Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Kraft Werks
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Members Classifieds - Parts for sale or wanted > Transmission / Driveline

Transmission / Driveline Shifters, differentials, gears, rearends, clutch

Reply
 
Thread Tools
Old 01-14-2011, 08:15 AM   #1
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,318
GTO remote clutch reservoir install kit

If you have been following thread
http://www.camaro5.com/forums/showthread.php?t=34085
at post # 237 there are pictures of how I installed the GTO clutch reservoir on my SS. I have been given permission by the site owner to list the parts I used in my install. I have enough parts for 4 kits if anyone is interested and already has a GTO clutch reservoir. Price for the kit is $28.00 shipped in the USA and consists of :
17.5” of the EPDM hose
2 EPDM caps for the brake master cylinder ( 1 is a spare )
2 small zip ties ( one for the EPDM cap and the other one goes loosely around the new clutch hose and the wires going into the brake master cylinder reservoir )
The same mounting hardware I used when mounting my reservoir to the bracket for the battery cable.
Thanks...Ed M.
Attached Images
  
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers & rotors, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, ZL1 Brembo Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 wheels w/Vredestein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat
flht99b is offline   Reply With Quote
Old 01-14-2011, 08:20 AM   #2
NVMYSS
 
NVMYSS's Avatar
 
Drives: 2010 Camaro SS
Join Date: Jun 2009
Location: Metairie, LA
Posts: 422
So if I get this kit the only thing else I need to get is the GTO clutch reservoir?
NVMYSS is offline   Reply With Quote
Old 01-14-2011, 11:00 AM   #3
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,318
Correct.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers & rotors, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, ZL1 Brembo Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 wheels w/Vredestein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat
flht99b is offline   Reply With Quote
Old 01-14-2011, 11:25 AM   #4
The Stig
knows 2 facts about ducks
 
The Stig's Avatar
 
Drives: ...and they're both wrong
Join Date: Aug 2009
Location: The HMS Invincible
Posts: 26,680
PN sent
__________________
Click to view my build thread
The Stig is offline   Reply With Quote
Old 01-14-2011, 02:25 PM   #5
Redemption
Just Because!
 
Redemption's Avatar
 
Drives: 2010 SIM 2SSRS
Join Date: Jun 2010
Location: San Jose, Ca
Posts: 7,115
I'll take one!

J
Redemption is offline   Reply With Quote
Old 01-14-2011, 04:13 PM   #6
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,318
Redemption PM sent.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers & rotors, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, ZL1 Brembo Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 wheels w/Vredestein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat
flht99b is offline   Reply With Quote
Old 01-16-2011, 12:49 PM   #7
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,318
2 kits left.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers & rotors, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, ZL1 Brembo Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 wheels w/Vredestein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat
flht99b is offline   Reply With Quote
Old 01-17-2011, 08:49 AM   #8
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,318
1 kit left.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers & rotors, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, ZL1 Brembo Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 wheels w/Vredestein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat
flht99b is offline   Reply With Quote
Old 01-21-2011, 12:04 AM   #9
Alain

 
Alain's Avatar
 
Drives: 2010 SS, RS, Manual. 2012 F150, FX4
Join Date: Dec 2009
Location: Northern NJ
Posts: 1,567
Any more left? Pm me please
Alain is offline   Reply With Quote
Old 01-21-2011, 06:59 AM   #10
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,318
Alain, PM sent.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers & rotors, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, ZL1 Brembo Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 wheels w/Vredestein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat
flht99b is offline   Reply With Quote
Old 01-22-2011, 09:37 AM   #11
Never Satisfied
220/221 whatever it takes
 
Never Satisfied's Avatar
 
Drives: '10 1SS/RS M6 SW
Join Date: Jun 2010
Location: Lafayette In
Posts: 998
I'll take one if you have it....
__________________
2010 Summit White 1SS/RS M6
479rwhp/451rwtq 12.03 @ 121.62mph (1.9 60')
Never Satisfied is offline   Reply With Quote
Old 02-07-2011, 12:53 PM   #12
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,318
Still have 1 kit left the that's it.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers & rotors, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, ZL1 Brembo Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 wheels w/Vredestein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat
flht99b is offline   Reply With Quote
Old 02-16-2011, 12:05 PM   #13
TC
 
TC's Avatar
 
Drives: 2010 VR 2SS-RS
Join Date: Dec 2008
Location: Michigan
Posts: 369
Any chance in just buying some of that tubing? Already have everything else. Do you know the ratings on the tube you have? Stuff is harder to find than I thought it would be. VW dealers in my area don't have it either!
TC is offline   Reply With Quote
Old 03-06-2011, 05:56 PM   #14
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,318
Still 1 kit left
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers & rotors, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, ZL1 Brembo Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 wheels w/Vredestein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat
flht99b is offline   Reply With Quote
Old 04-18-2011, 06:58 PM   #15
IamJacksCamaro
 
IamJacksCamaro's Avatar
 
Drives: Camaro LS M6, Fiero, Ford F100
Join Date: May 2010
Location: Ohio
Posts: 639
Do you still have a kit?
IamJacksCamaro is offline   Reply With Quote
Old 05-15-2011, 11:49 PM   #16
Silver2SSRS6spd
Prefer to be blown!
 
