffuser for our cars, but that took about a month for me to do.

Name:  112.jpg
Views: 1198
Size:  159.2 KB

Around the end of July/early August, I found a killer deal on a rear 1le wheel (had a 285 Goodyear on it) with no miles. I bought it, and now was in search of 3 more wheels. Well Ofer from Gen5DIY was able to get me two fronts and I called Becky from Rodger’s who was able to get me a brand new rear. I drove down to get my wheels off of Ofer and headed straight to Discount tire the next day to have them installed with 285/35/20 Goodyear eagle F1s all round. Here is the end result of which I was incredibly happy with.

Name:  017.jpg
Views: 1242
Size:  219.2 KB
Name:  037.jpg
Views: 1186
Size:  193.5 KB

2 months or so later, I was able to come across a decent set of Stainless Power headers that were never installed, so I bought them and had a buddy of mine install them at his shop. Man was the car woken up. It got insanely louder and kicked out a lot easier in the rear end. I took it to get tuned and it came in at 360/375 on a Dynojet Dyno. My car was well on its way to becoming one of the baddest street cars around.

Name:  006 (3).jpg
Views: 1175
Size:  202.5 KB

November of that year I spent back home in Pittsburgh on leave (I flew home, no rocky mountains in November for my car!) but December I was able to buy a set of FE6 sway bars and conversion parts off of Ofer and a couple good friends of mine helped me install them later that month. I noticed a great difference in performance from the weak FE3 to the strong track-oriented FE6 parts and was very happy with these new sway bars.

Name:  003 (2).jpg
Views: 1185
Size:  198.5 KB

That next year, early in January, I was talking to Ofer about getting ahold of a ZL1 front bumper. When it came in, I drove down to get it from him. I must say this bumper is one of the best looking bumpers on our car and I am incredibly happy as there is such a difference in look. My car looks much more aggressive now, like it wants to chew the ass off a mustang and crap it out as a focus.

Name:  003.jpg
Views: 1174
Size:  105.2 KB
Name:  007 (3).jpg
Views: 1171
Size:  190.4 KB

Around February I bought an ACS TL1 insert off of Ofer and had it taken to get painted. It wouldn’t be installed until the next month, when my friend Gene was able to help me cut up my hood and put it on. The second half of that month was mainly spent talking with a shop about what camshaft to put in my car! I was thinking of going FI in the future so I knew that would be a determining factor. I also would need it to be street-able. I ended up choosing the GT9 cam from Lingenfelter, and had it installed at the end of February by Leading Edge Performance here in Las Vegas. All parts installed are as follows: BTR dual valve springs, 7.400 pushrods, complete DOD delete kit including LS7 lifters, and of course, the GT9 cam. Car officially dyno’ed at 405/382, and was a complete beast now.

Name:  016 (2).jpg
Views: 1178
Size:  146.2 KB
Name:  066.PNG
Views: 1154
Size:  330.6 KB

In March, I talked to Ofer and he said he heard I got my cam and wanted to know if I was looking to buy a supercharger anytime soon, as he had one he would like to sell me. I was surprised and also very happy, and so I of course told him yes. I ended up getting a red Magnuson TVS2300 with a 3.4 pulley, zl1 fuel pump, 80lb FIC injectors, and all supporting parts/pieces. Unfortunately it would be awhile until I would be able to have it installed, but man was it worth the wait.

Name:  019.jpg
Views: 1185
Size:  180.7 KB

Around April, I was able to get some ZL1 side rockers which Ofer had for sale, so my friend Gene helped me paint and install them on my car. I was also finally able to put my r1 concept rotors and Hawk HPS pads on, and I absolutely love them. I think they are much better than the stock pads and rotors. Near the end of that month I also had finally burned down the rear Goodyear’s on my car, and it was time for some new rubber. I ultimately decided that the Michelin Pilot Super Sports’s were the best choice, so I got 285/35/20 for the front and 315/35/20 for the rear. These new tires are absolutely insane, so much better than the Goodyear’s, it’s like night and day!

