Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Nickey Chicago
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V6

Forced Induction - V6 V6 Supercharger, turbo, nitrous discussions

Reply
 
Thread Tools
Old 11-16-2010, 06:05 PM   #1
ROD1
Back to the hunt....
 
ROD1's Avatar
 
Drives: 2010 Camaro RS V6 #1301 DOB 3/23/09
Join Date: Aug 2009
Location: Ithaca NY
Posts: 2,561
Zex treatment.

A few of us got the 1/4" fuel T in our kits instead of the 3/8" so I finally decided to contact zex to get the right size in case it was screwin with my fuel pressure. Here is how the emails went after I contacted them.

Rod,
That kit should have included a 3/8 inline fuel tee fitting. That fitting is
not undersized and there should be no problem with the fuel pressure.
Thank you,
Austin Green

Its not a 3/8 it is smaller than that but thanks anyways. I will convey your answer on the forums though. Thank you, ROD1 Camaro5.com

Well, if you don’t believe it is the 3/8 fitting which should have come with that system, you’re more than welcome to send the fitting in for us to inspect.
Thank you,
Austin Green

Lol, I think i can measure but thanks just the same lol "Rod"

Alright. Just let us know if you need anything else.
Thank you and have a nice day,
Austin Green

Yeah you too. No wonder NX and the rest are kickin ur ass. "Rod"

_________________
"I have been dismissed" I will never buy a F&c*!n thing from comp cams or zex again.
ROD1 is offline   Reply With Quote
Old 11-16-2010, 06:23 PM   #2
GretchenGotGrowl


 
GretchenGotGrowl's Avatar
 
Drives: `12 LFX/`11 EB F-150/`13 Sonic RS
Join Date: Sep 2010
Location: Little Rock, AR
Posts: 5,333
WOW! How much could the T cost? If would have been me I would have sent it to you and not even asked for a return of the old.

Can you post a photo of the one you got? I'll be down at Polk Performance on Thursday and maybe they have one laying round.
__________________
EFR Twin Turbo LFX-GPI Tune-ZL1 fuel pump-10:1 CR forged pistons-3.45 gear-Meth Injection-BMR Trailing Arms, Bushings & Sway Bars-CircleD 4000 Stall-GPI Fuel Enrichment System
647 RWHP & 726 RWTQ @18.5 psi on 93 Octane (locked converter)
1/8 mile -- 7.158 @ 102.10 (20psi); old build
Build Thread
GretchenGotGrowl is online now   Reply With Quote
Old 11-16-2010, 07:19 PM   #3
ROD1
Back to the hunt....
 
ROD1's Avatar
 
Drives: 2010 Camaro RS V6 #1301 DOB 3/23/09
Join Date: Aug 2009
Location: Ithaca NY
Posts: 2,561
Quote:
Originally Posted by GretchenGotGrowl View Post
WOW! How much could the T cost? If would have been me I would have sent it to you and not even asked for a return of the old.
Can you post a photo of the one you got? I'll be down at Polk Performance on Thursday and maybe they have one laying round.
Naw thats OK. They are dirt cheap, Ill pick on up but thanks.
I will post a pic when I remove it.
ROD1 is offline   Reply With Quote
Old 11-16-2010, 08:03 PM   #4
GretchenGotGrowl


 
GretchenGotGrowl's Avatar
 
Drives: `12 LFX/`11 EB F-150/`13 Sonic RS
Join Date: Sep 2010
Location: Little Rock, AR
Posts: 5,333
Quote:
Originally Posted by ROD1 View Post
Naw thats OK. They are dirt cheap, Ill pick on up but thanks.
I will post a pic when I remove it.
Cool. Thought it might be something special.
__________________
EFR Twin Turbo LFX-GPI Tune-ZL1 fuel pump-10:1 CR forged pistons-3.45 gear-Meth Injection-BMR Trailing Arms, Bushings & Sway Bars-CircleD 4000 Stall-GPI Fuel Enrichment System
647 RWHP & 726 RWTQ @18.5 psi on 93 Octane (locked converter)
1/8 mile -- 7.158 @ 102.10 (20psi); old build
Build Thread
GretchenGotGrowl is online now   Reply With Quote
Old 11-17-2010, 01:38 AM   #5
SIXJAK


 
SIXJAK's Avatar
 
Drives: MO's only SC'd LLT.
Join Date: Feb 2010
Location: Branson MO
Posts: 2,557
Quote:
Originally Posted by ROD1 View Post
A few of us got the 1/4" fuel T in our kits instead of the 3/8" so I finally decided to contact zex to get the right size in case it was screwin with my fuel pressure. Here is how the emails went after I contacted them.

