Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
JDP Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro Photos | Spyshots | Video | Media Gallery

Camaro Photos | Spyshots | Video | Media Gallery All Camaro related pictures, videos and other assorted media.

Reply
 
Thread Tools
Old 05-07-2011, 06:03 PM   #1
cfcoates
 
Drives: 2010 Camaro CGM 2SS/RS
Join Date: Aug 2009
Location: US
Posts: 136
New Havoc Diffuser/Rockers and Stillen Splitter

I just finished installing Havoc side skirts and rear diffuser... Also replaced my ACS splitter with the Stillen splitter. I prefer the design of the ACS, but it hangs very low and has taken quite a beating over the last year. I have needed to remove it for repaint and repairs a couple different times and decided a urethane splitter would handle the terrible roads much better.

I painted the Havoc pieces matte black and left the Stillen splitter as bare urethane since it seemed to match quite nicely. The install was very simple, but I would recommend replacing the supplied tape that comes with these kits with something thicker.

I also added a pic of the KB 2.8 that was installed and dyno tuned by TPE.













__________________

Kenne Bell 2.8 Polished & Black - Coolingmist Methanol Injection
Stillen Front Splitter - Havoc Side Skirts & Rear Diffuser
ICONZ Wheels & Nitto NT-05's - PFADT Springs
cfcoates is offline   Reply With Quote
Old 05-07-2011, 06:20 PM   #2
thespymaster


 
thespymaster's Avatar
 
Drives: C7 / ZL1 / SS / trucsk
Join Date: Nov 2009
Location: G4 CLASSIFIED
Posts: 4,639
Very nice, perfect combo of mods

Post a video, so we can hear it purr...............
__________________
2014 C7 Stingray 3LT/Z51
2013 Camaro SS
2012 Camaro ZL1 - 850 HP
2015 GMC Denali 3500HD 4x4
2012 GMC Sierra 3500HD 4x4
thespymaster is offline   Reply With Quote
Old 05-07-2011, 07:17 PM   #3
cfcoates
 
Drives: 2010 Camaro CGM 2SS/RS
Join Date: Aug 2009
Location: US
Posts: 136
On the dyno at TPE

__________________

Kenne Bell 2.8 Polished & Black - Coolingmist Methanol Injection
Stillen Front Splitter - Havoc Side Skirts & Rear Diffuser
ICONZ Wheels & Nitto NT-05's - PFADT Springs
cfcoates is offline   Reply With Quote
Old 05-07-2011, 07:19 PM   #4
thespymaster


 
thespymaster's Avatar
 
Drives: C7 / ZL1 / SS / trucsk
Join Date: Nov 2009
Location: G4 CLASSIFIED
Posts: 4,639
Quote:
Originally Posted by cfcoates View Post
On the dyno at TPE

So it growls instead of purrs..................

Have ya run the 1/4 mile with it, yet? time?
__________________
2014 C7 Stingray 3LT/Z51
2013 Camaro SS
2012 Camaro ZL1 - 850 HP
2015 GMC Denali 3500HD 4x4
2012 GMC Sierra 3500HD 4x4
thespymaster is offline   Reply With Quote
Old 05-07-2011, 07:27 PM   #5
cfcoates
 
Drives: 2010 Camaro CGM 2SS/RS
Join Date: Aug 2009
Location: US
Posts: 136
Quote:
Originally Posted by thespymaster View Post
So it growls instead of purrs..................

Have ya run the 1/4 mile with it, yet? time?