Name:  073.jpg
Views: 1200
Size:  157.6 KB
Name:  092.jpg
Views: 1183
Size:  133.3 KB

A little later that spring I had to start thinking about supporting mods for the future Maggie I would be putting on, and so Chase at Apex helped me out and I was able to get a set of Pfadt tie rods and BMR trailing arms. Those two pieces really stiffened up my rear and I was very impressed how much the polyurethane bushings helped with wheel hop.

The time has finally come for the big moment!! Around mid-summer I finally was able to get the supercharger installed by the same friend that installed my headers for me. He installed my supercharger along with a Stainless Works 3” retro-chambered cat-back with quad tips. My car dyno’ed in at 558/511 on a dynojet. Initially I had tome belt slip but that was all fixed with a JRE super tensioner. Nothing could have prepared me for the massive power increase that came with my supercharger. I still have permagrin every time I get in my car, it is an absolute monster and I could not be happier!

Name:  005 (3).jpg
Views: 1134
Size:  117.0 KB
Name:  006.jpg
Views: 1138
Size:  125.3 KB
Name:  001 (2).jpg
Views: 1119
Size:  151.5 KB
Name:  028.PNG
Views: 1126
Size:  295.8 KB

Later in July I was able to get a hold of a Z/28 spoiler from Ofer and had it painted to match and installed. It really improved the aggressiveness of my car and it really looks basa$$! Just another little piece to tie everything together into an ultimate street car.

Name:  007.PNG
Views: 1131
Size:  477.7 KB

On August 4, I took leave again to go home for 3 weeks. This time, I drove my car, and seeing the country was amazing. 2200 miles was done in 2 days with the help of my father (trip home) and my mother (return trip.) We took I-70 all the way from Las Vegas to Pittsburgh and back. While I was home I had a few goodies installed and they were a Hotchkis strut tower brace, and a set of Apex-Speed lowering springs that I bought off of Chase. The strut tower brace improved steering feel and also looks really good under the hood. The lowering springs really improved the stance and looks overall and I must say the ride didn't suffer at all. I was also able to take a picture or two with my friends truck and my car (that after picture I mentioned earlier in the thread.)

Name:  075.jpg
Views: 1116
Size:  184.5 KB
Name:  026 (2).jpg
Views: 1124
Size:  106.6 KB
Name:  070.jpg
Views: 1124
Size:  204.4 KB

Once I got back to Las Vegas, at the end of august, I felt as if my project car was nearly complete. I, however, was completely wrong. I got a text from a friend asking if I would like to buy a new set of wheels. Now let me give you a little back story to these wheels. I first saw these beauties on a friend of mine's ZL1 in August of 2013 when we went on the big cruise to Mt Charleston and I instantly fell in love with them. I think these are arguably the best looking wheels on a Camaro, and I was excited to get be able to get them for my car. These HRE S101 wheels are my favorite mod on my entire car, second being the supercharger.

Name:  012 (3).jpg
Views: 1249
Size:  150.4 KB
Name:  010 (2).jpg
Views: 1167
Size:  113.2 KB
Name:  016.jpg
Views: 1192
Size:  142.4 KB

Big shout out to all my friends who have helped me along the way with my project car:
Ofer, Alex, Gene & Wanda, my brother Paul, any friends along the way i forgot to mention and my parents for teaching me that hard work pays off.
__________________
Check out my build thread: Project Ultimate Street Camaro
http://www.camaro5.com/forums/showthread.php?t=378443


Last edited by jake2212; 08-17-2015 at 02:57 PM.
jake2212 is offline   Reply With Quote
Old 09-23-2014, 02:04 AM   #2
jake2212

 
jake2212's Avatar
 
Drives: 2010 camaro 1ss/rs A6 Supercharged
Join Date: Jul 2012
Location: Las Vegas, NV
Posts: 1,084
Added bonus! Back in late July I was going through the drive-thru of Sonic and the person behind me was at the order speaker. The girl working actually had to come outside to take her order because my car was so loud that they couldn't hear each other. I felt pretty bad but at the same time this was very funny in my eyes.
Name:  014.jpg
Views: 1079
Size:  106.7 KB
__________________
Check out my build thread: Project Ultimate Street Camaro
http://www.camaro5.com/forums/showthread.php?t=378443

jake2212 is offline   Reply With Quote
Old 09-23-2014, 04:02 AM   #3
Black Knight

