Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vitesse Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum

Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum All audio, video, bluetooth, nav, radar, and electronics discussions.

Reply
 
Thread Tools
Old 08-24-2011, 01:16 PM   #751
copper3000
(aka) Troy & Maria
 
copper3000's Avatar
 
Drives: 2SS/RS 6M CGM/Black Stripes w GE
Join Date: Oct 2009
Location: Tucson, AZ
Posts: 1,293
Quote:
Originally Posted by destroyerofu2 View Post
ok
when I made the appt i showed them the paper and my sw/hw.
told them they have to order a new part. they said ok they will look into it.
so I dropped the car off monday night, appt was for tuesday at 8:00am.
I called at 1:45pm to see if they were done yet so i could pick it up.
nope the guy has yet to start it and will be 45 min before he does (claimed another appointment has tied up his whole day) I said ok. (trying to be nice)

I called back at 3:45pm to check and got voice mail. left a message asking if they have fixed it or not and that I would like to have my car back to day if that was possable.

I called once more at 4:00pm since I had not heard back yet. and got put into voice mail. left number asking if i can pick it up today or what
(trying not to be crappy) cause its a 35min drive to dealer and they close at 5:00pm
so finally they call back at 4:15pm and i missed the call (was on phone with plumer because a pipe in the basement broke, story for a diff day) got message yes i can pick up car to day we will have it buttoned up when you get here. I try calling back to see if they fixed it or just looked at it, and got kicked into voice mail.
so i leave and head to dealer ship, get there at 4:55pm. notice it was sitting out front rain spots all over it and it hasn't rained for over and hour. I go inside and ask if its ready, the service writer say yet its all set. I pause, so you fixed it and replaced the module? he looks at me, no but we did find out that you do have the older one and need the new one, we put it on order and we will call you when it comes in.

(fighting back the urge to punch the guy) I ask when will it be in. he says "not sure, we didn't order it until late today and they couldn't tell us when we would have it."

(I'm thinking well if you had looked at it at 8:00am like you were supose to)

so now I have to wait until they get the part in and call me then take it back to have it installed. on top of everything else that went on yesterday, people just piss me off sometimes.
I feel your pain...
It's like they don't really care about being efficient. Causing you to waste YOUR time keeping them on track. It's no wonder people don't want to take their cars to dealerships!
copper3000 is offline   Reply With Quote
Old 08-24-2011, 03:57 PM   #752
Chevrolet Customer Svc


 
Chevrolet Customer Svc's Avatar
 
Drives: GM Vehicles
Join Date: Jun 2010
Location: Michigan
Posts: 8,825
If you guys need help in getting this resolved just send me your name and phone number and the same for your dealerships and I'll call and what I can to assist. Hopefully this gets you guys squared away.

Jeff Morris, Chevrolet Customer Service
Chevrolet Customer Svc is offline   Reply With Quote
Old 08-24-2011, 05:12 PM   #753
Sir Nuke
Master of All Things
 
Sir Nuke's Avatar
 
Drives: '10 2LT/RS,'14 Caddy CTS Coupe
Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 16,433
Quote:
Originally Posted by Chevrolet Customer Svc View Post
If you guys need help in getting this resolved just send me your name and phone number and the same for your dealerships and I'll call and what I can to assist. Hopefully this gets you guys squared away.

Jeff Morris, Chevrolet Customer Service
JEFF, THANK YOU VERY MUCH!

It NEVER hurts to have someone on the INSIDE having your back.

Thanks Again
__________________
Sir Nuke is offline   Reply With Quote
Old 08-24-2011, 07:27 PM   #754
AUS10BMX

 
AUS10BMX's Avatar
 
Drives: 2010 2LT RY, 2014 Silverado
Join Date: Nov 2009
Location: Greenville, NC
Posts: 1,250
Mine was installed today! It's gotta stay over night to be finished in the morning, speakers blew out when the crack/snap noise occurred from the PDIM flipping out one day.

