Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
B&M
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons

Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons Bolt-Ons | Intakes | Exhaust

Reply
 
Thread Tools
Old 09-25-2010, 07:24 AM   #1
sub zero

 
sub zero's Avatar
 
Drives: RED@2SS
Join Date: Aug 2010
Location: UAE
Posts: 1,380
Question what is purpose of FAST INTAKE 102mm ?

hi everybody


i'm thinking now aboute FAST INTAKE 102mm for my L99 , but i don't have enoph information aboute it and the maximam hourse power can i git from it ?


any body can help ?
sub zero is offline   Reply With Quote
Old 09-25-2010, 07:44 AM   #2
papabearcamaro

 
papabearcamaro's Avatar
 
Drives: 2012 Chevrolet Silverado 4x4 Z71
Join Date: Dec 2009
Location: WI.
Posts: 1,749
__________________
SOLD(Traded for 2012 Silverado Z71 4x4 and 2012 Sonic Hatch.)...2010 Camaro 1SS/RS/LS3,yellow with House of Kolor Tangerine Pearl rally stripes,manual trans.Hurst short throw shifter,4 pack rally gauges,Roto-Fab air intake,Kooks long tube headers with high-flow cats,Borla S-Type catback exhaust,Comp Cam,PRC ported heads,Maggie with 3.6 pulley and 1:1 cog drive,secondary fuel system with 65lb injectors,ADM digital A/F and Boost gauge,Pfadt trailing arms and subframe bushings.614.25rwhp/566.82rwtq on 8# of boost.

2012 Chevrolet Silverado 1500 EX.Cab 4X4 Z71.
papabearcamaro is offline   Reply With Quote
Old 09-25-2010, 08:54 AM   #3
MillerTime
Blowin the doors off!
 
MillerTime's Avatar
 
Drives: A 2013 SS RS 6M SR
Join Date: Apr 2010
Location: Phoenix, AZ
Posts: 2,401
Increased/smoother air flow. Won't see much, if any, gain unless your going with a super/Turbo charger.
__________________

2G1FS1EWXD9163847





MillerTime is offline   Reply With Quote
Old 09-25-2010, 09:46 AM   #4
JUISSD

 
JUISSD's Avatar
 
Drives: 2010 White/IOM 2SS/RS M6
Join Date: Jul 2010
Location: Houston, TX
Posts: 1,236
On a stock engine or even with bolt ons the FAST 102 is a waste of time. With an aggressive heads/cam combo or a supercharger you'll see some gains though.
__________________
2010 White/IOM Camaro 2SS/RS M6


JUISSD is offline   Reply With Quote
Old 09-25-2010, 11:21 AM   #5
J-Rod6410
M6 10 second club
 
J-Rod6410's Avatar
 
Drives: A 4000 Lb BeaSSt
Join Date: Jul 2009
Location: Crackin Azz on a hi-way near you
Posts: 1,050
LMR did a cammed camaro that put out 461rwhp. Then they added the FAST intake and 102 throttle body. Then it put out 475rwhp. If you think $1400-1500 in parts is worth 15 rwhp then go for it. I personnally would put that money towards a s/c for the future.

BTW on a stock engine there's pretty much no gain
__________________
TEAM LS3 Best pass: 10.72 @ 132

919RWHP 749RWTQ ECS S/C stock bottom end
Built by: J-Rod.... Tuned by: Matt Sorian @ FSP (floridaspeedandpower.com)
Check out my youtube channel: http://www.youtube.com/user/6410Jrod
Follow me on Instagram: @J_Rod6410
J-Rod6410 is offline   Reply With Quote
Old 09-25-2010, 11:22 AM   #6
Andro
NOICE!!! ™
 
Andro's Avatar
 
Drives: Force Fed 427
Join Date: Jan 2009
Location: GOT BOOST?
Posts: 5,216
If you ain't moving alot of air there is no need to waste your money on the intake
__________________
Andro is offline   Reply With Quote
Old 09-25-2010, 11:23 AM   #7
J-Rod6410
M6 10 second club
 
J-Rod6410's Avatar
 
Drives: A 4000 Lb BeaSSt
Join Date: Jul 2009
Location: Crackin Azz on a hi-way near you
Posts: 1,050
Quote:
Originally Posted by Andro View Post
If you ain't moving alot of air there is no need to waste your money on the intake
Well said
__________________
TEAM LS3 Best pass: 10.72 @ 132