Rod,
That kit should have included a 3/8 inline fuel tee fitting. That fitting is
not undersized and there should be no problem with the fuel pressure.
Thank you,
Austin Green

Its not a 3/8 it is smaller than that but thanks anyways. I will convey your answer on the forums though. Thank you, ROD1 Camaro5.com

Well, if you don’t believe it is the 3/8 fitting which should have come with that system, you’re more than welcome to send the fitting in for us to inspect.
Thank you,
Austin Green

Lol, I think i can measure but thanks just the same lol "Rod"

Alright. Just let us know if you need anything else.
Thank you and have a nice day,
Austin Green

Yeah you too. No wonder NX and the rest are kickin ur ass. "Rod"

_________________
"I have been dismissed" I will never buy a F&c*!n thing from comp cams or zex again.
It just never pays to be smug with a customer. DISH did the same kind of thing to me after they screwed me out of 400.00 so as I promised the supervisor 6 years ago, I go out of my way to tell everyone that they suck for the rest of my life. This after I told him to enjoy their 400.00.

Power to the PEEPS!!!!!
__________________
IPF supercharger kit, IPF tune, SW LT's, R. Tech HFC's, ARK DT-S catback, SS Brembo brake upgrade, BC Racing adjustable coilovers, Hurst STS, Pfadt rear arm package, Pfadt adjustable sways & end links, Pfadt diff bushings, BMR rear cradle full kit blk bezels,SS diffuser, Innovate gauges.
SIXJAK is offline   Reply With Quote
Old 11-17-2010, 07:20 AM   #6
scrming
Red Brick of Vengeance!
 
scrming's Avatar
 
Drives: 12 Second Brick
Join Date: Jun 2009
Location: at my pulpit
Posts: 7,720
Like my Zex... but yes, their first level customer support sucks... Basically I ranted until they put the manager on the line... got his direct number and things were fine after that...
scrming is offline   Reply With Quote
Old 11-17-2010, 08:06 AM   #7
HDRS
Fastest V6
 
HDRS's Avatar
 
Drives: 2010 CGM 2LT/RS 06 G6 GTP conv.
Join Date: Mar 2010
Location: Bensalem PA
Posts: 312
Hey Rod that sucks but I have to say the two times I contacted Zex I received good customer service. However you are right the fitting is too small for the fuel line they provide that is one of the reasons I ran my line to the Schrader valve.
I would recommend that you send them a picture to prove your point.
__________________
1/4 Mile 11.841 at 113.98mph
SEPA5 /TEAM LLT
HDRS is offline   Reply With Quote
Old 01-29-2011, 08:38 AM   #8
DAL123
 
DAL123's Avatar
 
Drives: 2010 Camaro 2LT/RS/A6
Join Date: Aug 2009
Location: New Bedford, Mass.
Posts: 102
testing
__________________
Trifecta Tune, Vararam CAI,Self ported Intake Manifold,3/8 Black Iceolator,Rx Catch Can, W/Breather, V8 Rear Diff. 3:45s W/Posi Mod, Mrt V2.0 Axel Back, Magnaflow Resonated X-pipe, Street Scene Front Splitter.,V-Max Trottle Body., Eiback Sway Bars., Phadt End Links.,
DAL123 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Zex bought out by Competition cams? ROD1 Forced Induction - V6 11 07-14-2010 11:00 AM
Anyone installed the ZEX Kit? Germann Forced Induction - V6 10 02-21-2010 12:16 PM
V6 Camaro Owners! 2010 V6 Zex Nitrous System now available! Kris@BMCPerformance Forced Induction 3 01-23-2010 02:41 PM
ZEX Installation Instructions tbyrne Forced Induction - V8 0 09-26-2009 02:03 PM
New Zex 2010 Camaro V6 Nitrous Kit - intro and free shipping @ PFYC.com Redshift Forced Induction 0 07-16-2009 08:31 AM


All times are GMT -5. The time now is 12:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.