Will post back tomorrow with the results!
__________________

Hypertech | Airaid | JBA Exhaust | RX Catch Can/CNC TB/Black Ice-Olator | Ported Intake/Heads | 1LE Brembos | F14's | RS Headlights | ZL1 Grille
AUS10BMX is offline   Reply With Quote
Old 08-24-2011, 07:59 PM   #755
i007spectre

 
i007spectre's Avatar
 
Drives: 2014 Camaro 2LT RS
Join Date: Aug 2009
Location: Kansas
Posts: 1,228
What about me Jeff, you ever get ahold of mine. They called and said it was in, but i really am skeptical that its the right one.
__________________
So Far - Airaid
To Come - Corsa cat-back, Yellow interior panels, Subthump kit
i007spectre is offline   Reply With Quote
Old 08-24-2011, 08:31 PM   #756
Sir Nuke
Master of All Things
 
Sir Nuke's Avatar
 
Drives: '10 2LT/RS,'14 Caddy CTS Coupe
Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 16,433
Quote:
Originally Posted by i007spectre View Post
What about me Jeff, you ever get ahold of mine. They called and said it was in, but i really am skeptical that its the right one.
all you need to do to KNOW what version you have and what hardware was installed......do the following:

go to your car and insert a flashdrive or anything into the USB turn the audio system on. it SHOULD look at and verify everything that is curretly attached, such as FM, AM, XM, USB, AND AUX. INPUT. select USB so that its active. THEN push in and hold down the MENU buttom and keep it held down for 8 to 10 seconds and on the display it will have the HW (hardware) and SW (softwear) versions of your PDIM......if you got the LATEST AND GREATEST.....you should have HW: DB SW: DD that is the latest update available.....if the HW version is DB but has anything other than DD your dealer can flash the system to DD. IF they installed a PDIM with a HW version of DA.....they did NOT install the latest and greatest version in your car.
__________________
Sir Nuke is offline   Reply With Quote
Old 08-24-2011, 09:56 PM   #757
Dznyfn
 
Dznyfn's Avatar
 
Drives: 13 1SS Vert, 05 Tahoe Z71, 67 RS/SS
Join Date: Apr 2009
Location: Virginia
Posts: 358
OK, I have been reading all the issues with the dealers and it makes me feel really good about mine now. here is some background info

My bluetooth would randomly drop out and I would be unable to answer a call. Took it to the dealer and "Service writer 1" stated that I needed to leave my phone with them for the day, REALLY? Leave my iphone 4 with all my info? NOT gonna happen.

Went back two weeks later to my normal "service writer 2" and noticed "service writer 1" was no longer there. Explained what was going on with my bluetooth and told him the TSB #. "NO Problem" we will get right on it and new module was ordered after car was diagnosed. I asked what happened with "service writer 1" and he said that he was let go by not truely and completely investigating the customer complaints.

So, from where I stand it may not be the "Dealership" but just the service writer and the owner of the Dealership may not be aware of what is really going on in the service dept. I may be in a unique situation as my family have been friends with the owners for a very long time.
Dznyfn is offline   Reply With Quote
Old 08-25-2011, 12:30 AM   #758
shiftz33
 
shiftz33's Avatar
 
Drives: Camaro SS, SSR, T-Bird, Highlander
Join Date: May 2009
Location: Sacramento
Posts: 330
Quote:
Originally Posted by R&D View Post
Has any anyone had the SW flashed from HW/DB SW/DB to SW/DD by a dealer?
Went to pickup my Camaro after having the AFM lifters replaced. The shop foreman was trying to help me get my HW/DB / SW/DB PDIM updated to SW/DD. After he was able to drill into the configuration/calibrations for the PDIM he found that no newer software download part number was available to download into the PDIM than what it already has installed. He showed me the screen showing the version installed in the PDIM and latest update for the PDIM and they were the same part number.

At this point in time, it appears that a service department cannot update a HW/DB PDIM to SW/DD.

The only way to get SW/DD right now is purchasing the latest/greatest PDIM part number 22797218.
__________________
12 Charger SRT8 | 04 Chevy SSR | 04 Ford Thunderbird PCR #428 | 06 Toyota Highlander Hybrid
shiftz33 is offline   Reply With Quote
Old 08-25-2011, 08:36 AM   #759
cmore
 
cmore's Avatar
 
Drives: 2011 Victory Red Auto 2SS
Join Date: Aug 2010
Location: West Tn
Posts: 629
Quote:
Originally Posted by shiftz33 View Post
Went to pickup my Camaro after having the AFM lifters replaced. The shop foreman was trying to help me get my HW/DB / SW/DB PDIM updated to SW/DD. After he was able to drill into the configuration/calibrations for the PDIM he found that no newer software download part number was available to download into the PDIM than what it already has installed. He showed me the screen showing the version installed in the PDIM and latest update for the PDIM and they were the same part number.