 
Black Knight's Avatar
 
Drives: Supercharged LLT
Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,119
Sweet build ,wheels look great
__________________
CLICK IMG FOR BUIlD THREAD
Black Knight is offline   Reply With Quote
Old 09-23-2014, 04:05 AM   #4
JakesRJT
 
JakesRJT's Avatar
 
Drives: 2011 Camaro 3.6L V6
Join Date: Sep 2014
Location: South Georgia
Posts: 153
Very nice build! Awesome car, I can only hope to have a Camaro this nice in my future!
__________________
Check out my Build Thread! Feedback is Welcome and Appreciated!
JakesRJT is offline   Reply With Quote
Old 09-23-2014, 06:27 AM   #5
camaro500
 
camaro500's Avatar
 
Drives: 2013 Camaro 2SS/RS
Join Date: Apr 2013
Location: Canada
Posts: 667
SICK CAR MAN! Coolest set of wheels a 21 year old could have! Congrats. Thank you for your service.
__________________
Jannetty Racing 444rwhp/422rwtq
camaro500 is offline   Reply With Quote
Old 09-23-2014, 12:00 PM   #6
jake2212

 
jake2212's Avatar
 
Drives: 2010 camaro 1ss/rs A6 Supercharged
Join Date: Jul 2012
Location: Las Vegas, NV
Posts: 1,084
thanks for all the compliments guys!
__________________
Check out my build thread: Project Ultimate Street Camaro
http://www.camaro5.com/forums/showthread.php?t=378443

jake2212 is offline   Reply With Quote
Old 09-23-2014, 02:09 PM   #7
Bradley
Shadow 200 TUAV
 
Bradley's Avatar
 
Drives: 2010 Camaro 2SS/RS IBM, 1994 Camaro
Join Date: Dec 2009
Location: Sierra Vista, AZ
Posts: 244
Nice looking ride,
__________________

Ordered - 14 Aug 2009 Born - 4 Nov 2009 Delivered - 17 Dec 2009
Bradley is offline   Reply With Quote
Old 09-23-2014, 04:39 PM   #8
Behic2320
SoCal HT5 COTW 4/21/13
 
Behic2320's Avatar
 
Drives: 2011 SS/RS Blown & Cammed LS3
Join Date: Sep 2011
Location: Sandy Eggo
Posts: 3,041
where has this thing been, great build man. What I would do for a red Maggie haha
__________________
Behic2320 is offline   Reply With Quote
Old 09-23-2014, 07:05 PM   #9
nicave13@gmail.com
LED god
 
nicave13@gmail.com's Avatar
 
Drives: 2010 Inferno Orange Camaro SS/RS
Join Date: Oct 2010
Location: Las Vegas, NV
Posts: 504
Great thread on an amazing car Jake. Just one question, when am I gonna drive it
__________________
nicave13@gmail.com is offline   Reply With Quote
Old 09-23-2014, 08:35 PM   #10
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 12,301
Car has come a long way, and you deserve it.
__________________
2SSRS@Gen5diy is offline   Reply With Quote
Old 09-24-2014, 07:42 PM   #11
jake2212

 
jake2212's Avatar
 
Drives: 2010 camaro 1ss/rs A6 Supercharged
Join Date: Jul 2012
Location: Las Vegas, NV
Posts: 1,084
Quote:
Originally Posted by 2SSRS@Gen5diy View Post
Car has come a long way, and you deserve it.
Thanks Ofer!
__________________
Check out my build thread: Project Ultimate Street Camaro
http://www.camaro5.com/forums/showthread.php?t=378443

jake2212 is offline   Reply With Quote
Old 09-25-2014, 07:11 AM   #12
RGRCamaro
 
RGRCamaro's Avatar
 
Drives: 2011 Camaro 2SS
Join Date: Sep 2012
Location: Tulsa, Oklahoma
Posts: 532
Absolutley badass!

