Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Bigwormgraphix
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Camaro DIY & HOW-TO instructions & discussions

Camaro DIY & HOW-TO instructions & discussions All DIY projects & discussions

Reply
 
Thread Tools
Old 02-24-2011, 04:38 PM   #26
BlkThndr66
I'm not car-ist
 
BlkThndr66's Avatar
 
Drives: '10 RY 2LT Camaro '96 Mustang Cobra
Join Date: Dec 2010
Location: Chicagoland
Posts: 227


I really wanna know how to change my blue to yellow.

Alright, tons of research later, I figured it out. So Cheap and easy, gotta do it tonight or tomorrow for sure. I will track my progress. I don't know of anyone else with yellow ABL!
__________________
35% tint, faded gill stripes, yellow stitching, black spoiler, decklid stripes
To-Do List:
Oracle HALO multicolor headlight + fogs kit; Bumblebee striping kit; Flowmaster 3-chamber cat-back; Roto-Fab Intake.
Team LLT-M6

Last edited by BlkThndr66; 02-24-2011 at 04:58 PM.
BlkThndr66 is offline   Reply With Quote
Old 03-23-2011, 09:24 PM   #27
A9AL8R
 
A9AL8R's Avatar
 
Drives: IBM 2LT W/CGM Stripes
Join Date: Jan 2011
Location: The Woodlands,TX
Posts: 88
does anybody know the size of the resistor for the doors?
__________________
A9AL8R is offline   Reply With Quote
Old 03-23-2011, 09:37 PM   #28
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 11,625
1/4 watt but that is not the ohms, that is by the LED you use.
__________________
2SSRS@Gen5diy is offline   Reply With Quote
Old 05-28-2011, 08:23 PM   #29
whippetrun
 
whippetrun's Avatar
 
Drives: 2011 2SS Synergy Green / 2006 Sol.
Join Date: Jan 2011
Location: Jersey
Posts: 41
Quote:
Originally Posted by 2SSRS View Post
You need to remove the door panels of the car,
http://www.camaro5.com/forums/showpo...9&postcount=29
http://www.camaro5.com/forums/showpo...0&postcount=30



No that is it the one's behind the gauges are a lot more work, Here is a pic from a old thread that rharon started.

Geez! that's a lot different than my '69 Firebird!
Jim
__________________
whippetrun is offline   Reply With Quote
Old 05-28-2011, 08:25 PM   #30
whippetrun
 
whippetrun's Avatar
 
Drives: 2011 2SS Synergy Green / 2006 Sol.
Join Date: Jan 2011
Location: Jersey
Posts: 41
Well I am going to be Lazy.. I am too old and too busy at work (paying for this car) to try this myself.. anyone in NJ who does this?
If so let me know, I need Lime Green
Message me
Jim
__________________
whippetrun is offline   Reply With Quote
Old 05-28-2011, 08:46 PM   #31
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 11,625
For what part of the car?
__________________
2SSRS@Gen5diy is offline   Reply With Quote
Old 05-28-2011, 10:28 PM   #32
anglwngss
Treasurer LoneStarCamaro
 
anglwngss's Avatar
 
Drives: 2011 Synergy Green 2SS/RS
Join Date: Oct 2010
Location: Venus, Tx
Posts: 1,632
I'm so gonna pull out that dash circuit board one of these days.. Anyone know how difficult it is to get to?
__________________

Questions about Lone Star Camaro? Email me: Treasurer@LoneStarCamaro.com
anglwngss is offline   Reply With Quote
Old 05-28-2011, 10:34 PM   #33
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 11,625
No harder then the 4 pack gauges.
__________________
2SSRS@Gen5diy is offline   Reply With Quote
Old 05-28-2011, 11:07 PM   #34
The IOM Ninja
Account Suspended
 
Drives: 10' IOM 2SS/RS, 13' GB Shelby GT500
Join Date: Sep 2010
Location: Sherwood Park, AB
Posts: 2,195
Quote:
Originally Posted by 2SSRS View Post
No harder then the 4 pack gauges.
Speaking of 4 Pack Gauges, does anyone else that has installed the HUD have a problem with the cigarette lighter on it or am I wrong that it is even able to provide power to charge or etc.
The IOM Ninja is offline   Reply With Quote
Old 08-18-2011, 11:51 AM   #35
Hired Gun
Wild Man
 
Hired Gun's Avatar
 
Drives: 2010 Camaro
Join Date: Sep 2010
Location: Milford, Ky
Posts: 560
Ok I am wanting to do this in the winter. I am going to change my interior accents from silver to white. I want to also change my abl to a nice blue led like what I bought from Ivan. I would also like to have it run across the dash.