At this point in time, it appears that a service department cannot update a HW/DB PDIM to SW/DD.

The only way to get SW/DD right now is purchasing the latest/greatest PDIM part number 22797218.

U and the dealer need to read PI0055B it covers 2010 and 2011 models and also states they should update the hardware. I had the same issue as have some of the 2010 owners. The PI flatly states that they should update the hardware. I was also told I would have to buy the new PDIM, which was wrong. It took a while but I finally got them to follow it. Hang in there.

PS
By update I meant change out with the newer module.

Last edited by cmore; 08-25-2011 at 08:48 AM. Reason: added PS
cmore is offline   Reply With Quote
Old 08-25-2011, 08:43 AM   #760
AUS10BMX

 
AUS10BMX's Avatar
 
Drives: 2010 2LT RY, 2014 Silverado
Join Date: Nov 2009
Location: Greenville, NC
Posts: 1,250
My dealer said they flashed a few, but they actually took my entire module out and put a new one in, a part number I gave them to order. Then they will program it. I pick the car up today. I didn't want to chance flashing and it not work.
__________________

Hypertech | Airaid | JBA Exhaust | RX Catch Can/CNC TB/Black Ice-Olator | Ported Intake/Heads | 1LE Brembos | F14's | RS Headlights | ZL1 Grille
AUS10BMX is offline   Reply With Quote
Old 08-25-2011, 09:37 AM   #761
shiftz33
 
shiftz33's Avatar
 
Drives: Camaro SS, SSR, T-Bird, Highlander
Join Date: May 2009
Location: Sacramento
Posts: 330
Quote:
Originally Posted by cmore View Post
U and the dealer need to read PI0055B it covers 2010 and 2011 models and also states they should update the hardware. I had the same issue as have some of the 2010 owners. The PI flatly states that they should update the hardware. I was also told I would have to buy the new PDIM, which was wrong. It took a while but I finally got them to follow it. Hang in there.

PS
By update I meant change out with the newer module.
The shop foreman and I had read PI0055B. I was the one that gave the shop foreman a copy of PI0055B. I ALREADY have hardware revision 'DB'. I installed that PDIM (PN 20985421) several months back before PI0055B was available. I purchased it myself and installed it to get hardware revision 'DB'. That's what gave me hardware DB and software DB.

Step 7 of PI0055B states that the PDIM (termed MPIM in this document) should be reprogrammed with the latest calibration. The shop foreman showed me the TIS2WEB screen where it showed the part number of the calibration in my PDIM and what was available via TIS2WEB and there was only one part number (calibration) listed and that was the same one already in the unit.

The fact that I had PI0055B in hand was the only reason he knew/agreed to try and update the PDIM calibration, but there does not appear to be a calibration in TIS2WEB above 'DB' for hardware 'DB'. At least yet.
__________________
12 Charger SRT8 | 04 Chevy SSR | 04 Ford Thunderbird PCR #428 | 06 Toyota Highlander Hybrid
shiftz33 is offline   Reply With Quote
Old 08-25-2011, 09:48 AM   #762
cmore
 
cmore's Avatar
 
Drives: 2011 Victory Red Auto 2SS
Join Date: Aug 2010
Location: West Tn
Posts: 629
I guess the sw update process is behind the documentation process. Wonder why they can not get the newest sw update.
cmore is offline   Reply With Quote
Old 08-25-2011, 09:56 AM   #763
R&D
 
Drives: Sliver SS 2SS RS
Join Date: Aug 2011
Location: Detroit
Posts: 3
Dealer replaced HW=DB SW=DB with 22797218

Quote:
Originally Posted by shiftz33 View Post
Went to pickup my Camaro after having the AFM lifters replaced. The shop foreman was trying to help me get my HW/DB / SW/DB PDIM updated to SW/DD. After he was able to drill into the configuration/calibrations for the PDIM he found that no newer software download part number was available to download into the PDIM than what it already has installed. He showed me the screen showing the version installed in the PDIM and latest update for the PDIM and they were the same part number.