No 1/4 mile runs yet... I'm more interested in getting on the 2.5 mile road course that is just a few hours away.
__________________

Kenne Bell 2.8 Polished & Black - Coolingmist Methanol Injection
Stillen Front Splitter - Havoc Side Skirts & Rear Diffuser
ICONZ Wheels & Nitto NT-05's - PFADT Springs
cfcoates is offline   Reply With Quote
Old 05-07-2011, 07:40 PM   #6
Kinetic Kev HWSE 2013

 
Kinetic Kev HWSE 2013's Avatar
 
Drives: 2013 Hot Wheels Special Edition
Join Date: May 2009
Location: Auburn,Mass
Posts: 1,338
Sounds and looks good man
Kinetic Kev HWSE 2013 is offline   Reply With Quote
Old 05-07-2011, 08:08 PM   #7
GreenMonster
Its all about the U
 
GreenMonster's Avatar
 
Drives: 2010 SGM
Join Date: Mar 2010
Location: Miami
Posts: 1,676
Looks great more pics of the rear diff would be appreciated..
__________________
GreenMonster is offline   Reply With Quote
Old 05-07-2011, 08:09 PM   #8
Atlas
Would you kindly...
 
Atlas's Avatar
 
Drives: Destitute
Join Date: Aug 2010
Location: Clovis CA
Posts: 758
Your Camaro looks wicked! Loving the setup.
__________________
Atlas is offline   Reply With Quote
Old 05-07-2011, 08:25 PM   #9
BrandonB956
 
BrandonB956's Avatar
 
Drives: RS (11/15/10)
Join Date: Mar 2010
Location: Baton Rouge,LA
Posts: 577
I like what you did , I plan on having the same splitter and diffuser Down the road .

Also like the blue SS badge
__________________
TEAM LLT

Nov.15th 2010 -- Check out my build thread
http://www.camaro5.com/forums/showthread.php?t=116235
BrandonB956 is offline   Reply With Quote
Old 05-08-2011, 08:21 PM   #10
cfcoates
 
Drives: 2010 Camaro CGM 2SS/RS
Join Date: Aug 2009
Location: US
Posts: 136
Quote:
Originally Posted by GreenMonster View Post
Looks great more pics of the rear diff would be appreciated..


__________________

Kenne Bell 2.8 Polished & Black - Coolingmist Methanol Injection
Stillen Front Splitter - Havoc Side Skirts & Rear Diffuser
ICONZ Wheels & Nitto NT-05's - PFADT Springs
cfcoates is offline   Reply With Quote
Old 05-08-2011, 08:39 PM   #11
TaylorRyanSS
COTW: 12/13/10
 
TaylorRyanSS's Avatar
 
Drives: 1969 Camaro, 2012 370Z
Join Date: Feb 2008
Location: Orange County, CA
Posts: 7,916
Thanks for posting this! I am going to do the havok side skirts and stillen carbon fiber splitter soon. Looks good!
__________________

"Are you one of those boys who prefer cars to women? - I'm one of those boys that appreciates a fine body, regardless of the make."
1969 CAMARO JOURNAL: http://www.camaro5.com/forums/showthread.php?t=341239 | FACEBOOK: http://www.facebook.com/taylor.ryan.apt | GRAPHIC DESIGN: www.aptdesigns.net
TaylorRyanSS is offline   Reply With Quote
Old 05-08-2011, 09:44 PM   #12
ajp
Imperial Blue Steel
 
ajp's Avatar
 
Drives: Camaro 2010 2SS/RS
Join Date: Jul 2009
Location: AZ
Posts: 1,657
Nice set up - I have the exact setup except I still have the ACS splitter (which I had repaired a few weeks back).

Hoping to replace mine with either the SLP or Rev splitter.
ajp is online now   Reply With Quote
Old 05-08-2011, 10:27 PM   #13
cfcoates
 
Drives: 2010 Camaro CGM 2SS/RS
Join Date: Aug 2009
Location: US
Posts: 136
Quote:
Originally Posted by ajp View Post
Nice set up - I have the exact setup except I still have the ACS splitter (which I had repaired a few weeks back).