919RWHP 749RWTQ ECS S/C stock bottom end
Built by: J-Rod.... Tuned by: Matt Sorian @ FSP (floridaspeedandpower.com)
Check out my youtube channel: http://www.youtube.com/user/6410Jrod
Follow me on Instagram: @J_Rod6410
J-Rod6410 is offline   Reply With Quote
Old 09-25-2010, 12:00 PM   #8
JS
 
JS's Avatar
 
Drives: 2010 Camaro SS
Join Date: May 2010
Location: Phila,Pa.
Posts: 559
Our testing has shown 5RW on a NA setup, 20RW+ on a FI setup
I would stick with the LS3 intake
__________________
SOLD
2010 Camaro 1SS/A6
12.59@111.31
Magnaflow Magnapack Axleback & Resonated X-Pipe/OBX LT Headers/Airaid Cold Air Kit/Injection Connection Tuned
JS is offline   Reply With Quote
Old 09-25-2010, 03:23 PM   #9
orange-prince
QATAR 2022
 
orange-prince's Avatar
 
Drives: black cts-V coupe a6
Join Date: Apr 2010
Location: doha-qatar ( middle east )
Posts: 990
with cam and heads it's worth it
orange-prince is offline   Reply With Quote
Old 09-27-2010, 02:24 AM   #10
VADER SS L99


 
VADER SS L99's Avatar
 
Drives: 2010 Camaro SS L99
Join Date: Nov 2009
Location: Edmond, OK
Posts: 2,575
I have seen that intake LOOSE RWHP and TQ on full bolt on cars. On one car I even read where the car lost power on a heads and cam car and that was a stage 2 cam and very high flow Mast Black Label heads. Other than a Centri supercharger set up or Turbo build I think that Intake is a waste of money. It might work on a NA motor but probably only see worthy gains on 416+CI and big nasty cams with alot of head work.
__________________
BLK/BLK 1SS/RS Ordered 11-01-2009 Took delivery 12-22-2009.
VADER SS L99 is offline   Reply With Quote
Old 09-27-2010, 10:53 AM   #11
lostinvt
Serial #589!
 
lostinvt's Avatar
 
Drives: 2010 2RS/SS
Join Date: Aug 2009
Location: Bergen County, NJ
Posts: 85
Feel free to throw rocks at me, but it seems a little backwards that you want a part before you know what it does, right? Unless you have a great deal on it, like too good to pass up, someone giving it to you....

Just my opinion of course!
lostinvt is offline   Reply With Quote
Old 09-27-2010, 01:46 PM   #12
Asylum
Account Suspended
 
Asylum's Avatar
 
Drives: 2010 2SS RS Black on Black Manual 6
Join Date: Sep 2009
Location: Brampton
Posts: 445
Quote:
Originally Posted by lostinvt View Post
Feel free to throw rocks at me, but it seems a little backwards that you want a part before you know what it does, right? Unless you have a great deal on it, like too good to pass up, someone giving it to you....

Just my opinion of course!
If he knew how the mechanics worked in regards to the part he was looking at then he wouldn't have asked the question.

Would it kill people to be decent on here?

I mean **** look at me.
I just did
full CraneCam Rockers, valve springs, retainers, compcams custom grind cam.
headers, intake, exhaust, custom tune. and several other small things.
push rods.. ect ect ect.


Want some fun facts?
I know sweet **** all about the mechanics behind the parts, but thats why I rely on the honesty and the education provided to me at the performance shop I use for my mods.



pfft
You buy a really good laundry machine, do you know it works?

Seriously people.. the forum is for information, to ask, to answer.. if you cant be pleasant or tactful, browse to a new site?
Asylum is offline   Reply With Quote
Old 09-27-2010, 01:56 PM   #13
lostinvt
Serial #589!
 
lostinvt's Avatar
 
Drives: 2010 2RS/SS
Join Date: Aug 2009
Location: Bergen County, NJ
Posts: 85
There is no need for you to be nasty with me....I said, quite honestly and plainly, that it just seems backwards to want something before you know what it does....
Its like saying you want to upgrade your Cisco ASA firewall with the security plus license, but by the way, what does that license do?
It's not like "i want this goal, or this feature, does this part do that?"
lostinvt is offline   Reply With Quote
Old 09-27-2010, 02:11 PM   #14
DSteck
Account Suspended
 
Drives: 2006 Corvette Z06
Join Date: Feb 2010
Location: St. Louis, MO
Posts: 590
For a stock cam setup that's still NA, it's not worth it. The cathedral port 102 actually works on the LS2 cars, but the LS3 cars don't leave much to be gained.