At this point in time, it appears that a service department cannot update a HW/DB PDIM to SW/DD.

The only way to get SW/DD right now is purchasing the latest/greatest PDIM part number 22797218.
The dealer replaced the hardware free under warranty. Now everthing works great. Now at DB=HW and DD=SW But it took going to a second dealer, the first one said that the SW was up to date and there was nothing else they would do.
R&D is offline   Reply With Quote
Old 08-25-2011, 10:03 AM   #764
Chevrolet Customer Svc


 
Chevrolet Customer Svc's Avatar
 
Drives: GM Vehicles
Join Date: Jun 2010
Location: Michigan
Posts: 8,825
spectre, I left my name and phone number for them to call me on Monday and so far not a peep out of them. Is there a number for the dealer at large that I could call to get a hold of them. It's really tough getting a hold of the employee you're working with! Thanks for the kind words Sir Nuke. I'm here to help so anything you guys need I'm here for you.

Jeff Morris, Chevrolet Customer Service
Chevrolet Customer Svc is offline   Reply With Quote
Old 08-25-2011, 10:53 AM   #765
Dogditcher
 
Dogditcher's Avatar
 
Drives: 2011-1LT RS COUPE
Join Date: Aug 2011
Location: Metro Detroit
Posts: 30
Same issue as Shiftz33
Quote:
Originally Posted by shiftz33 View Post
Went to pickup my Camaro after having the AFM lifters replaced. The shop foreman was trying to help me get my HW/DB / SW/DB PDIM updated to SW/DD. After he was able to drill into the configuration/calibrations for the PDIM he found that no newer software download part number was available to download into the PDIM than what it already has installed. He showed me the screen showing the version installed in the PDIM and latest update for the PDIM and they were the same part number.

At this point in time, it appears that a service department cannot update a HW/DB PDIM to SW/DD.

The only way to get SW/DD right now is purchasing the latest/greatest PDIM part number 22797218.
Same problem here -Took to dealer Tuesday for update from HW-DB SW-DB to HW-DB SW-DD .Dealer had car for appx. hour said I was all set drove off lot as usb was indexing 4 minutes into indexing switches to device not found then to last radio setting then back to trying to index USB -the same issue i drove in with -I check USB/menu and still showing old HW-DB. SW-DB .Headed back to dealer grabbed service manager loaded USB and
it displayed indexing but this time it finishes and operates correctly


Tell him sorry for wasting his time and drive off -Problem starts back up and I just head home- So is the update for SW-DB TO SW-DD not really out there and only fix is new module #22797218 that has the update
At this point just going to wait it out till i take in for Oil change hopefully it will be worked out by then-
Dogditcher is offline   Reply With Quote
Old 08-25-2011, 11:16 AM   #766
i007spectre

 
i007spectre's Avatar
 
Drives: 2014 Camaro 2LT RS
Join Date: Aug 2009
Location: Kansas
Posts: 1,228
Like I said Jeff they have me coming in today, they claim they have the right one now. But if it is not I will tell them that they need to listen to your message and get ahold of you.
__________________
So Far - Airaid
To Come - Corsa cat-back, Yellow interior panels, Subthump kit
i007spectre is offline   Reply With Quote
Old 08-25-2011, 12:07 PM   #767
Sir Nuke
Master of All Things
 
Sir Nuke's Avatar
 
Drives: '10 2LT/RS,'14 Caddy CTS Coupe
Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 16,433
GUYS, this is a STRANGE one.....if you saw my last post about going to the dealer yesterday to visit a buddy (#744). ANYWAY, I brought the car in adn dropped if off this morning. I have to ask....do any of you have kids? ya know how when kids have been acting up and not BEHAVING will straighten up when you REALLY lay down the law, or they think or know they are about to get a whipping?? WELL I get in my car and turn it on, and the radio starts to play, and I back out of the garage....then I stop, put it park adn turn it off, open the door to reset everything. I put in my flash drive and start the car up. IT FINDS THE DRIVE!! and starts playing.....I can run thru all the modes and USB it there now!! I even go in and select RANDOM SHUFFLE......let play a little....trun off the car, took they keys out and open the door to reset everything, but left the flash drive in......let it set a few minutes. started up the car.....the system started up, found the USB, started playing WITHOUT REINDEXING and RETAINED the memory of the SHUFFLE!!! In two years it has NEVER EVER done that.....I have HW:CB SW:CC I think the car KEW she was in trouble and like my dog....HATES going to the VET!!! It didn't matter...she is going!!! lol I got to the dealer, they recieved the new PDIM and are installing it. I'll pick her up this afternoon. but didn't BREATHE A WORD about her straightening out.....they are installing the new part! lol
__________________
Sir Nuke is offline   Reply With Quote
Old 08-25-2011, 12:20 PM   #768
Chito
SoCal HT5
 