Silver2SSRS6spd's Avatar
 
Drives: 2010 Silver/Black 2SS/RS 6 Speed
Join Date: Mar 2010
Location: Nor-Cal
Posts: 2,672
Do you still have a kit left?
__________________
MagnaCharger TVS-2300 513rwhp 490 rwt and a radical suspension under the car.
Silver2SSRS6spd is offline   Reply With Quote
Old 05-16-2011, 08:39 AM   #17
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,318
Quote:
Originally Posted by Silver2SSRS6spd View Post
Do you still have a kit left?
Sent you a PM.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers & rotors, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, ZL1 Brembo Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 wheels w/Vredestein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat
flht99b is offline   Reply With Quote
Old 05-16-2011, 01:35 PM   #18
JSC81
 
JSC81's Avatar
 
Drives: 2010 1SS/RS M6
Join Date: Apr 2010
Location: FT BENNING, GA
Posts: 396
I'm interested, sent you a pm
__________________
JSC81 is offline   Reply With Quote
Old 06-03-2011, 05:08 AM   #19
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,318
ttt
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers & rotors, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, ZL1 Brembo Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 wheels w/Vredestein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat
flht99b is offline   Reply With Quote
Old 06-03-2011, 11:22 AM   #20
Redemption
Just Because!
 
Redemption's Avatar
 
Drives: 2010 SIM 2SSRS
Join Date: Jun 2010
Location: San Jose, Ca
Posts: 7,115
These are great kits guys! Everything you need!!




Sent from my iPhone using Tapatalk
__________________
Redemption is offline   Reply With Quote
Old 06-03-2011, 12:01 PM   #21
Silver2SSRS6spd
Prefer to be blown!
 
Silver2SSRS6spd's Avatar
 
Drives: 2010 Silver/Black 2SS/RS 6 Speed
Join Date: Mar 2010
Location: Nor-Cal
Posts: 2,672
I'm installing mine next week, are there any written instructions out there? Can this mod be done without having to bleed the system?
__________________
MagnaCharger TVS-2300 513rwhp 490 rwt and a radical suspension under the car.
Silver2SSRS6spd is offline   Reply With Quote
Old 06-03-2011, 12:16 PM   #22
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,318
See post #4 for my instructions in thread:
http://www.camaro5.com/forums/showthread.php?t=145890
Yes, mod can be done without bleeding either the brake or clutch system. Actually the clutch system self bleeds just by actuating the clutch pedal as in normal shifting.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers & rotors, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, ZL1 Brembo Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 wheels w/Vredestein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat
flht99b is offline   Reply With Quote
Old 07-27-2011, 08:51 AM   #23
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,318
Last kit still available.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers & rotors, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, ZL1 Brembo Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 wheels w/Vredestein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat
flht99b is offline   Reply With Quote
Old 08-01-2011, 05:37 PM   #24
The 2010 Sin
CorkTulsa.com
 
The 2010 Sin's Avatar
 
Drives: 2010 2SS BLK, 2013 2SS CRT
Join Date: Feb 2010
Location: Tulsa, Oklahoma
Posts: 2,847
PM me cost etc. I'd like to have a kit.
__________________
The 2010 Sin is offline   Reply With Quote
Old 08-03-2011, 01:37 AM   #25
olblue75

 
olblue75's Avatar
 
Drives: Inferno Orange 2SS/RS LS-3
Join Date: Dec 2009
Location: Qandahar, Afghanistan.
Posts: 1,005
Where do you get the reservoir???????
olblue75 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pfadt Camaro Rear Toe Link Reinforcement Kit Install write-up PfadtRacing Suspension / Brakes / Chassis 9 01-28-2014 07:15 PM
Unbeatble Prices on ACT / Fidanza / Hurst / Mishimoto / MTI / SLP / Spec / More maperformance Transmission / Driveline 18 10-26-2010 02:16 PM
Complete SubThump install from a Novice Susantroy1 Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum 62 09-06-2010 03:17 AM
Lingenfelter install kit for Camaro ring and pinions jrh@lpe V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) 0 08-28-2010 10:21 AM
STS Remote Mount Turbo Kit for V6 ZNOLMT Forced Induction - V6 102 06-09-2010 12:18 PM


All times are GMT -5. The time now is 07:09 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.