Hoping to replace mine with either the SLP or Rev splitter.
I would have the SLP splitter if they would sell it to me :(
__________________

Kenne Bell 2.8 Polished & Black - Coolingmist Methanol Injection
Stillen Front Splitter - Havoc Side Skirts & Rear Diffuser
ICONZ Wheels & Nitto NT-05's - PFADT Springs
cfcoates is offline   Reply With Quote
Old 05-08-2011, 10:33 PM   #14
xBlackout_Camaro
 
xBlackout_Camaro's Avatar
 
Drives: 2011 Camaro SS/RS Cyber Grey
Join Date: Oct 2009
Location: Dallas, Texas
Posts: 502
love this camaro
__________________
"............don't lose sight of the fact that the Mustang is not only Ford's "Camaro" - it's also their "Corvette". "-FbodFather
xBlackout_Camaro is offline   Reply With Quote
Old 05-09-2011, 10:55 AM   #15
ajp
Imperial Blue Steel
 
ajp's Avatar
 
Drives: Camaro 2010 2SS/RS
Join Date: Jul 2009
Location: AZ
Posts: 1,657
Quote:
Originally Posted by cfcoates View Post
I would have the SLP splitter if they would sell it to me :(
Here's to wishful thinking:

http://www.camaro5.com/forums/showthread.php?t=141948

See post #8
ajp is online now   Reply With Quote
Old 05-09-2011, 11:37 AM   #16
VTimHokie85
 
VTimHokie85's Avatar
 
Drives: 2010 SS/RS L99 SIM
Join Date: Sep 2010
Location: Herndon, VA
Posts: 125
looks sooooo good. This combo is what i will be putting on my SIM. Any SIMs out there have these 2 items on their SIMs? Black splitter and havoc diffuser
VTimHokie85 is offline   Reply With Quote
Old 05-09-2011, 11:54 AM   #17
xpanda305x
Banned
 
Drives: Dark Knight
Join Date: Nov 2009
Location: Gunshine State
Posts: 3,162
I <3 the whinying! and the car itself!
xpanda305x is offline   Reply With Quote
Old 05-09-2011, 12:36 PM   #18
cfcoates
 
Drives: 2010 Camaro CGM 2SS/RS
Join Date: Aug 2009
Location: US
Posts: 136
Quote:
Originally Posted by ajp View Post
Here's to wishful thinking:

http://www.camaro5.com/forums/showthread.php?t=141948

See post #8
Wow, that would be awesome
__________________

Kenne Bell 2.8 Polished & Black - Coolingmist Methanol Injection
Stillen Front Splitter - Havoc Side Skirts & Rear Diffuser
ICONZ Wheels & Nitto NT-05's - PFADT Springs
cfcoates is offline   Reply With Quote
Old 05-09-2011, 02:04 PM   #19
ZED SLED
a.k.a. mclark10
 
ZED SLED's Avatar
 
Drives: 2013 CRT ZL1 Vert M6, 2011 Equinox
Join Date: Jul 2009
Location: Cortland, NY
Posts: 4,395
That does look good. And good call on not painting the splitter. I just had the Stillen splitter and side skirts painted and installed and there were issues with pin holes in the pieces, especially the splitter. As soon as sealer was applied the pieces looked like foam rubber and had to be filled and sanded multiple times to get them to look right. Even after topcoat there were a few that had to be addressed. Don't know if they're all like that or it was just the kit I got was worse. Luckily my install/paint guy is obsessive and he made it look right. Anyone planning to buy this kit beware that you might have the same issues. What was to be a 3 day paint/install ended up taking 8 days, and the install price reflected it.
__________________
Under hood airbrush by JT's Custom Paint Garage
Moroso CC, CAI Inc intake


(Click above image to learn about UpstateC5)
ZED SLED is offline   Reply With Quote
Old 05-09-2011, 02:12 PM   #20
brandotron
I am the internets.
 
brandotron's Avatar
 
Drives: dangerously
Join Date: May 2009
Location: Redondo Beach, CA
Posts: 12,719
Looking good!
__________________
brandotron is offline   Reply With Quote
Old 05-09-2011, 02:32 PM   #21
cfcoates
 
Drives: 2010 Camaro CGM 2SS/RS
Join Date: Aug 2009
Location: US
Posts: 136
Quote:
Originally Posted by mclark10 View Post
That does look good. And good call on not painting the splitter. I just had the Stillen splitter and side skirts painted and installed and there were issues with pin holes in the pieces, especially the splitter. As soon as sealer was applied the pieces looked like foam rubber and had to be filled and sanded multiple times to get them to look right. Even after topcoat there were a few that had to be addressed. Don't know if they're all like that or it was just the kit I got was worse. Luckily my install/paint guy is obsessive and he made it look right. Anyone planning to buy this kit beware that you might have the same issues. What was to be a 3 day paint/install ended up taking 8 days, and the install price reflected it.
Ouch, sounds very painful :( Do you think its possible the sealer that was used wasn't compatible with the urethane? I know that there are different products made for different surface materials, and using the wrong one would absolutely cause the problems you saw with yours.