Chito's Avatar
 
Drives: 2010 Camaro black 2ss/rs
Join Date: Jul 2010
Location: So CAL.
Posts: 1,391
Quote:
Originally Posted by Sir Nuke View Post
GUYS, this is a STRANGE one.....if you saw my last post about going to the dealer yesterday to visit a buddy (#744). ANYWAY, I brought the car in adn dropped if off this morning. I have to ask....do any of you have kids? ya know how when kids have been acting up and not BEHAVING will straighten up when you REALLY lay down the law, or they think or know they are about to get a whipping?? WELL I get in my car and turn it on, and the radio starts to play, and I back out of the garage....then I stop, put it park adn turn it off, open the door to reset everything. I put in my flash drive and start the car up. IT FINDS THE DRIVE!! and starts playing.....I can run thru all the modes and USB it there now!! I even go in and select RANDOM SHUFFLE......let play a little....trun off the car, took they keys out and open the door to reset everything, but left the flash drive in......let it set a few minutes. started up the car.....the system started up, found the USB, started playing WITHOUT REINDEXING and RETAINED the memory of the SHUFFLE!!! In two years it has NEVER EVER done that.....I have HW:CB SW:CC I think the car KEW she was in trouble and like my dog....HATES going to the VET!!! It didn't matter...she is going!!! lol I got to the dealer, they recieved the new PDIM and are installing it. I'll pick her up this afternoon. but didn't BREATHE A WORD about her straightening out.....they are installing the new part! lol

don't you just hate it when that happens. I had the same issues, everytime I will pull into the dealer for service it will work right and the advisor will look at me like I was crazy, but I took the documents from the post here and they changed the part anyways and now its working a lot better, but not 100% yet. so will see.
__________________
Chito is offline   Reply With Quote
Old 08-25-2011, 12:40 PM   #769
Sir Nuke
Master of All Things
 
Sir Nuke's Avatar
 
Drives: '10 2LT/RS,'14 Caddy CTS Coupe
Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 16,433
Quote:
Originally Posted by Chito View Post
don't you just hate it when that happens. I had the same issues, everytime I will pull into the dealer for service it will work right and the advisor will look at me like I was crazy, but I took the documents from the post here and they changed the part anyways and now its working a lot better, but not 100% yet. so will see.
at least when I was there two day ago and the tech looked it just for S and G's it was acting up at its WORST...so they have NO DOUBT its screwed up....

like the saying goes.....if its got wheels or :tweetz: chances are....somewhere down the road its going to give your trouble!!!


__________________
Sir Nuke is offline   Reply With Quote
Old 08-25-2011, 02:54 PM   #770
AUS10BMX

 
AUS10BMX's Avatar
 
Drives: 2010 2LT RY, 2014 Silverado
Join Date: Nov 2009
Location: Greenville, NC
Posts: 1,250
Before and after:



Moisture was in screen so it was replaced with door speakers as well. So far so good... Sounds clearer, and volume is actually loud at 20. I had to get up to 28 before. No crackling or popping so hopefully this is a fix!
__________________

Hypertech | Airaid | JBA Exhaust | RX Catch Can/CNC TB/Black Ice-Olator | Ported Intake/Heads | 1LE Brembos | F14's | RS Headlights | ZL1 Grille
AUS10BMX is offline   Reply With Quote
Old 08-25-2011, 03:22 PM   #771
VaderSS
 
VaderSS's Avatar
 
Drives: 2010 SS/RS 6sp
Join Date: May 2011
Location: Olathe
Posts: 169
Wish my dealer had a friggen clue. Intermittent ipod connectivity issues (wont recognize the ipod). Had the car in for service couple of months ago. Told them about the issue and asked them to check to ensure I had the most recent HW & SW versions. They said I did. Problems continued. Checked versions myself and they were CB & CC!

