Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
PFYC
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons

Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons Bolt-Ons | Intakes | Exhaust

Reply
 
Thread Tools
Old 09-27-2010, 09:44 PM   #1
Ovenmitt
Account Suspended
 
Drives: 2011 RJT 1SS
Join Date: Apr 2010
Location: Fort Lewis, Washington
Posts: 733
Send a message via AIM to Ovenmitt
GM cam gear timing mark?

I'm guessing the factory timing mark on the cam gear is the beveled slot looking thing next to a tooth? Its the only thing I could see that remotely resembled a timing mark. Guess we'll see here in 3-4 hours once i change the springs and put her back together
Ovenmitt is offline   Reply With Quote
Old 09-28-2010, 09:21 AM   #2
Ivan @ Southwest Speed
Southwestspeed.net

 
Ivan @ Southwest Speed's Avatar
 
Drives: '10 2SS/RS, '96 Z28
Join Date: May 2009
Location: Rio Rancho, NM
Posts: 11,650
Try this...

Let us know how she comes out.
Attached Images
 
Ivan @ Southwest Speed is offline   Reply With Quote
Old 09-28-2010, 06:31 PM   #3
Ovenmitt
Account Suspended
 
Drives: 2011 RJT 1SS
Join Date: Apr 2010
Location: Fort Lewis, Washington
Posts: 733
Send a message via AIM to Ovenmitt
Yep. Mine looked exactly like yours, but with no red dot. I just used the bevel slot, since (like in your picture) its in the same spot anyway.
Ovenmitt is offline   Reply With Quote
Old 09-28-2010, 06:50 PM   #4
Ivan @ Southwest Speed
Southwestspeed.net

 
Ivan @ Southwest Speed's Avatar
 
Drives: '10 2SS/RS, '96 Z28
Join Date: May 2009
Location: Rio Rancho, NM
Posts: 11,650
Cool...this is an LS9 but it will give the same idea hopefully.

Let us know how it works out for you and good luck man!
Ivan
Ivan @ Southwest Speed is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
how to get best 0-60MPH on L99 Moonlight Dragstrip and Launch Techniques Discussion 52 01-03-2012 09:59 PM
Parts needed for a DIY cam install and estimated cost? robertway Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 1 08-09-2010 09:06 AM
Interesting article on LSA powered 2010 Camaro Sax1031 Camaro ZL1 Forum - ZL1 Specific Topics 43 05-26-2010 07:30 PM
L99 A6 (D or M -always starts you out in 1st gear) SGOS252382 Dragstrip and Launch Techniques Discussion 3 04-20-2010 06:27 PM
Cam gear question 4xchamp Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 2 04-16-2010 07:01 PM


All times are GMT -5. The time now is 05:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.