Now just within the past few months I found that AAC has a dealer in Richmond,Kentucky. Would they be able to do this mod for me? Or is this something I need to go someplace else to have done? I just do not trust myself with soldering things.
__________________
2010 Camaro Black with White Stripes, Jannetty Racing Roto-Fab CAI, VMAX Ported Throttle Body, Long Tube Headers, GMPP Axel Back, Emblem Pros Custom "VOODOO" Under hood Bow tie, Chrome Gill Inserts, HUD plate, Sparks Performance White SS front and rear Plate MPD-1 Spoiler
Hired Gun is offline   Reply With Quote
Old 09-18-2011, 08:23 PM   #36
Tysen


 
Tysen's Avatar
 
Drives: 2011 RJT 2SS/RS M6
Join Date: Oct 2009
Location: TN
Posts: 2,345
I just did my passenger door. Looks good but the red is way too dim. Is there another LED I should get to increase the output?

I used a 5mm LED from Radio Shack (2.6 volt, 28mA, 10mcd) and 1k-Ohm Resistors (1/4 watt, 5% tolerance). I just noticed there's a Resistor color code on the back that says First and Second color, Red = 2. Not sure what this means, I'm new to the LED world, lol. Any help would be appreciated.
__________________
"I'm a man who discovered the wheel, and built the Eiffel Tower out of metal and brawn! That's what kind of man I am." - Ron Burgundy
My build thread
Tysen is offline   Reply With Quote
Old 09-19-2011, 09:29 AM   #37
wylde1
I am the Stig
 
wylde1's Avatar
 
Drives: Black w/ IOM stripe 1SS
Join Date: Jan 2010
Location: Saskatoon, SK, CAN
Posts: 1,312
Quote:
Originally Posted by Tysen View Post
I just did my passenger door. Looks good but the red is way too dim. Is there another LED I should get to increase the output?

I used a 5mm LED from Radio Shack (2.6 volt, 28mA, 10mcd) and 1k-Ohm Resistors (1/4 watt, 5% tolerance). I just noticed there's a Resistor color code on the back that says First and Second color, Red = 2. Not sure what this means, I'm new to the LED world, lol. Any help would be appreciated.
If you use a slightly smaller resistor the LED will be brighter. Try a 500ohm or even a 750.
__________________
2010 Camaro - 1SS, Black w/ Orange stripes
wylde1 is offline   Reply With Quote
Old 09-19-2011, 12:53 PM   #38
Tysen


 
Tysen's Avatar
 
Drives: 2011 RJT 2SS/RS M6
Join Date: Oct 2009
Location: TN
Posts: 2,345
so the smaller the ohms the brighter the LED?
__________________
"I'm a man who discovered the wheel, and built the Eiffel Tower out of metal and brawn! That's what kind of man I am." - Ron Burgundy
My build thread
Tysen is offline   Reply With Quote
Old 09-19-2011, 01:05 PM   #39
wylde1
I am the Stig
 
wylde1's Avatar
 
Drives: Black w/ IOM stripe 1SS
Join Date: Jan 2010
Location: Saskatoon, SK, CAN
Posts: 1,312
That's correct but there is a risk of burning out your LED. Less resistance allows more current through, which makes the light brighter. Your running it "harder" though so it MAY bring down the lifetime a little. It's ok to experiment with varied resistances though, you won't hurt anything but the LED which is like 50 cents. I'm not sure which LED's you've got but I typically use ones rated at 5-10 mA and run them up to 15 mA with little to no issue. Just remember V=I*R and you can pick a resistor to run a desired current and you won't have to guess and re- solder a whole bunch.
__________________
2010 Camaro - 1SS, Black w/ Orange stripes
wylde1 is offline   Reply With Quote
Old 09-19-2011, 01:30 PM   #40
2SSRS@Gen5diy
Salt & Pepper 2014 Z/28

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 11,625
That is why you dont buy at Radio Shack, You are using the right resistor for that LED but you need a better one then that, Have you tried from any one other then Radio Shack
__________________
2SSRS@Gen5diy is offline   Reply With Quote
Old 09-19-2011, 01:36 PM   #41
Tysen


 
Tysen's Avatar
 
Drives: 2011 RJT 2SS/RS M6
Join Date: Oct 2009
Location: TN
Posts: 2,345
Are there any other local shops that may carry stuff like this? Or should I just order off a website? I'm impatient when it comes to mods, so I tend to go for anything local where I don't have to wait for shipping.
__________________
"I'm a man who discovered the wheel, and built the Eiffel Tower out of metal and brawn! That's what kind of man I am." - Ron Burgundy
My build thread
Tysen is offline   Reply With Quote
Old 09-19-2011, 01:38 PM   #42
Tysen


 
Tysen's Avatar
 
Drives: 2011 RJT 2SS/RS M6
Join Date: Oct 2009
Location: TN
Posts: 2,345
Quote:
Originally Posted by 2SSRS View Post
That is why you dont buy at Radio Shack, You are using the right resistor for that LED but you need a better one then that, Have you tried from any one other then Radio Shack
I need a better resistor or a better LED? Thanks for the help guys, I really appreciate it.
__________________
"I'm a man who discovered the wheel, and built the Eiffel Tower out of metal and brawn! That's what kind of man I am." - Ron Burgundy
My build thread
Tysen is offline   Reply With Quote
Old 09-19-2011, 02:16 PM   #43
wylde1
I am the Stig
 
wylde1's Avatar
 
Drives: Black w/ IOM stripe 1SS
Join Date: Jan 2010
Location: Saskatoon, SK, CAN
Posts: 1,312
Sometimes the LED quality makes a difference. There's many different types as well, but really even if you have the cheap ones, just feed them more current and they'll brighten up. Even if you burn 'em up to find the limit you're only out a few cents and you can just dial it back a touch.