Brought the car back in for service last week (multiple issues). Told them about the PDIM HW & SW update which should fix my problem. Service writer says, "The usb is controlled through the BCM, not the PDIM". I disagree with him and tell him we need to order the new hardware module before I drop the car off. He refuses. Drop the car off and explain to him that this is a known issue, no reason to wait days to order the new HW...let's save some time here. Nope. Says his tech has access to everything I have been reading about and more (in the most condescending manner possible). Needs his tech to diagnose. I say, "OK, call me back and tell me when you learn that you need to order part #2279721". Calls me the next day. They need to order the new HW module. It's on backorder. No idea when it will arrive.

My two largest local dealers are utterly WORTHLESS!!!
VaderSS is offline   Reply With Quote
Old 08-25-2011, 05:10 PM   #772
cmore
 
cmore's Avatar
 
Drives: 2011 Victory Red Auto 2SS
Join Date: Aug 2010
Location: West Tn
Posts: 629
AUS10BMX, I think DB/DD levels are the current. That means there are newer versions of HW and SW.

VaderSS, mine to. Asked mine how much for a oil/filter change and was told 68+tax. About 2 weeks later and after getting home, noticed they charged 75.38+tax. I think I will try a dealer about 22 miles down the road for anything else I need.

Last edited by cmore; 08-25-2011 at 05:39 PM.
cmore is offline   Reply With Quote
Old 08-25-2011, 05:27 PM   #773
Tiberious
Old '71 Owner
 
Tiberious's Avatar
 
Drives: 11 Camaro Vert;97 Malibu;03 Venture
Join Date: Apr 2010
Location: Tacoma, WA
Posts: 397
Mine goes in to Harnish/Chevrolet of Parkland on Monday for the update, wish me luck.

At least I'll have an oil change while I'm there! These guys seem to do a pretty good job so I'll be surprised if the update isn't done.

Tib
__________________
Peace was my profession...
http://i1041.photobucket.com/albums/b419/tiberious_st/Camaro/CamSig.jpg
Tiberious is offline   Reply With Quote
Old 08-25-2011, 06:34 PM   #774
i007spectre

 
i007spectre's Avatar
 
Drives: 2014 Camaro 2LT RS
Join Date: Aug 2009
Location: Kansas
Posts: 1,228
wrong part again. At least this time they ordered the part number we know is right. Now my issue is that I plugged my zune into a camaro with DB DB. It still had the same issues, so will DB DD majically fix the problem. Or is all this for naught.
__________________
So Far - Airaid
To Come - Corsa cat-back, Yellow interior panels, Subthump kit
i007spectre is offline   Reply With Quote
Old 08-25-2011, 07:20 PM   #775
Sir Nuke
Master of All Things
 
Sir Nuke's Avatar
 
Drives: '10 2LT/RS,'14 Caddy CTS Coupe
Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 16,433
Quote:
Originally Posted by i007spectre View Post
wrong part again. At least this time they ordered the part number we know is right. Now my issue is that I plugged my zune into a camaro with DB DB. It still had the same issues, so will DB DD majically fix the problem. Or is all this for naught.
it COULD be your ZUNE doesn't like your car..... considering Zunes are MICROSOFT and I'm convinced that Mr Gates IS THE DEVIL!!! LOL

i too have a Zune....but its a older model (80 gig) and it works just fine.
__________________

Last edited by Sir Nuke; 08-25-2011 at 10:57 PM.
Sir Nuke is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Audio/Bluetooth/PDIM FAQ UCF w00t Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum 128 12-11-2014 12:58 AM
How many people will E-85 their new camaro? Speed74SS Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 57 01-03-2011 03:16 PM
* * * OnStar iPhone application - UPDATE * * * CamaroScotty 5th Gen Camaro SS LS LT General Discussions 142 08-12-2010 12:13 AM
Tire Monitoring System monevz28 Camaro Issues / Problems | Warranty Discussions | TSB and Recalls 7 11-22-2009 04:42 PM


All times are GMT -5. The time now is 04:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.