I'm only doing a FAST 102 on my cammed LS7 to try and inch over 600whp... it's ultimately not a mod that's "money well spent" unless you're really trying to squeeze everything from a setup. If you are seeing your manifold pressure drop more than 1-2 kPa during wide open throttle, then you could probably benefit from the larger plenum volume.
DSteck is offline   Reply With Quote
Old 09-27-2010, 02:54 PM   #15
yyz28
 
yyz28's Avatar
 
Drives: 2000 Sebring Silver Z28
Join Date: Mar 2010
Location: McKinney, TX
Posts: 66
FAST Intakes make a lot of sence on cars with Heads/Cam package where the flow has been greatly improved on the engine or on Turbo applications. On a stock or bolt on car, it will give you SOME gain, but the cost to play can be used on other more meaningful mods.

Good luck!
yyz28 is offline   Reply With Quote
Old 09-27-2010, 10:41 PM   #16
Asylum
Account Suspended
 
Asylum's Avatar
 
Drives: 2010 2SS RS Black on Black Manual 6
Join Date: Sep 2009
Location: Brampton
Posts: 445
Quote:
Originally Posted by lostinvt View Post
There is no need for you to be nasty with me....I said, quite honestly and plainly, that it just seems backwards to want something before you know what it does....
Its like saying you want to upgrade your Cisco ASA firewall with the security plus license, but by the way, what does that license do?
It's not like "i want this goal, or this feature, does this part do that?"
Just wanted to apologize as after reading my post I can see how it came off quite negative.. My bad :(

Please forgive me
Asylum is offline   Reply With Quote
Old 09-28-2010, 03:24 AM   #17
Ivan @ Southwest Speed

 
Ivan @ Southwest Speed's Avatar
 
Drives: '10 2SS/RS, '96 Z28
Join Date: May 2009
Location: Rio Rancho, NM
Posts: 11,862
The purpose of the FAST 102 Intake is...

to paint and put on top of the World's first LS3 Based 4xxci motor....!!!

Ivan @ Southwest Speed
Attached Images
 

Last edited by Ivan @ Southwest Speed; 09-28-2010 at 10:08 AM. Reason: idiocy
Ivan @ Southwest Speed is offline   Reply With Quote
Old 09-28-2010, 08:51 AM   #18
IPS Brandon
 
IPS Brandon's Avatar
 
Drives: 2010 Camaro SS black
Join Date: Aug 2009
Location: Columbus Ohio
Posts: 907
Send a message via AIM to IPS Brandon
Quote:
Originally Posted by Ivan @ Southwest Speed View Post
to powdercoat and put on top of the World's first LS3 Based 4xxci motor....!!!

Ivan @ Southwest Speed
How do you powdercoat plastic
IPS Brandon is offline   Reply With Quote
Old 09-28-2010, 09:00 AM   #19
lostinvt
Serial #589!
 
lostinvt's Avatar
 
Drives: 2010 2RS/SS
Join Date: Aug 2009
Location: Bergen County, NJ
Posts: 85
Its all good asylum...
lostinvt is offline   Reply With Quote
Old 09-28-2010, 10:09 AM   #20
Ivan @ Southwest Speed

 
Ivan @ Southwest Speed's Avatar
 
Drives: '10 2SS/RS, '96 Z28
Join Date: May 2009
Location: Rio Rancho, NM
Posts: 11,862
Quote:
Originally Posted by IPS Brandon View Post
How do you powdercoat plastic
But with paint of course...LMAO

I was up late. It's painted not powdercoated!
Ivan
Ivan @ Southwest Speed is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ADM Performance "Street" and "Race" intake systems from Apex Motorsports Apex Motorsports V8 Bolt-Ons & Tunes 12 07-16-2010 08:47 PM
FAST intake manifold is garbage! tsears Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 104 06-11-2010 10:52 AM
Late Model Racecraft Slayer Package with F.A.S.T 102mm intake and LMR 102TB!! Late Model Racecraft Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 11 02-03-2010 12:30 AM
New FAST LSX-R 102mm intakes for LS3 maybelooking Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 27 09-18-2009 11:19 PM


All times are GMT -5. The time now is 03:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.