Try a 750 Ohm resistor, you'll be pushing about 18 mA though it when your at max voltage (13.5 V ish) That should be lots. If it's still dim after that maybe try a new LED.
__________________
2010 Camaro - 1SS, Black w/ Orange stripes
wylde1 is offline   Reply With Quote
Old 09-19-2011, 03:12 PM   #44
Tysen


 
Tysen's Avatar
 
Drives: 2011 RJT 2SS/RS M6
Join Date: Oct 2009
Location: TN
Posts: 2,345
Cool, thanks again. I'll rip the door panels off when I get home.
__________________
"I'm a man who discovered the wheel, and built the Eiffel Tower out of metal and brawn! That's what kind of man I am." - Ron Burgundy
My build thread
Tysen is offline   Reply With Quote
Old 09-19-2011, 07:50 PM   #45
Tysen


 
Tysen's Avatar
 
Drives: 2011 RJT 2SS/RS M6
Join Date: Oct 2009
Location: TN
Posts: 2,345
Ok, just changed out the resistor in the passenger door with a 470-ohm resistor, and wired the driver door with the stock resistor. Both lights are the same intensity, and they look great. Thanks again for the help guys.

I searched around on the forums but can't find a thread on how to change the power window buttons' colors. Anyone know if it's possible? I think I remember reading about it.
__________________
"I'm a man who discovered the wheel, and built the Eiffel Tower out of metal and brawn! That's what kind of man I am." - Ron Burgundy
My build thread
Tysen is offline   Reply With Quote
Old 10-05-2011, 01:03 PM   #46
shadowghost21
 
Drives: 2011 Grey 2LT Camaro
Join Date: Jul 2011
Location: Colorado
Posts: 30
To expand on this a bit further, since it looks like it's only one led per door. I was going to wire up an Arduino and multicolor leds and then you can change it to what ever color you want. Should be easy if I have the time, and I'll drop a new write up on here if I get the time.

Does anyone know where I can get just the lighting unit so I can keep a stock one laying around?
shadowghost21 is offline   Reply With Quote
Old 04-05-2012, 01:29 PM   #47
jjzummo
 
Drives: 2011 Automatic V6 RS Camaro
Join Date: Feb 2012
Location: Chicago
Posts: 3
What is the max size LED the factory holder will allow?

Is the max 5mm? What size is the factory aqua blue led? What type of resistor would I need if I used a 3mm rainbow or a 10mm rainbow led which can be purchased btw from Chaney Electronics online. Forget radioshack!

-Justin
jjzummo is offline   Reply With Quote
Old 04-05-2012, 01:38 PM   #48
MARINE1991


 
MARINE1991's Avatar
 
Drives: COTW 8/29/11 2010 CAMARO
Join Date: Jul 2009
Location: hickville NC USA
Posts: 9,922
Quote:
Originally Posted by The IOM Ninja View Post
Speaking of 4 Pack Gauges, does anyone else that has installed the HUD have a problem with the cigarette lighter on it or am I wrong that it is even able to provide power to charge or etc.
ummm yea forgot about it, couldnt understand why mine stopped working... woundering if that had somthing to do with it....
MARINE1991 is offline   Reply With Quote
Old 04-05-2012, 06:30 PM   #49
Mr_Draco


 
Mr_Draco's Avatar
 
Drives: 2SS/RS
Join Date: Sep 2008
Location: Western North Carolina
Posts: 6,284
Can someone with better eyes then mine please help me see what those colors are on the resister? It looks like white, brown, brown, gold. If so then it's a 910 ohm resister.

I have the yellow trim kit and I'm getting tired of the green lights. I wonder if a white led will make it glow yellow.
Mr_Draco is offline   Reply With Quote
Old 07-29-2012, 07:45 PM   #50
monstertodd


 
monstertodd's Avatar
 
Drives: 2010 Cyber Grey Metallic 2SS/RS M6
Join Date: Nov 2009
Location: Tega Cay, South Carolina
Posts: 3,971
I'd like to do this mod as well. Anyone have a good source for 5mm leds?
__________________
monstertodd is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to Wire Footwell Lighting TonyNo Camaro DIY & HOW-TO instructions & discussions 750 08-20-2014 07:43 PM
Colors on Camaro you like...vs colors you hate...and a vote for ugliest color..hehe chevydude26 5th Gen Camaro SS LS LT General Discussions 15 05-26-2010 09:00 PM
DIY: ABL Color Change Tecca Camaro DIY & HOW-TO instructions & discussions 20 05-18-2010 06:50 PM
hmm I think I am changing colors again TaylorRyanSS 5th Gen Camaro SS LS LT General Discussions 19 05-21-2009 10:21 PM
Coolest new car colors KILLER74Z28 General Automotive + Other Cars Discussion 8 04-12-2007 08:24 AM


All times are GMT -5. The time now is 06:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.