|09-16-2014, 01:27 PM||#1|
On 8/04/13 I purchased a 2013 IOM 2LS with 50 miles on her. My goal is to ultimately have the fastest street legal 5th gen v6 on the East Coast and break into the single digits.
301 Garage (formally Carrera Auto, however, my paint and body guys left) in College Park, Maryland for paint and body work.
JE Import Performance in Baltimore, Maryland for performance; built the first and only mid-mounted twin turbo setup for a LFX that is gravity drained.
2/8/16 - JacFab LFX Ported Intake Manifold
2/8/16 - Overkill 80mm Throttle Body
3/30/16 - Twin Turbos GTX2863R
2/8/16 - ZL1 Fuel Pump w/Control Module
Suspension & Handling Modifications:
Weight Reduction - 156.8 lbs
8/15/15 - SS Brembo Four-piston fixed Brembo calipers
10/8/15 - Lingenfelter Supercar Drag Coilovers
4/18/14 - Locking fuel door- color matched
11/7/14 - VIS Ams Carbon Fiber Hood
11/20/14 - Flow-Tie Conversion
5/20/15 - Carbon Creations Z carbon Fiber Spoiler
6/19/15 - ZL1 front conversion
6/25/15 - Debadged CAMARO
7/30/15 - Factory Reproductions 41 ZL Wheels
- Fronts - 18x8 - NT555
- Rears - 18x11 - NT0R
10/2/15 - RPI Taillight Bezels - Inferno Orange
12/2/15 - ZL1 Rear Diffuser Conversion
6/23/14 - Interior kit- Inferno Orange
10/8/15 - Custom Painted Interior
- Speedo Bezel
- Heating Vents Bezel
- Center Console
- Shifting Plate
- Steering wheel trim
11/19/15 - Shrader Performance Rear Seat Delete (-30lbs)
1/14/15 - RPI Door & Dash Trim - Inferno Orange
Last edited by djcolopi; 04-22-2016 at 09:57 PM. Reason: update
|09-16-2014, 01:33 PM||#2|
SoCal HT5 COTW 4/21/13
Drives: 2011 SS/RS Blown & Cammed LS3
Join Date: Sep 2011
Location: Sandy Eggo
looking forward to seeing this build continue and come together
|11-08-2014, 02:12 PM||#4|
For my 23rd birthday my girlfriend blindfolded me at our body shop. After the blindfolds were taken off I was surprised with my new hood; the VIS Ams Carbon Fiber Hood
Last edited by djcolopi; 11-28-2014 at 11:07 AM. Reason: edited attachment
|11-28-2014, 11:05 AM||#5|
I recently dropped my car off to the shop to have them install the hood pins, clear coat the carbon fiber and convert my bowtie emblem into a flowtie.
Last edited by djcolopi; 11-28-2014 at 11:06 AM. Reason: added attachment
|05-26-2015, 10:27 AM||#8|
Drives: 2015 2SS 1LE
Join Date: Apr 2013
Location: Miami WADE County
Nice I can't wait to see the numbers and the total gains your car will gain.
2015 Camaro 2SS 1LE 6.2L V8- Dream Car
2015 Equinox 2.4L I4- (Married Man with a kid ^__^)
2013 Camaro 1LS 3.6L V6 - Traded
1995 Toyota Pickup 2.4L I4- Sold
1985 Mazda Rx-7 1.8L (Red) - Total Loss
1985 Mazda Rx-7 Turbo 1.8L Rotary ( White)- Sold
1996 Honda Accord 2.7L V6 - Wrecked
1998 Dodge Intrepid POS Engine- Lemon
|06-20-2015, 05:35 PM||#9|
Still working with JE on the twin turbo build......however, in the mean time I had Carrera Auto in College Park, MD install my ZL1 front conversion with a tow hook (black; stealth mode). She is a new Beast and looks badass now!
|07-30-2015, 05:28 PM||#10|
Just picked up Inferno from carrera auto with new wheels wrapped with some nitto tires.
I had them install Factory reproductions style 41 ZL wheels based off the ZL1 wheels however, in drag spec and wrap them with sticky performance tires.
Fronts - 18x8 wrapped with NT555
Rears - 18x11 wrapped with NT05R
And update on the turbo build............all the parts are in and im blocked off to drop her off August 17th. Waiting impatiently to turn on the boost
|07-30-2015, 09:17 PM||#13|
Drives: 2012 1SS M6 Inferno Orange
Join Date: Dec 2012
Location: New Rochelle New York
I would love to see better shots of the full car with the new rims on.
Iv been playing with the idea of this same set to.
2012 1SS Camaro LS3 Inferno Orange
Mods: Custom Grind Cam Stage 2 By JTM, Long Tube ARH 1 7/8, ARH High Flow Cats, 3' Cat Back Magnaflow Exhaust, AEM Cold Air Intake, Elite Catch Can V2, BO White S2 TB, GM 3.91 Gears, DDS CF Drive Shaft, Hotchkis TVS Track Pack kit. Tuned by JTM Motorsports 445 Hp 410Tq
LSA Supercharger, ADM Supercharger kit, Axles, Monster Clutch, Squash Fuel System, BMR Bushing Kit.... For 2016.
|08-01-2015, 02:24 PM||#14|