How was installing the TL1 insert? I have been thinking about it and their T1 bumper.

That Maggie man....mine is black...but now I wish it was red!
__________________
2011 Camaro 2SS/RS LS3 M6 - 672rwhp/581rwtq - 91 octane tune

RGRCamaro is offline   Reply With Quote
Old 09-25-2014, 08:27 AM   #13
rgrmoreira13
 
rgrmoreira13's Avatar
 
Drives: 2015 2SS 1LE
Join Date: Apr 2013
Location: Miami WADE County
Posts: 741
that car looks simply stunning in all aspects. I won't be suprised if you get a COTW nomination soon.
__________________
Current Car(s)
2015 Camaro 2SS 1LE 6.2L V8- Dream Car
2015 Equinox 2.4L I4- (Married Man with a kid ^__^)

Previous Cars
2013 Camaro 1LS 3.6L V6 - Traded
1995 Toyota Pickup 2.4L I4- Sold
1985 Mazda Rx-7 1.8L (Red) - Total Loss
1985 Mazda Rx-7 Turbo 1.8L Rotary ( White)- Sold
1996 Honda Accord 2.7L V6 - Wrecked
1998 Dodge Intrepid POS Engine- Lemon
rgrmoreira13 is online now   Reply With Quote
Old 09-25-2014, 10:40 AM   #14
jake2212

 
jake2212's Avatar
 
Drives: 2010 camaro 1ss/rs A6 Supercharged
Join Date: Jul 2012
Location: Las Vegas, NV
Posts: 1,084
Quote:
Originally Posted by RGRCamaro View Post
Absolutley badass!

How was installing the TL1 insert? I have been thinking about it and their T1 bumper.

That Maggie man....mine is black...but now I wish it was red!
oh i know! at first i had doubts of it looking good but now I am so happy it's red, really makes it pop out of the hood! Installing the TL1 insert was very easy, just remember to measure 4 times, check fitment, measure again and then cut! you only get one go around with the cut so it's gotta be straight. other than that it was cake. simply drill remove the hood, tape it up so you dont scratch the paint with metal shavings, measure, check fitment, cut, and put it on! after that you're gonna want to clamp down the insert until the weather sealer drys ( a few hours) and its all good after that.
__________________
Check out my build thread: Project Ultimate Street Camaro
http://www.camaro5.com/forums/showthread.php?t=378443

jake2212 is offline   Reply With Quote
Old 09-25-2014, 10:41 AM   #15
jake2212

 
jake2212's Avatar
 
Drives: 2010 camaro 1ss/rs A6 Supercharged
Join Date: Jul 2012
Location: Las Vegas, NV
Posts: 1,084
Quote:
Originally Posted by rgrmoreira13 View Post
that car looks simply stunning in all aspects. I won't be suprised if you get a COTW nomination soon.
thank you very much, I can only hope!
__________________
Check out my build thread: Project Ultimate Street Camaro
http://www.camaro5.com/forums/showthread.php?t=378443

jake2212 is offline   Reply With Quote
Old 09-25-2014, 12:02 PM   #16
c5Legend
Camaro5
 
c5Legend's Avatar
 
Drives: 2010 Camaro 2LT
Join Date: Jun 2011
Location: WA
Posts: 991
Awesome ride man, you got any vids of how it sounds??
__________________

My Build
'11 Chrysler 300 Limited / '10 Camaro 2LT
c5Legend is offline   Reply With Quote
Old 09-27-2014, 02:20 AM   #17
jake2212

 
jake2212's Avatar
 
Drives: 2010 camaro 1ss/rs A6 Supercharged
Join Date: Jul 2012
Location: Las Vegas, NV
Posts: 1,084
Quote:
Originally Posted by c5Legend View Post
Awesome ride man, you got any vids of how it sounds??
yes, but none have been uploaded to YouTube yet, I'll get some up soon
__________________
Check out my build thread: Project Ultimate Street Camaro
http://www.camaro5.com/forums/showthread.php?t=378443

jake2212 is offline   Reply With Quote
Old 09-27-2014, 08:40 AM   #18
Desert Stealth
 