I am looking forward to not having to repair the splitter after every few minor pavement scrapes like I did with the fiberglass ACS splitter.
__________________

Kenne Bell 2.8 Polished & Black - Coolingmist Methanol Injection
Stillen Front Splitter - Havoc Side Skirts & Rear Diffuser
ICONZ Wheels & Nitto NT-05's - PFADT Springs
cfcoates is offline   Reply With Quote
Old 05-09-2011, 03:01 PM   #22
ZED SLED
a.k.a. mclark10
 
ZED SLED's Avatar
 
Drives: 2013 CRT ZL1 Vert M6, 2011 Equinox
Join Date: Jul 2009
Location: Cortland, NY
Posts: 4,395
Quote:
Originally Posted by cfcoates View Post
Ouch, sounds very painful :( Do you think its possible the sealer that was used wasn't compatible with the urethane? I know that there are different products made for different surface materials, and using the wrong one would absolutely cause the problems you saw with yours.

I am looking forward to not having to repair the splitter after every few minor pavement scrapes like I did with the fiberglass ACS splitter.
There is always the chance of that. The guy that did it has a custom paint shop and he has done a lot of this type of work so I'd hope he wasn't hood-winked by something like that. But you never know. I've been going to him for the past couple of years and have never had any other issues. I've had my share of front underside scrapes and wheel curbings as well. After just spending $4k on wheels and GFX I hope I've learned how long and wide this car really is.
__________________
Under hood airbrush by JT's Custom Paint Garage
Moroso CC, CAI Inc intake


(Click above image to learn about UpstateC5)

Last edited by ZED SLED; 05-10-2011 at 07:02 AM.
ZED SLED is offline   Reply With Quote
Old 05-09-2011, 07:03 PM   #23
SlowSS


 
SlowSS's Avatar
 
Drives: 2013 Camaro 2SS/RS 1LE
Join Date: Sep 2010
Location: Commerce, GA
Posts: 3,817
lookin good!!
__________________
SlowSS is offline   Reply With Quote
Old 05-09-2011, 07:07 PM   #24
linkwpc
The punching cat
 
linkwpc's Avatar
 
Drives: '10 Camaro SS Black W/Hugger&W/IOI
Join Date: Nov 2007
Location: Torrance, CA
Posts: 4,032
Very nice! I like!
__________________
My car build (COTW 7/23/12) - - - - - - > CLICK HERE! : http://www.camaro5.com/forums/showthread.php?t=80725
linkwpc is offline   Reply With Quote
Old 05-09-2011, 07:07 PM   #25
propazoid
 
propazoid's Avatar
 
Drives: 2011 2SS RS + Transformers Package
Join Date: Mar 2011
Location: New York
Posts: 13
Love that rear diffuser!

-Zoid
propazoid is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Stillen front splitter V6 rtcat600man Cosmetics and Lighting Modification Discussions 16 02-17-2012 03:44 PM
STILLEN Splitter & Spoiler installed, Blacked out Demon Hunter Camaro Photos | Spyshots | Video | Media Gallery 33 01-19-2011 04:28 PM
Installed the V6 Stillen splitter too! LosingReality Cosmetics and Lighting Modification Discussions 29 09-21-2010 11:52 AM
V6 Stillen Splitter jagan323 Cosmetics and Lighting Modification Discussions 27 08-20-2010 03:08 PM
Camaro Front Splitter from STILLEN linkwpc USA - California 11 03-15-2010 08:24 AM


All times are GMT -5. The time now is 01:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.