Desert Stealth's Avatar
 
Drives: 2014 CRT ZL1 Convertible Automatic
Join Date: Dec 2012
Location: Las Vegas, NV
Posts: 155
Great job, Jake. I am sure you are loving the drive!
__________________
Desert Stealth is offline   Reply With Quote
Old 09-30-2014, 11:55 AM   #19
jewel25
JEWEL
 
jewel25's Avatar
 
Drives: 2011 RJT 2LT/RS
Join Date: Apr 2011
Location: Las Vegas
Posts: 36,417
Great build, Jake!!!
__________________
jewel25 is offline   Reply With Quote
Old 09-30-2014, 01:21 PM   #20
RubyCamaro
Jan
 
RubyCamaro's Avatar
 
Drives: 2010 Camaro 1LT Red Jewel tintcoat
Join Date: May 2010
Location: Springfield, TN
Posts: 14,824
__________________
RubyCamaro is offline   Reply With Quote
Old 01-04-2015, 12:22 PM   #21
alcal1084
 
Drives: 2012 45TH AE SS
Join Date: Jul 2009
Location: Las Vegas
Posts: 479
This car deserves Camaro the week!!!
alcal1084 is offline   Reply With Quote
Old 01-31-2015, 12:59 PM   #22
jake2212

 
jake2212's Avatar
 
Drives: 2010 camaro 1ss/rs A6 Supercharged
Join Date: Jul 2012
Location: Las Vegas, NV
Posts: 1,084
Quote:
Originally Posted by alcal1084 View Post
This car deserves Camaro the week!!!
I can only hope!
__________________
Check out my build thread: Project Ultimate Street Camaro
http://www.camaro5.com/forums/showthread.php?t=378443

jake2212 is offline   Reply With Quote
Old 02-22-2015, 11:35 AM   #23
jake2212

 
jake2212's Avatar
 
Drives: 2010 camaro 1ss/rs A6 Supercharged
Join Date: Jul 2012
Location: Las Vegas, NV
Posts: 1,084
Haven't posted anything lately to the car journal but I have been busy with a few mods, I added front extensions to the zl1 bumper, as well as a zl1 rear diffuser and oracle ghosted LED side markers. The side markers really change the look of the car and I think it's really cool how they are so bright they reflect off the jersey barriers on the highway. The extensions for the front bumper really completed the look and they're a nice subtle difference that really shows attention to detail. The diffuser is something I've been holding onto for awhile but never had the chance to install until recently but I am happy I finally did. Next on the list is a zl1 steering wheel.
__________________
Check out my build thread: Project Ultimate Street Camaro
http://www.camaro5.com/forums/showthread.php?t=378443

jake2212 is offline   Reply With Quote
Old 02-22-2015, 11:37 AM   #24
jake2212

 
jake2212's Avatar
 
Drives: 2010 camaro 1ss/rs A6 Supercharged
Join Date: Jul 2012
Location: Las Vegas, NV
Posts: 1,084
Here are a few pics of my latest additions
Attached Images
 
__________________
Check out my build thread: Project Ultimate Street Camaro
http://www.camaro5.com/forums/showthread.php?t=378443

jake2212 is offline   Reply With Quote
Old 03-24-2015, 05:22 PM   #25
jake2212

 
jake2212's Avatar
 
Drives: 2010 camaro 1ss/rs A6 Supercharged
Join Date: Jul 2012
Location: Las Vegas, NV
Posts: 1,084
Got a new vinyl design done on the car, red aluminum vinyl put on the spoiler, insert and grand sport stripes on the hood and fender.
Attached Images
 
__________________
Check out my build thread: Project Ultimate Street Camaro
http://www.camaro5.com/forums/showthread.php?t=378443

jake2212 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:39 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2015, vBulletin Solutions, Inc.